Gigabyte EP43-UD3L ATX LGA775 P43 FSB 1600 OC 1PCI-E 2PCI DDR2 SATA2 HD Sound GBLAN Motherboard

Cons:None at this time

Pros:Great board for standard build.

Cons: None... yet....

Pros: Very easy to install, the HD sound is pretty epic with my Logitec 5.1 Surround Sound set up. Automatically installed drivers for all of my old parts from my last mobo. Well worth the price.

Cons: None

Pros: Great motherboard.

Cons: overclocking features are not documented at all in the manual. I had to do a lot of research before getting past 3.5ghz. At first i was worried because the board kept on booting and resetting, but that's because of the lack of research on my part. However if the manual did come with specifics on all the features, i would have saved a good 3 days.

Pros: This motherboard enabled my e5200 to overclock stable at 4.0 ghz on air! i am very impressed with this board. I am writting this review after 6 months of ownership, and so far no problems. For a board that is under $100, you can't go wrong with this. Dual bios is an overclocker's dream, you won't have to clear the darn cmos everytime u set the cpu fsb and multi wrong, the board will reset itself if it fails.

Cons: Honestly, none.

Pros: - SOLID, Stable, Reliable- good overclocking/tweaking functionality.- great bang for the buck- Bought one 7 months ago. Worked so well, when the opportunity/excuse came up, I got another. The second was just as easy to get set up and running.- Both systems 100% stable, 50%, and 33% CPU overclocks, and system tweaks.

Cons:no SLI or Xfire, other than that.... tis great

Pros:SPIDF, 6 USB, 6 channel audio, lots of sATA conctors

Cons: no crossx/sli . more sata would be good personal prefernce picky for a budget board

Pros: price . rear usb good. justa basic little board gets the job done. replaced a posdfi dkx48 board

Cons: 4 eggs because in order to use the IDE connector (for my legacy CDROM drive), I had to set the all Sata ports on the board to IDE mode. :-( Further, the IDE drive takes up SATA slots on the board, so you don't really get 8 disk slots as I expected (2 IDE and 6 Sata), and only SATA ports 0,1,4,5 are IDE masters... If you plug SATA drives into port 2 or 3, they become slaves, and port 1 becomes /dev/sdc (linux). This I had to figure out by trial and error. It's not clearly documented!

Pros: Looks like a very well made board.

Cons: U get what u pay for. Not the easiest to OC like p5k board. doesn't like budget memory. had problems with lan controller but has pci for backup lan card.

Pros: Cheap, solid, booted right up. Stable with cheap parts and 400 watt pwr supply @ stock settings. no problems resetting bios after many OC attemps. Great for budget builds. Runs Win 7 with no need for Gigabytes drivers.

Cons: NONE. This board works and I have had no issues.

Pros: Straight forward instructions. Fired up right away and nave had NO problems. I do not understand the negative reviews. I suspect people are not knowing how to build a computer and blame it on the board.This is a good working board. I will buy again.NewEgg service was top notch!!

Cons: Unable to get my Intel E6320 to overclock on this board. Had no problem OC on my asus mb. When tried to overclock the smallest bit the board wouldn't even boot.

Pros: None really, it works if you don't want to OC.

Cons: Mine didn't come with any standoffs or screws, I don't know if this happened to anyone else. Luckily, my local store gave me some free, so it all worked out in the end.

Pros: Good Specs for the priceWorks wellGood mobo

Cons:no raid

Pros:informative biosstablecheap

Cons: Some issues with the onboard ethernet connection being dropped.

Pros: Fairly inexpensive, worked out of the box6 sata ports

Cons: None so far but I will let Newegg know if something should arise.

Pros: I have to say this motherboard makes me very happy.I got this motherboard to replace a motherboard from SuperMicro (which I suggest do not purchase because the thing died on me 6 months after use). It works well with xp 64 and just recently upgraded to windows 7 64 Ultimate and works well with that too. I have Intel Core 2 Quad 2.83 GHz CPU, 8 Gigs of ram, a Nvida 9800 GTX+, 2 Samsung 1 TB hard drives and it scores 7.3 almost across the board for performance with Aero on except Disk data transfer rate is 5.9 from primary hard disk so this Motherboard does its job.

Cons: Will not poweroff when OS is shutdown. OS successfully shutsdown but power fan, cpu fan, system fans and graphic card fan continue to spin. Tired every bios setting and confirmed shutdown option in OS is correct. Flashed to most current bios as well. Board says rev 1.1 but no only downloadable bios is for rev 1.0

Pros: Inexpensive board with good set of features

Cons: None at all.

Pros: Great brand name. Nice overclocking features. All the needed features. Overall a great board.

Cons: None from my point of view but I bought it for typical home use, I am not an overclocker or a gammer but it appears to me to have many overclocking features.

Pros: Great board, quality connectors, sturdy construction, installed and ran on first attempt. I run it with Windows 7, 64 bit and an E8200 processor with 4gigs of memory. It runs cool and I have had no lock ups.

Cons: Little I can think of, an ESATA plug would have been good. If you miss that, just buy a cheap SATA to ESATA bracket (Item#:N82E16812226006)

Pros: Worked flawlessly, very good feature set for the price, lots of USB plugs (8 on the rear+4 on internal headers), very good OC capability with adjustable voltages & timings (I used a rescued E8400@3.8 with very little tweaking), Windows 7 install was a charm, the board and all it's controllers were recognized immediately, Win 7 loaded all the drivers, I did not even open the included drivers CD. Ubuntu seemed to also work well (starting from the live CD, I did not install it). There is even an onboard COM port for the odd device that requires it.

Cons: Quality control is horrible. This board was jittery from the start and would not post after 3-weeks. The RMA process is slow but Newegg was good enough to just give me a credit. But still, had to order a board and then replace the board... which is a lot of work. It also messed up my SATA drive but it was a simple repair.

Pros: Neat simple board both physically (Micro-Atx) and with regards to features. If you need 2 LANs, 2-PCIE, and RAID then this is the wrong board. It has only 1 of the essential LAN and PCIE16-2, but they are top in performance. I liked the Legacy stuff even though I am not using it (COM, LPT and IDE). I occasionally use RS232 but have grown use to doing this with an adapter that I tend to misplace, so I know I have a regular port in a jam.