COOLER MASTER Hyper 212 Plus RR-B10-212P-G1 120mm sleeve CPU Cooler

Comment:
Keeps my O.C. i7 2600k very pleased. Barely fit in Rosewill Destroyer case. Great installation videos identified on Newegg. If you're confused with how this installs, then just refer to them.

Comment:
Cheap and highly effective. Added a second 120mm fan for some nice push pull. Keeps my 2500K chilled out. Best bang for your buck by far. Unless you are going for high OCs, this is all most builds will need.

Comment:
Great cooler, has brackets to install a second fan to achieve a push-pull situation which is helpful to pushing the fan further than it is supposed to.

Comment:
6-10 degrees lower than my stock core i7 920 cooler, if you follow the manual it definitely isn't difficult at all to install. Able to mount a second 120 mm fan, which i did and i am not positive if it is making a difference but i would like to believe so. Yes we heard it was big but i believed it would fit in my nzxt zero 2 full tower but... with my case side fans it barely fit.. i literally had to squeeze the case door to fit in the screws to the door and close it. If you have a Full tower that came out 7 months ago till now, it is most likely that you will not have the difficulty of fitting it. Of course case fans may well get in the way.

Comment:
This HSF is the best bang for the buck on the market. Coolermaster doesn't disappoint.

Comment:
Employed for my first install and works wonderful... oc'd my 2500k to four.5 with low temps None so far It is huge, barely fits in my antec nine hundred two v3

Comment:
If you haven't bought this CPU cooler yet, go buy one NOWits easy to install and works amazingly well

Comment:
I got this for a frends build it keeps his cpu cool and its not very loud.

Comment:
Keeps my rig cool, quiet running and for price can't be beat.

Comment:
pros:great price/performancecons:installing is a b****Chances are you dont have much of a choice if you dont want to spend too much

Comment:
Extremely very good non

Comment:
An exceptionally efficient cooler for about 30 dollars. Sold!Keeps my new, moderately overclocked I7-2600K at about 105(F) degrees. Rather bulky, wants a rather spacious case to home the beast.Instruction for mounting the cooler were lacking in detail, however anybody who has does their analysis can figure it out effortlessly. Didn't much like how the crossbar was installed - the gap to get it spread and slide thru was a little snug and required some maneuvering to get it in. Not genuinely a con just additional of a slight annoyance.

Comment:
OC my 2500K to 4.4GHz with stable temps. This product is small but super-effective. The price for this is great.

Comment:
my first larger cpu cooler. very easy to install and upgrade with another 120mm fan. great buy for value for what it does and does well.

Comment:
This is a very large CPU cooler. Make sure it can fit in your case before buying, otherwise, this is a great cooler. I am running it on a Phenom II X4 BE, and it is keeping it very cool under 49C at full load for a while. It isn't very loud, and can have a push-pull config with another fan. This is not the best solution for air-cooling, but it preforms well for the price. Much better than a stock CPU cooler.

Comment:
Buyed this one to replace my end of life fan from my stock Core2Duo's heatsink. Be aware that you may have to completely remove your motherboard from the computer case for bracket installation. The only problem I had was installing the rubber screw for the fan on the heasink. It's working better than the stock cooler so far, and quieter!

Comment:
Fantastic air cooler. Keeps my quad core phenom processor nice and cool in the Fractal Define R3 case. And after setting the fan speed to auto in the motherboard settings, it is virtually silent, the temperature never goes up high enough to make this fan spin fast enough to be audible

Comment:
replaced an old H50 cooler with the Hyper 212. Using 2 coolermaster fans in push-pull. The temps are about 5 degrees cooler on all cores than before (before Thermal Paste has cured too). Best cooler for the money.

Comment:
It works well, I use a core i5 2500k and get 35 on idle, and 50-52 on load. I use it with MX-2 cooling compound and cant complain about that performance for $22. When I overclock to 4.3 GHz from 3.3 GHz it runs at 62 degrees max, which I am also happy with.

Comment:
I was a bit worried when installing it thinking it wouldnt fit into my case, but when it was settled in it cooled my CPU right down and I am very happy with it.

Comment:
Cools CPU as advertised (Maybe even far better).Rear Mounting Bracket insures stable mount (It's genuinely big)CostConsists of thermal pasteIncorporate mounting rails for optional 2nd Fan Directions are awful.Hard to install by one individual unless you have case with rear access Does what it says and the price is effortless to take.

Comment:
Nice cooler well made, great for an other fan on it.You still need to whatch the size of your case. The cooler itself is kind of big.But this cooler defenetly a good price/buy.

Comment:
Does maintain my cpu at good low temps. I OC my cpu to 166-173MGH (stock @ 133 i5 750) 3.63Not a high OC, most go for 4+, but not messing with voltage.Temps. get up to 50-60 when OC-ed on very stressed load (test on FFXIV on high settings) Not poor at all for the cost.Depending on room temp, sits at idle of 15-25 C Not pretty sufficient ^^It IS massive, but as advertised, can't deduct an egg. Excellent value. Was afraid of it becoming machined wrong.. but much more than most likely the other reveiwers were just worried over nothing. (and sanded it down to destroy the fine heatsink) Quite a few "heatpipe direct get in touch with" heatsinks are like that.I did replace the fan with a controlled blue LED fan. A great deal happier with. Not sure if the fan that came with it worked incredibly properly. Plugged into one more fan connector and has it's moods (some times have to hand start out, not superior) could be simply because I Really should have it connected to mobo, but not seriously worried about it. All in all, good heatsink, and for the price of 35 USD, nice value compared to the higher end coolers.

Comment:
Cooler Master got a winner on their hands. Parts are pretty much the same for any socket (Less cost to them), which means less cost to us. Very good cooler for the price.

Comment:
Probably one of the best bang-for-buck heat sinks. Would definitely recommend for anyone still using the stock cooler. Not the prettiest thing out there, but it gets the job done.