3com 3CRWX275075A Wireless LAN Managed Access Points
VPN: 3CRWX275075AVendor: 3Com
Price: $0.00 - $0.00 CAD from 0 stores » Email this product to a friend » Write a review
» Discuss on forum » Post your deal
Product Specifications
| Model | |
| Brand | 3com |
| Model | 3CRWX275075A |
| Spec | |
| Standards | IEEE 802.11a, 802.11b, 802.11g, 802.11i, 802.3, 802.3af, 802.1X |
| Device Management | Remote management with Web browser over SSL or HTTPS; command line interface over SSH v2 or Telnet |
| Data Rates | up to 54Mbps |
| Security | 48/104-bit WEP encryption (v1 and 2)TKIP WPA and WPA2 (IEEE 802.11i/RSN) 64- and 128-bitAES encryptionMultiple broadcast SSID support at the MAPIEEE 802.1X network loginIEEE 802.11i or 802.1X RADIUS authenticationAccess Control Lists (ACLs) and VLAN support at the wireless switch/ controller Kensington Security Slot |
| WPA/WPA2 | WPA2 |
| Frequency Band | IEEE 802.11a: 5.15-5.825 GHz;IEEE 802.11b/g: 2.4 GHz |
| Antenna | Two external dual-band 2.4-2.48/5.15-5.825 GHz, 2dBi omnidirectional antennas |
| Receiver Sensitivity | 802.11a6 Mbps: 9 Mbps: 12 Mbps: 18 Mbps: 24 Mbps: 36 Mbps: 48 Mbps: 54 Mbps: 802.11b/g1 Mbps: 2 Mbps: 5.5 Mbps: 6 Mbps: 9 Mbps: 11 Mbps: 12 Mbps: 18 Mbps: 24 Mbps: 36 Mbps: 48 Mbps: 54 Mbps: |
| Operating Range | IEEE 802.11a: up to 50 meters (164 ft) transmit and receiveIEEE 802.11b/g: up to 100 meters (328 ft) transmit and receive |
| Modulation | OFDM, CCK |
| System Requirements | 3com Wireless LAN Controller WX4400, Wireless LAN Controller WX2200, Wireless LAN Switch WX1200, or WXR100 Remote OfficeWireless LAN Switch; 3com Wireless LAN Switch Manager recommended for MAP operation |
| Interface | Ethernet Port |
| LEDs | Power, 10/100 Mbps, IEEE 802.11a, 11b, or 11g activity |
| Ports | One 10BASE-T/100BASE-TX IEEE 802.3af-compatible PoE port with auto-negotiation |
| Dimensions | 6.5" x 3.3" x 1.3" |
| Weight | 7.0 oz. |
| Temperature | -10 to 40°C |
| Humidity | 10 to 95%, Non-Condensing |
| Features | |
| Features | Performs packet encryption over the air for dynamic WEP, TKIP, and AESAllows independently encrypted and isolated subnets or VLANs while using the same SSIDRequires no pre-staging or pre-configuration of access points so new or replacement MAPs inherit configuration information from the wireless LAN switch or controllerAllows MAPs to be directly and/or indirectly connected to their managing wireless LAN switch and/or controller allowing a wide variety of flexible deployment scenarios Optimizes RF cell size and support international requirements with automated transmit power and radio channel assignment Provides comprehensive MAP control and management as MAPs are not operational in stand alone mode. All Attributes such as channel number, power level, SSIDs, and security settings are all handled by the wireless LAN switch or controller for additional security |