COOLER MASTER Megaflow 200 R4-LUS-07AR-GP Red LED Case Fan

Comment:
Fantastic airflow and silent. none Didn't care for the self tapping screws, but not enough to lose an egg. Wonderful fan.

Comment:
Great air flow, silent, fit my thermaltake v9 situation perfectly none

Comment:
Uncomplicated to install, and a wonderful searching fan. Simply adds a tiny bit of attitude to any situation. I use this as a side fan on my CoolerMaster HAF 922 and it functions wonders keeping my case consistently cool (around 29°C)... though of course this is in conjunction with 2 other 200mm fans, a 120mm rear fan and a 140mm bottom fan. Not much of a 'Con' for me, even so others might want to know that this fan does get relatively noisy at higher RPMs... If you want a quieter fan, this possibly isn't for you. On the other hand, if you don't mind a tiny bit of noise, or don't mind drowning it out by turning up your volume a bit, then this is definatly a wonderful get. Program:ASUS Crosshair IV Formula MOBOAMD Phenom II x6 core 1055T8GB Ram Windows 7 64bitXFX Radeon HD 5850CoolerMaster HAF 922 Situation

Comment:
Really quiet fan, but displaces quite a bit of air. A ideal fit for the Missing 200mm fan in the Coolermaster HAF X case. None really I just wish they integrated that 4th 200mm fan in the HAF X by default, but otherwise, excellent fan.

Comment:
Extremely quiet fan None This fan is really a bit bigger than I believed it would be at initial. It was a excellent fit for my HAF 922 situation.

Comment:
a fan with vibrant leds and very good construction none so far superior airflow, alternative for molex or three pin fan controller

Comment:
Its quietIt pushes a lot of airYou can use three pin to molex to connect it The Cooler Master 200mm fan does not have the correct screws to fit the Cooler Master HAF-X situation as a second leading exhaust fan. I had to get some from the tough ware store, but the worked fine for ũ.07 The screws they did have were bigger and looked like the screws I got for the 120mm fan for the GPU cooling duct. was the 200mm made as a front fan or one thing for the 932 or one thing?

Comment:
I like the LED fan color that matches with my Haf-X. For the value I think that this fan is a good selection. The screw that came with the fan doesn't fit the Haf-X.

Comment:
*I have a Nvidia GeForce GTX 470 superclocked and just before I put this fan in, it would overheat from playing almost any game. The fans on the graphics card would not awesome it off enough. I place this as an intake side fan for my Haf 922 case and now I have NO challenge with my graphics overheating. It used to get so hot that my personal computer shut off, now I can leave my computer running for days(yes I know that isn't great for it, I do shut it off each night, I did test letting it stay on for about 10 hours on my crysis game although, in no way shut off and the graphics card fans under no circumstances turned on)*The LEDs are good*Matches my other fans and situation*GREAT airflow Slightly noisy. I had my laptop or computer on the desk next to my head and seeing as I have 3 200mm fans, a coolermaster v8, and two 120mm fans, it can get a small noisy. I'd rather have noisy instead of overheating even though, so I shouldn't even have a complaint. Glad I picked this fan to blow awesome air directly on the motherboard region (:

Comment:
Fantastic fan, no complications with it. On the other hand Comes with the incorrect screws to fit the HAF 942. Some of the screws offered with case barely grabbed the threading for a few turns. If you get this fan as the additional fan for the HAF 942, as I did, you will have difficulties with the wires for the USB three. fitting. Docked an egg for the the case issue with the USB 3. wires and the wrong screws getting furnished. Both are fixable, but for the $$ for the case and the fan, somewhat aggrevated. Have study some gave up....

Comment:
Really quiet, moves a ton of air, Gorgeous red glow with no a hint of pink or orange to it. Moves as significantly air as two 120mm fans though getting as quiet as only a single of them pricey, but still worth it

Comment:
Ordered 3 of these and they all work well but one rubs or something and I couldn't figure out what it was so I RMA'd it and its working great so far.

