Product ReviewsStarTech 8" 8in ATX12V 4 Pin P4 CPU Power Extension Cable
|
50%
45%
5%
0%
0%
|
With 22 User Reviews
|
 Rating: Review Date: 05/16/11  |
Cons:
none
Pros: Perfect for tall case blues, price |
|
Rating: Review Date: 05/11/11 |
Cons:
- 4 pin is kind of dead (for higher end)
Pros: - Very cheap- Cheaper on PM Comment:
I got this cable because of the cheap price, but the more I think about it, I will probably never ever have another mobo that needs a 4 pin power cable. In the meantime its not taking up much space in my wire desk... I will update this if I ever use it. |
|
Rating: Review Date: 02/01/11 |
Cons:
Non so far!
Pros: Price, Length, Does what it's supposed to, Connections Comment:
Just bought this just in case cause I needed one on the last build. Turns out out I didn't need it cause my Lian case had better cable management. For the price can't complain. Last time I ended up buyng one locally for $12Well if I need it in the future I have one and the lenght is about right when I need it. Power supplies cable length to MB should be improved than this wouldn't be needed if you have full size case. Just my thoughts! would buy again if needed. |
|
Rating: Review Date: 01/22/11 |
Cons:
Not sleeved
Pros: Easy to install, great for short cables or bottom mounted PSU Comment:
Perfect for oddly placed P4 connector on my motherboard in an antecedent 300 case with a power supply that has a short P4 cable. Easy to install as cables are keyed to be I stalled only one way. Length is perfect. Would be better if it was sleeved to match my power supply. Fr the price, you can't expect it to be sleeved. |
|
Rating: Review Date: 01/09/11 |
Cons:
not sleeved, not black ends, could be a hair longer.
Pros: long enough to reach up the back of my mobo tray in my haf 932, works great. Comment:
bought it to complete a build i was working on and it works great although asthetically its not the most pleasing thing, they are more expensive units that do the same job but for the 3 or 4 bucks i paid i don't really mind. easily connected to my 4 pin atx connector and has never game any problems. |
|
Rating: Review Date: 10/26/10 |
Cons:
None
Pros: Does exactly what it's supposed to. Comment:
This is the perfect extension if all you really need is just a little bit of length. Great for those times when your case is designed for your power supply on the bottom, mobo is designed for it on the top, and the power supply has a short cable. |
|
Rating: Review Date: 10/11/10 |
Cons:
Utilise du fils 20AWG donc très limité pour le transport de courant...
Pros: Mesure 9.5 pouces incluant les connecteurs.Semble bien conçu. Comment:
Ce câble d'extension est bien construit mais utilise que du fils de calibre 20AWG. Ceci limite la possibilité de transporter du courant sans surchauffe des fils. Donc pas à considérer pour overclocker des CPU haute gamme. |
|
Rating: Review Date: 09/09/10 |
Cons:
none
Pros: -works properly-good length Comment:
I bought this for better cable management and this extension provided the additional length i needed. Would recommend to anyone looking for a cpu extension cable. |
|
Rating: Review Date: 01/13/10 |
Cons: - No mesh sleeve on the wiring.
Pros: - Does exactly as advertised as a 4-pin extension. Comment:
If you are using a bottom mounted power supply case and have a short 4-pin CPU power cable lead then you'll need to buy this or a similar product like this. I had to get this for a friend's build. I would have like to see a mesh sleeve on the wiring area to protect it from it being accidently pinched. |
|
Rating: Review Date: 12/16/09 |
Cons: None
Pros: Provided a very good extension Comment:
Unfortunately the old 4pin cable in my PSU did not go far enough, but this extension gave it just the extra centimeters it needed, works great, wonder if I can find an 8pin version of this around? |
|
Rating: Review Date: 04/18/09 |
Cons: Cable not sleeved
Pros: Does what it's meant to do Comment:
If your CPU power cable cannot reach where it needs to go, then you need this! I had to get this after realising that I could not route the cable behind the motherboard tray in my Antec 1200. It would have been nice if the cable was sleeved though. |
|
Rating: Review Date: 04/15/09 |
Cons: - Not sleeved
Pros: - Works properly- Good length Comment:
I had trouble hooking up the CPU power cable. The power supply in my CM 690 case was bottom-mounted, so the cable had to be stretched to barely reach the connector. I figured this extension would make life a bit easier, and it certainly did. This cable seems to be totally identical to the more expensive nGear one. This review was modfied by poster @ 04-15-09 02:54 AM |
|
Rating: Review Date: 03/03/09 |
Cons: not as cheap if not PM'd
Pros: Invaluable for some cases, cheap if PM'd Comment:
What can be said.. it works and works nicely. For some cases (Antec 300 etc) with a PS lacking cable length these come in very handy.. and a problem is easily avoided. :) |
|
Rating: Review Date: 02/25/09 |
Cons: None so far
Pros: PriceLenght Comment:
For those with a psu on the bottom of the case this is a good investment.Thank god for ncix as i couldn't find one of these at any of my local stores. |
|
Rating: Review Date: 02/23/09 |
Cons: It's a cable.. either it works or it doesn't
Pros: PricePricePrice Comment:
What can I say about this..? It's a power cable.. Either it works or it doesn't and this one works. So A+ from me. 8 inches is just about perfect these cable lengths.. Before installing any power cable that locks into place you really want to work it in by connecting it to itself a few times.. Some cables are made so damn tight that you nearly have to break your mobo to unplug them.. |
|
Rating: Review Date: 09/03/08 |
Cons: Design maybe?
Pros: Does the job & cheap Comment:
This little cable necessary for anyone buying a case with bottom mounted PSU. I ve changed my case last month for an Antec Three Hundred and I was glad to have that.I wasn't sure that my CPU ATX12V 4 Pin from my PSU was long enough for it and finally it was not. |
|
Rating: Review Date: 08/18/08 |
Cons: none
Pros: good finish Comment:
I needed this to modify a MicroPSU fanless power supply for an Intel Mini-ITX box. It works as advertised. |
|
Rating: Review Date: 05/26/08 |
Cons: none
Pros: Perfect length, does what it is supposed to do very well. Comment:
Just a simple cable that does what it says. Have one for my Cooler master CM 690 case which has a bottom mounted PSU. Overall Good quality cable. |
|
Rating: Review Date: 02/15/08 |
Cons: Nonw
Pros: Did exactly what I needed it to. Cheap as dirt. Comment:
I needed this cable because I bought a P182 case and my power supply's 12V cable wasn't big enough to reach. Works great. |
|
Rating: Review Date: 10/11/07 |
Cons: nop
Pros: Simple, well made, cheap price....at least here Comment:
I bought it to be use in an ANTEC P182 and at the end the leads form my PSU Silverstone Decathlon where long enough, i did not had to use it but i could easily see thats it's well made, now now i have two of them as decoration !!If you need it at this price go for it This review was modfied by poster @ 10-11-07 01:56 PM |
|
Rating: Review Date: 06/04/07 |
Cons: none
Pros: good for extending the cable Comment:
i had bought this for a friend who was looking to upgrade his pc he bought a antec 900 and i was worried about cable lengh but there was no need for the cable after all still good to have. |
|
Rating: Review Date: 04/17/07 |
Cons: none
Pros: Dead cheapSaves my life when I have a Big, non standard case Comment:
This little thing just saved my life, so Thanks for that I'll sure buy again in the case I buy another Antec P180 or Antec Nine Hundred :) |
Made my life a lot easier during a build with bottom mounted power supply.