G.SKILL FTB-3500C5-D Fans

Comment:
Awesome light weight springy metal frame. Two replaceable quiet fans compared to a decade ago. Eight blue light leds easy to get to for black painting. It provides me flashbacks of being chased by police, awesum if you like these effects. Lazer thermometer reveals metal frame radiants temperature inside the case, plastic doesn't comparing the GSkill 1st trubulence fan. Clashes with CPU air cooler fins forcing miss alignment; any air blowing is better than no air movement. No three pin plug, it has wired molex adaptor, big error. Just place an 50 cent molex adaptor w/ 3pin wire in the package? I know, two fans can't not RPM sensed @ similar time. BIOS can disable the feature. GSkill has the reigns on CPU cooling (GOOD), so considerably a lot more believed could be put into the design and style. Memory fans are excellent for longivity of memory! GKill could mansard roof design and style frame to miss cpu cooler and then clip on all four memory clips. Manard pitch walled on CPU side would deflect CPU cooler fan turbulance Manufacturer Response:.Dear ClientThank you for your G.Ability purchase and critique. This is a quite insightful review as it provides feedback that we can use for future designs. Newly designed merchandise will constantly have slight flaws, so our purpose is to absorb as considerably feedback to develop a newer/better product every time. We don't strive for perfection, we strive for improvement. Thank youGSKILL HelpExcellent and consumer service are our best priorities.Tech Help Email: ustech@gskillusa.comRMA Dept Email: rma@gskillusa.comG.Skill Forum: http://www.gskill.us/forum/

Comment:
Produced MY COMP Appear PURTY. I DON'T Really SEE A Practical USE FOR THIS IF YOU HAVE Great AIRFLOW IN YOUR COMP, UNLESS YOU OVERCLOCK. THAT'S ABOUT IT, I Feel IT'S A lot more FOR AESTHICS THEN Something ELSE. NONE Truly. SEE THE PROS

Comment:
Tends to make a 3 degree difference for my technique temperature.Looks Cool. No off switch for LEDs.Doesn't clip on really effectively. Not seriously worth ฟ, LEDs are vibrant

Comment:
Fans will move air, they are safe in the vertical position, LED lights match my case. They are what I believed they were. Questionable integrity of DIMM mounting implementation They are what they need to be, great price, fashionable enough and securely mounted to my memory slots, albeit with questionable integrity. Manufacturer Response:.Dear CustomerThank you for your G.Skill purchase and overview. We are conscious of the mounting concerns on some motherboards, so that really should be addressed in the subsequent revision. On the other hand, the dual memory fans are excellent for overclocking or full slots. This memory cooler has proven to considerably decrease temperatures, so it is quite helpful in such instances. If you have any concerns or problems, please don't hesitate to speak to us straight. Thank youGSKILL AssistanceQuality and client service are our prime priorities.Tech Support Email: ustech@gskillusa.comRMA Dept Email: rma@gskillusa.comG.Skill Forum: http://www.gskill.us/forum/

Comment:
quiet nice addition on top of 8gigs gskill ram.will install on ANY ram noticed some other coolers will not. blue led i hate additional lights.

Comment:
Produced by GSkill.Cools RAM.Appears nice Blue LEDs. Exactly where is the really like for us Red LED lovers. practically nothing out there for us, and contemplating (most) gskill ram is red or black, i would have liked to see this match the ram. I purchased the new GSkill Sniper RAM which is 1.25v so I cant picture actually needing this, would only get it to make thinks even much more aesthetically appealing. But no red selection. :[

Comment:
gotta say it looks excellent and um is truly very quiet, dont get all the noise complaints at all, was even easy to set up on my board (asus Crosshair IV Formula) with a tuniq tower 120 extreme) it is a wee bit off center trigger of cpu cooler, and it nevertheless hangs on fine not a a single get it, its a good small fan set up=)

Comment:
Led's appear cool, cools my ram, stays on there, not quiet but not loud. 4 pin molex connector, it'd be nice if there was a 3 pin mobo fan connector. Folks will need to cease whining. Things to take into considerationɅ. yes it does stand about three inches off your motherboard, this is because some ram these days have monster heatsinks that stand that high.two. it is going to be a small unsturdy. this factor squeezes onto the ram clips themselves.3. you may well have to push the sides of it inward, as a result creating it squeeze tighter on your ram clips.

