Sunbeam RHK-EX-BA Rheobus-Extreme Fan Controller Panel - Retail

Cons: Only 1 con: the blue LED's are crazy bright when turned up to full. They easily light up a dark room, and are painful if you stare directly at them. Sunbeam should have use low intensity LED's. For the hardcore DIY modder out there: It may be possible to mod this unit to make the LED's less bright, as there appears to be space to solder in additional resistors, but that job would be a royal PITA given the tiny space you have to work in between the knobs and the capacitors.

Pros: 30 watts per channel. Very robust rheobus, can handle 2 fans per channel, although to be safe I only used 1 per channel.

Cons: None

Pros: Easy to install, LED's are not too bright and no too dim, there just right. You can hookup multiple fans to one channel with the high wattage. Still have it, using it, and love it.

Cons: none

Pros: Awesome. I have 6 fans and a cold cathode attached to this. It works fabulously.

Cons: None so far. I've been very pleased with this unit.

Pros: This unit performs well, is manufactured well, and looks awesome in your system. If your in the market for a quality fan control unit, then look no further.

Cons: could have came with more fan extension cables

Pros: works

Cons: one of the LEDs flickers a little bit. The range of the knobs far outmatches the range of operational voltages for the fan

Pros: This thing is awesome! more than enough power for my 3 120mm, zalman 9700, 100mm fans, and any more i want to add in the future! The LEDs arent too bright, but i just keep the fans a little lower unless im gaming, so theyre not too bad. they do get bright as heck when theyre on max. but i just close my front case door. seems like good construction, and fits flush in my antec p180b

Cons: LEDs are a bit ugly. I know, if you are buying this you should know what you are getting into but the blue light does not match the blue LED color of most case fans. I personally stuck mine behind my case front panel (which opens pretty easily) since I don't touch my settings ever.

Pros: It works like I expect it to. Nothing to complain about here.

Cons: The heatsinks are pretty high so if you have a tooless case and have to let it sit there and they touch a metal part of your case in an angle then you're scr**ed until you actually find out whats going on, I almost thought it was DOA because of my computer failing to start.

Pros: This is an above average fan controller. it controlls fans up to 30 watts!! thats like 3 and something amps. you could probably use this for a server fan controller. works nicely with delta 190cfm 120mm fan but See other thoughts.

Cons: none

Pros: Control 6 fans easily, Tons of watts for multiple fans per channel, Blue led knobs, fits in the door of an antec p183,

Cons: -For some reason, fans spun backwards the first few times i used it, if they spun at all. this problem has since fixed itself, I'm not sure how.-LEDs are very bright. not a con to me, but could be to some

Pros: -Simple, clean, understated-30w per channel!-Like the blue LEDs-Six channels-A breeze to set up-Comes with bunches of cable adapters

Cons: with 3 fans i really didnt need it, i should have spend the 40$ on a better hard drive or ram

Pros: works

Cons: Worried about heat output but the huge heat sinks should be enough to keep this baby cool. I replaced the blue LEDs with nice RED color LEDs.

Pros: Runs six high power fans for a total of 474 CFM of airflow in my "Rooster" build. LEDs are easy to replace by cutting original LEDs off at the head and cutting then shoving new LEDs into the plastic holders. Just solder the loose ends and you're done. Make sure your polarity is right to the LEDs (had to redo my work cause I wired them backwards). This fan controller does what it's suppose to do.

Cons: - The knobs feel a bit cheap- It only comes with two 3-pin to 3-pin fan cables. It also comes with two 3-pin to 4-pin Molex cables and two "RPM signal wires for M/B" that have the yellow sensor wire whip to plug into your motherboard so your it can tell how fast your fans are running. These two cables are made for 4-pin CPU fans, but will work just fine with 3-pin fans. I have 5 3-pin fans, so for two of them I had to use the 3-to-4 pin cable with the 4-to-3 pin adapters that came with my case. For the 5th fan, I used the cable with the sensor wire whip but I yanked out the sensor wire and cut off the whip.

Pros: I got this controller thinking I was going to need to drill new tap holes closer to the front of the unit so that the knobs would fit under the door on my CoolerMaster Cosmos 1000 case, but the front-most holes did the trick just fine. The controller itself works as advertised, and though the lights are as bright as everyone says they are, my case door covers them nicely.

Cons: dont think so

Pros: 6+fanscool black surface with blue led knobslots of adapters (helped me out with my stock antec 900 molex fans)

Cons: The only thing brighter than the knobs on this thing in my room is my monitor.

Pros: Great fan controller. Easy install into and is generally a must for someone wishing to undervolt those noisy fans. Whopping 30w per channel!

Cons: The knobs feel like they could be pulled off very easily. I noticed a small capacitor on the front that looked like it could snap/pop/explode off at any moment and it probably will if provoked. The LEDs, even when set at medium speed, are very bright and could get extremely annoying if the case is facing directly towards your face.

Pros: Gives full control over fans: knobs full left turns fans off while knobs full right turns fans to max. Impressive black finish and blue LED glow made my case look even better. Includes two 4-pin to 3-pin adapter, two 3-pin to 3-pin extension and two dual 3-pin to 3-pin cables that will accommodate numerous fan designs.

Cons: none

Pros: It works and looks goodit looks better than u thought it wouldthe fron face looks like a clear glass front (plastic)and gives it depththis looks better than just a metal front...and it lights up!

Cons: I was expecting a full aluminum outside and not aluminum covered with plastic (not an issue, just an expectation). Also, my largest complaint is there is no way to turn OFF the LED indicators, they are VERY bright. I'm either going to cover the LEDs on the inside or return it. It lights up a whole room at night.

Pros: The fans speed up, they slow down or turn off. It does exactly what it is supposed to. The build quality is good, no real flaws with it.

Cons: None.

Pros: This is an awesome fan controller. Simple. Its the first fan controller I have ever gotten. All my fans work, provides plenty of cables, and the LED's are BRILLIANT. I highly recommend that you purchase this fan controller.

Cons: Only controls the fans through about 1/2 of the turning spectrum for me. Anything below one half just shuts off my fans.

Pros: Easy InstallVariable Brightness LEDS30-watt support6-channels