General Information |
Manufacturer: | Cisco Systems, Inc
|
Manufacturer Part Number: | AIM-ATM=
|
Manufacturer Website Address: | www.cisco.com
|
Brand Name: | Cisco
|
Product Name: | High Performance ATM Advanced Integration Module
|
Product Type: | Advanced Integration Module
|
Interfaces/Ports |
Interfaces/Ports: | Not Applicable
|
Interfaces/Ports Details: | Not Applicable
|
Management & Protocols |
Protocols: | ATM, RSVP, MpoA, PPPoA, NHRP, VoIP, VoATM
|
Environmental Conditions |
Temperature: | 32°F (0°C) to 104°F (40°C) Operating, -4°F (-20°C) to 149°F (65°C) Non-operating
|
Humidity: | 10% to 85% Non-condensing Relative Humidity Operating, 10% to 85% Non-condensing Relative Humidity Non-operating
|
Miscellaneous |
Additional Information: | ATM Edge Connectivity It requires VWIC-1MFT-T1, VWIC-1MFT-E1, VWIC-2MFT-T1, or VWIC-2MFT-E1 Voice/Wan Inetrface Card All voice interface cards are supported: FXS, FXO, Analog-DID, E&M, and BRI The AIM-ATM supports the following ATM services: Supports up to four ATM T1/E1 ports per AIM, using two 2-port multiflex T1/E1 VWICs in WIC slots, NM-xFE2W, NM-2W, or NM-HDV ATM class of service (CoS) features CBR, VBR-nrt, VBR-rt, ABR, and UBR AAL5: H.323 VoIP, up to four T1/E1 channels of AAL5 (with IMA support) VoATM-AAL2 (trunked only) If used in conjunction with a T1/E1 multiflex trunk voice/WAN interface card (VWIC-MFT) for circuit-mode data and frame-mode data over ATM infrastructures Supports QoS features Permanent virtual circuit (PVC) and switched virtual circuits (SVC) support, where SVC is for data only ATM Forum UNI 3.0, UNI 3.1, and UNI 4.0 LAN Emulation 2.0 Client and Server Per VC queuing for segmentation Support for up to 1024 AAL5 VCs for data/voice features Support for up to1024 AAL2 VCs with up to 255 subchannels each for voice per AIM 1-Kbps resolution for sustained cell rate (SCR) and peak cell rate (PCR) 32-Kbps minimum traffic rate 13-bit range for VPI/VCI per interface Maximum Burst Size (MBS) is up to 255 cells per VC Dynamic management of the cell scheduler table Operations and management (OAM) support (F5) Early Packet Discard AAL5 reassembly time-outs AAL2 subcell multiplexing support
|
System Requirements: | AIM slot Required Cisco IOS Image: Any Cisco IOS Plus or SP Services Feature Sets Supported Platforms & Minimum IOS Versions: Cisco 2851 - 12.3(8)T4 Cisco 2821 - 12.3(8)T4 Cisco 2811 - 12.3(8)T4 3845 - 12.3(11)T 3825 - 12.3(11)T 3745 - 12.2(11)YT or 12.2(13)T 3725 - 12.2(11)YT or 12.2(13)T 3660 series - 12.2.4T 2691 - 12.2(11)YT or 12.2(13)T 2650 - 12.2.4T 2600XM Series - 12.2(8)T1 2600 series - 12.2.4T
|
Compatibility: | Supported Platforms: Cisco 2851 Cisco 2821 Cisco 2811 3845 3825 3745 3725 3660 series 2691 2650 2600XM Series 2600 series
|
Certifications & Standards: | H.323 RFC 1483 support for multiple encapsulations over ATM RFC 1577 support for routing over ATM ATM standards: AAL2 AAL5 UNI 3.0 UNI 3.1 UNI 4.0
|
Warranty |
Standard Warranty: | 90 Day Limited
|