Comment:
Blue LED's to match the rest of my method, quite quiet and a tool much less design. Rather of rubber on the clamps it's foam. The fans tend to slide left and proper more than the memory slots but see other thoughts. I have the Asus M4A89GTD PRO/USB 3, the fans are capable to grip the side of the slot with the actual clips that lock the RAM in place but it doesn't seem to grip the side exactly where the RAM just slides in. I knocked off an egg for that but other than the these fans are excellent. Manufacturer Response:.Dear ConsumerThank you for your G.Skill buy and assessment. Glad to hear you like the memory cooler. With full slots or overclocking, this memory fan can greatly lower memory heat by moving air out of the region. Heat can easily get trapped in the slots area, so the fan will enable disperse it. If you have any future inquiries or issues, please feel totally free to get in touch with us straight.Thank youGSKILL HelpGood quality and consumer service are our leading priorities.Tech Assistance Email: ustech@gskillusa.comRMA Dept E-mail: rma@gskillusa.comG.Talent Forum: http://www.gskill.us/forum/

Comment:
1. It operates right out of the box, and it does the job - if not disturbed though.. 2. The light helps to see if fans do rotate. 3. I is pretty suitable for improvement. 1. Incredibly loose; the metal is so soft, you won't be capable to repair it hard enough. I would do these legs wider (like twice as). You can't be sure it's nevertheless there right after you moved a computer. two. The connector is old Molex for HD, no way to attouch to a motherboard. 3. I don't comprehend, why the complete building is so wide. 1. I got these clips reduce (leaving the legs), then I've bended legs, and drilled holes in them. Then, replaced normal screws Ɣ of them) which hold a mobo, with custom ones (which typically are beneath a mobo and serve to hold it). Right after that, I employed standard screws to attach this cooler firmly to them. 2. I would favor just 1 fan (maybe larger a single, but this size is also Okay), but with a regular three-pin fan connector. 3. By bending those edges down, a single could make it narrower, and even firmer. Manufacturer Response:.Dear CustomerWe are sorry to hear you are not fully happy with the memory cooler. We are ware of these concerns and will make the suitable revisions in future models. This memory cooler is excellent for overclocking or operating full slots. It can drastically lessen temperatures by pushing the air out of the region. Especially with all slots filled, it can become a heatsink, so the air must be moved to preserve a cool area. If you have any additional inquiries or difficulties, please really feel totally free to make contact with us straight.Thank youGSKILL AssistanceHigh quality and customer service are our top priorities.Tech Help E mail: ustech@gskillusa.comRMA Dept E-mail: rma@gskillusa.comG.Skill Forum: http://www.gskill.us/forum/

Comment:
Incredibly light weight, some get in touch with it flimsy, I think it's best. It's strong sufficient to hold the fans in location... What else do you want it to do. Keeps my G-Talent PI running cool at six.eight.6.20 at 1825MHz The four pin molex connector. They seriously shoulld have employed a 3pin to 4pin adapter. That way those with a motherboard header offered could use one particular. @G-Talent, If your going to continue to make it 4pin only. Make the cable much longer so we can get the connector tucked away behind the motherboard tray.

Comment:
Cool, straightforward set up. Adds a nice blue spectrum to my rig and keeps my gskill 2000 ram cool. The clearance was perfect and fit snug. I dont know why people today complain about molex. I wish they came with my memory I bought from newegg. Now it does :(

Comment:
Straightforward to install. Cools memory adequately. Plenty of room for memory with huge heatsinks. Super vivid LEDs. As well loud @ 12v. Mounting is kinda weak. There are 3 LED's per fan mounted off the middle motor housing suspended beneath the blades. Most LED fans residence the LEDs in the outer shell with the light shooting into the fins. The fans are about as loud as your common 120mm fan when undervolted to 7v. They wont spin up @ 5volts. Undervolting does not dim the LED's significantly/at all. I wouldn't trust the mounting to hold if you frequent LAN parties or move your Pc often. Manufacturer Response:.Dear BuyerWe are sorry to hear you are not totally satisfied with the memory cooler. Sadly LEDs are naturally really vibrant, so men and women typically like them, or not at all. With regards to fan noise, they are not nearly as loud as a 120mm. There are two fans, so they aren't silent, but thinking about the quantity of air flow they develop, they are not loud. For a semi-portable Computer, this memory fan would not be recommended. If you have any further questions or concerns, please feel free to get in touch with us directly.Thank youGSKILL HelpGood quality and customer service are our top priorities.Tech Help E-mail: ustech@gskillusa.comRMA Dept E mail: rma@gskillusa.comG.Ability Forum: http://www.gskill.us/forum/

Comment:
Quiet, Fits properly, moves a decent amount of air, bright lets None truly with the cooler itself Only challenge with it is my artic cpu cooler is way to massive and this cooler only sits on about 1ǘ way but its nonetheless stable and I have zero matters. Its not there fault by any indicates and it is a great cooler def worth the price. Manufacturer Response:.Dear ClientThank you for your G.Ability buy and overview. Glad to hear the memory cooler fits nicely and is working properly in your process. This dual fan setup is quite strong so it can certainly move air. For overclocking or populating all memory slots, this memory fan can be incredibly useful. As an alternative of generating an area of high heat, the memory fan will allow the hot air to flow out and greatly reduce the temperature of this region. It is generally best to preserve hardware as cool as possible.Thank youGSKILL SupportQuality and customer service are our major priorities.Tech Assistance E mail: ustech@gskillusa.comRMA Dept E-mail: rma@gskillusa.comG.Skill Forum: http://www.gskill.us/forum/

Comment:
Keeps Memory cool beneath overclocks, Blue LED lights.. Molex is not my preferred connection, would rather have had a motherboard energy connection....