Comment:
Extremely, very quiet. Moves a lot of air and barely tends to make a sound. Fantastic addition to the HAF 922 case. Red l.e.d. looks fine and isn't also bright. none

Comment:
Looks great with the CM 922 Haf. It's large but there is plenty of room for it in the 922 Haf. It's a fan it does its job. Sort of tricky to get the screws to go into the plastic. There are no thread holes in the plastic. It felt as if it were going to break the whole time installing....felt like it was but DID NOT break. It was so hard getting them to go in I truly stripped the threads on the prime of one particular of the screws trying. So three screws went in the 4th went 3ǚ the way in. Which essentially is not an situation with how it is functioning. Excellent item. Looks fantastic. Does its job.

Comment:
Moves a lot of air, look great, sounds very quiet, great LEDs.My CPU heatsink makes way more noise than these ever could. If you need higher airflow you're probably better off getting 2 120mm fans stacked next to each other. I'm using 2 of these in a push/pull configuration in the front and top of my HAF912, along with the 2 120mm fans that came with the case in the back and side. The LEDs are perfect. they reflect nicely off the transparent casing and fan while not being too bright. My last computer had a massive LED light around the power button and at night it very noticeably jet a massive beam of light across the room and was distracting to have caught in your eye while gaming. These are bright enough to make your case glow (in daytime or nighttime) without being irritating.only problem I had were the screws. I was unable to use the screws this came with in the front of my HAF912 due to their thick size.. Instead I used them to mount a 120mm fan to the side panel. This review was modfied by poster h 07-16-12 01:35 AM This review was modfied by poster @ 07-16-12 01:42 AM

Comment:
Red LEDs - Quiet - Moves a lot of air. You have to solder the fans to get them to work with the HAF-X case LED switch. Directions simple to uncover on the internet. Cooler Master must have created these (or an additional model) particularly for the HAF series of circumstances. I would acquire these once more. My situation looks outstanding now.

Comment:
The red LED is the great brightness. The clear plastic is truly pleasing to the eye. Fit perfectly. Price tag, clearly. Not certain it was worth the 25 bucks. But i felt it was important with my Haf 922 It does its job.

Comment:
Relatively vibrant LEDs. 4 LEDs. Moves a lot of air. None, but see other thoughts. When I initially powered it up it created a clicking sound for about 30seconds so I was a small worried but then it stopped clicking and all is very good. Will be placing into my HAF X =)

Comment:
It functions as advertised. Fantastic air flow. Quiet. Very good Purchase. cost is negative but i nevertheless bought it. Coolermaster name brand is worth it I would like to see cooler master get a unique program for mounting there fans. Rather of giving screws that cut out threads maybe predrill the holes to make it simpler.

Comment:
Good fan perform perfectly silent Nice bright red led Need to have a lot more rpm and cfm for the cost Good fan

Comment:
Excellent fan, cools my tower with ease. The red glow is excellent None, works like a charm

Comment:
01: incredibly huge02: air flow is so greater than you can consider03: can fit to Haf X's optional fan position took one egg off due to the fact of did not come with the proper screw for the Haf X case. By the way, you require a special screw drive to install thin fan to the optional fan position. if you did it, you will know what I am talking about. You can install the screw from bottom, but still have a screw that is very tough to fit in. I take into account this is not the finest situation for consumer. General, it is good!

Comment:
Good airflow. Quiet. Red looks very good in a dark space. A bit pricey. But I knew when purchasing, so not adequate to dock an egg. It would be nice if CoolerMaster offered a non-LED black version related to the ones that ship with the HAF X situation.The mounting screws should be black! Otherwise they don't match the HAF series circumstances.

Comment:
Virtually silent, excellent air flow. Looks great with red LEDS None Good fan for very good value

Comment:
Bought this for a new computer build. It works well, pushes a lot of air and pretty silent. Well suited for a HAF series case.