COOLER MASTER Hyper 212 Plus RR-B10-212P-G1 120mm sleeve CPU Cooler

Comment:
Great cooler for the price, keeps the temperatures down, and pretty quiet as well.

Comment:
Installed this to replace an aging OCZ Vendetta HSF which was starting to show it's age. Requires removal of the stock retention mechanism and backplate so you may have to remove the MB from case. In top to bottom orientation, it may obstruct the memory slot on some baords. Overall an excellent product for the price.

Comment:
Great cooler for the budget overclcoker. didnt pick up the evo for it being more than 5 bucks more than this

Comment:
Wow oc'ed my amd athlon 640 from 3.0 to 3.6 ghz stable overclock with this fan, highly recommend it. Keeps cpu frosty, suprised what a got for 25 bucks.

Comment:
What can I say. This is the first one of these I have bought and man am I impressed what $25 bucks got me. First off, this this is pretty big, far bigger then I expected! Second, it's quiet! And most important it works great! Put this on a 3570K and the processor temps barely budge at stock clocks!

Comment:
It's cheap, it's quiet, and it's effective, what more do you need? It's also quite easy to install. Comes with everything you need to turn it into a push/pull configuration except the extra fan. Push/pull should result in a couple extra degrees of cooling.

Comment:
Had this in my rig for over a year now and never had a single issue.Would buy it again.I'm very happy with this purchase.

Comment:
This HSF was a little larger than the picture looked, but it fit easily into my full tower case. Installation was relatively easy and the HSF is not going anywhere. Using speedfan, my CPU and all cores are running at 15C or less! This is a Core 2 Quad LGA775 processor. I haven't owned it for long but I'm impressed already.

Comment:
I use this HSF on a i5-3570k overclocked at 4.3ghz. Keeps my CPU under 27C at idle and under 60C at load using only 30% of max fan speed (660 RPM). Make sure your case can fit this 120mm heatsink and fan.

Comment:
does the cooling job, 120mm too so it's not noisy at all

Comment:
Very good product, especially for first time builders like me. Easy to install and great results.

Comment:
Great deal on Black Friday sale.

Comment:
I installed this on a Gigabyte U3-B3 񡼃 socket) mobo operating an i7, 2600K inside an Antec Illusion 300 case. To verify cooling differences involving the stock cooler and this a single I compared temperatures although running the Windows Performance Index Test which runs and holds the CPU for about 1 minute at aproximately 70% of its max output. Also, I ran the test with the system overclocked to 4 GHZ. In the course of the test the stock cooler would consistenly hit 70C. The precise identical test working with the Hyper 212Plus hit a highest temperature of 50C - now that is a big difference. Not a CON but guidance to these installing this fan. You absolute have to take the time to view the installation video readily available on Newegg to conserve oneself time and frustration. I did, and I am particular that if I did not points would not have gone so smoothly. Interestingly, the Antec Case output fan ends up just a handful of inches (about 3) away from and in line with the cooler, so it in fact assists the fan on the cooler in a push pull style. Also, the top rated fan is close sufficient to assist in the side direction. I installed the cooler without having taking out the mobo because the Antec case has a large hole below the CPU - ideal. I had to move my two sticks of RAM from sockets 1 and 3 and placed them in sockets two and four. Fascinating, the RAM overall performance test remained the similar, a 7.eight out of a feasible 7.9.If I ever need to have to use the RAM sockets 1 and 2, I can easily move the fan to the other side and spot it to PULL air so that it does not fight the case output fan - no difficulty, there is enough room to do just that if required in the future.1 more factor. I strongly suspect that provided the close proximity to the cooler of my rear and top case fans, the cooler fan is seriously not necessary.

Comment:
Very easy to install, it actually works really well and it keeps my cpu relative cool and i am using an i5 760 overclocked to 3.8. It is actually fairly quiet for what it does

Comment:
Very impressed, much stronger mount than the stock Intel plastic plugs, perhaps that is what this i5-750 needed.

Comment:
Very good cooler, i can hardly hear it.The installation can be a little tricky.The manual had a warning information about the back-plate in the LGA1155 sectioned that belonged to the other socket group sections, so make sure to look carefully at the drawings.

Comment:
Massive heatsink, huge fan, huge air motion. Drops CPU temperature speedily, and keeps it low. Adjustable for either vertical or horizontal airflow. Loudest fan in my desktop, but it can be loud as long as it does its job. Bit of a pain to set up the backplate, but worth the trouble - see Other thoughts for details. I set this fan in a vertical airflow configuration to take benefit of my pc case's airflow design (bottom to best, to obey a certain law of physics). Attempted operating a burn test on my 970BE at stock speed - temperature never rose above 45C. Temperature ranges from 20C ~ 35C below normal use. Mileage may vary.

Comment:
Wow! For the value this is an unbeatable aftermarket cooling remedy! 2500K idle was hivering about 25C never hit 40C in prime 95 100% load at 3.3Ghz. I OCed to 4.two Ghz and it under no circumstances hits 60C! None! Installation was a snap! Just watch the installation video right here at Newegg. With the bracket in the back and front this feels like a nice and sturdy set up.

Comment:
great upgrade for me, just had a stock cooler b4 and this dropped my cpu temps by a decent amount.

Comment:
Wonderful cooler. Fan is really quiet as well.- CPU about 45C with high activity- CPU < 30C at idle time.- Comes with thermal compound. - Hard to install. If it's your initially time working with this item, you require to watch video on the product page to find out how to install this.

Comment:
Awesome heatsink, for the money unbeatable, would recommend

Comment:
Installed in a 775 motherboard in a Rosewill Challenge case. Keeps my dual core at 37c using stock clock speeds. The fan is quiet so you wont hardly hear it. N/A I didn't assume it was going to fit in the case at 1st. On the other hand, once you begin screwing it down to the motherboard additional room was created offered it a great fit.I will be using this resolution for each and every new personal computer I develop.

Comment:
Picked this up with my i5-3570k and it does great. CPU stays nice and cool, definite recommendation for anyone looking for a well priced cooler.

Comment:
What are you waiting for? BUY IT!

Comment:
I'm still buying these when they come up on sale and try to keep a spare at all times.Not the best performer these days, but still miles ahead of stock cooling, and can usually be had for a very reasonable price.Fairly easy to install.Honestly with these on the market at reasonable prices, there's absolutely no reason anybody should be running noisy stock cooling.