Comment:
Very Quiet,2 nice blue led fans.make my ram stable with OCvalue is fantastic as well not cold as a/c

Comment:
Cools my 12 GBs if Gskill MemoryFits on my MSI Large Bang Motherboard firm and stable.Great Blue Leds matches with my other blue LEDs on my Thermaltake Armor + case. None

Comment:
Lots of AreaMolex ConnectorBlue fans None I may possibly be the only reviewer who likes the reality that this item utilizes a molex connector. Thats because my MB has an aux 12v connector suitable subsequent to the NB... functions out fantastic!Unit fits firmly on my ram tabs and I dont have the "play" that others have reported. Good job G.Ability!

Comment:
Still a good buy,, Extra air flow is must...

Comment:
Works well. Not as loud as other critiques had me to believe. Although the securing system isn't the most secure I can consider, it's easy to install and does operate properly, even with a vertical mother board and the fans hanging off of it.Dropped my ram temps ten*c as measured from a point-n-shoot thermometer None that I can consider of. If you're going for a totally silent machine then they do make a small noise, but if you have a wind tunnel gaming rig, you won't notice them.May well not fit well with significant aftermarket CPU coolers on a crampt motherboard. I was using an arctic cool 64 CPU cooler/heatsink which is massive. the ram sat appropriate next to and a tiny under the heat sink. This is all on a msi 790xt-g45 motherboard which is narrow for an ATX anyway. I had to switch back to the the stock heatsink and fan for the CPU to fit this cooler. It's not a huge deal as the stock cpu cooler isn't negative, It just would have been good to run the arctic 64 and these fans. Blue LED's are bright. I like it, other people may not. All of my other lights in the situation are blue, so it fits. Molex adapter for power gripes some. I don't have enough fan pins on the MoBo, so molex is the only way to hook up any extra fans. Not an issue for me.

Comment:
CostHigh quality None so far So great I purchased 2 pair for 8gb total

Comment:
good leds and quiet not stable, tends to fall off the memory at times and is poorly created. It keeps the memory cool, but i just purchased the corsair dominator memory cooler to replace this. Manufacturer Response:.Dear ConsumerThank you for your G.Skill acquire and review. We are sorry to hear you had a mounting dilemma. Sadly with some motherboards, this memory cooler can be slightly unstable. We will take note of this and make the appropriate revision in future models.Thank youGSKILL SupportGood quality and buyer service are our top priorities.Tech Support E mail: ustech@gskillusa.comRMA Dept E-mail: rma@gskillusa.comG.Skill Forum: http://www.gskill.us/forum/

Comment:
Great little memory cooler, this doesnt ship with the 3-pin connector, only molex. This wasn't much of a negative for meh. G.Skill is my fav memory company now :P

Comment:
This is a ideal design for a memory cooler. It's quiet, easily adjustable, has wonderful air flow, and no vibration. It keeps 4 incredibly hot operating Rambus memory sticks cool to the touch. None. In the unlikely event that both fans ought to fail, the fan assembly is tiny enough and mounted far adequate away from the memoy sticks to still enable adequate cooling. A excellent item.

Comment:
Simple to attach and blows an alright quantity of air. Looks good in the case. Had blue led fans which were not stated in the specs. Makes my all red have some blue, purplish close to the ram area now. Fantastic appear and alright air flow. My rams are already cold adequate but i had to match gskill ram with a gskill ram cooler. =P Manufacturer Response:.Dear ConsumerThank you for your G.Skill purchase and assessment. We are sorry to hear you do not like the blue LED lights. In the future, we will take into account producing a cooler with out them or with distinct colors. The Turbulence II is our newest memory cooling fan. With two fans at 3,500RPM, it will move a lot air adequate to decrease your memory temperatures. So regardless of whether you are overclocking or running complete slots, this cooler can prolong the lifespan of your hardware. Need to you have any concerns or concerns in the future, please don't hesitate to make contact with us directly. Thank youGSKILL SupportHigh quality and client service are our top priorities.Tech Support E mail: ustech@gskillusa.comRMA Dept E-mail: rma@gskillusa.comG.Skill Forum: http://www.gskill.us/forum/