Location: Home > Computers > Accessories > Other Accessories > BYTECC Bracket-35225 2.5 Inch HDD/SSD Mounting Kit For 3.5" Drive Bay or Enclosure

BYTECC Bracket-35225 2.5 Inch HDD/SSD Mounting Kit For 3.5" Drive Bay or Enclosure

  Store Product Price  

Online
BYTECC Bracket-35225 2.5 Inch HDD/SSD Mounting Kit For 3.5" Drive Bay or Enclosure
Newegg.ca - Once you know, you Newegg! 
$3.99 CAD Buy Now

What is on Ebay

  End Time Product Price  
BYTECC Bracket-35225 2.5" HDD/SSD Mounting Kit For 3.5" Drive Bay or Enclosure BYTECC Bracket-35225 2.5" HDD/SSD Mounting Kit For 3.5" Drive Bay or Enclosure $4.99 CAD Shop Now
Bracket-35225 2.5 In HDD/SSD Mounting Kit For 3.5in Bay/Enclosure Bracket-35225 2.5 In HDD/SSD Mounting Kit For 3.5in Bay/Enclosure $7.62 CAD Shop Now
Bracket (35225) 2.5in HDD/SSD Mounting Kit For 3.5in Bay/Enclosure Bracket (35225) 2.5in HDD/SSD Mounting Kit For 3.5in Bay/Enclosure $12.45 CAD Shop Now
Bytecc Bracket-35225 Tower Conversion Kit Bytecc Bracket-35225 Tower Conversion Kit $19.50 CAD Shop Now
Bytecc Bracket-35225 2.5" HDD/SSD Mounting Kit For 3.5" Drive Bay or Enclosure Bytecc Bracket-35225 2.5" HDD/SSD Mounting Kit For 3.5" Drive Bay or Enclosure $77.54 CAD Shop Now

Product Reviews

BYTECC Bracket-35225 2.5 Inch HDD/SSD Mounting Kit For 3.5" Drive Bay or Enclosure
54%
Excellent
24%
Very Good
11%
Average
4%
Below Average
8%
Poor
Rating: 8.24/10
Minjonet
Rating:

Review Date: 09/14/13
Comment:
Holds two two.five" SSDs and comes with screws. Basic, clean, uncomplicated to install. Operates like it should. To me personally it's not a con, but it is note worthy to say that it is plastic. It will do the job for me just fine. It's not like I'm going to be moving my laptop about substantially at all. CoolerMaster HAF 922's toolless style tends to make it really simple to set up this issue. I enjoy that case.
Vian
Rating:

Review Date: 09/08/13
Comment:
Great for my tool-significantly less chassis. (Worked fantastic with my OCZ Vertex 30GB SSD. None
Kasi
Rating:

Review Date: 09/07/13
Comment:
Does what it supposed to do. I'm not delighted that its make of plastic -Motherboard: MSI Major Bang-XPower LGA 1366 Intel X58 SATA 6Gb/s USB 3. ATX Intel Motherboard-Memory: OCZ Reaper Edition 12GB Ɠ x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Low Voltage Desktop Memory Model OCZ3RPR1333C9LV12GK x 2-Processor: Intel Core i7-980X Extreme Edition Gulftown 3.33GHz six x 256KB L2 Cache 12MB L3 Cache LGA 1366 130W Six-Core Desktop Processor BX80613I7980X-Video Card: EVGA 015-P3-1580-AR GeForce GTX 580 (Fermi) 1536MB 384-bit GDDR5 PCI Express 2. x16 HDCP Ready SLI Help Video Card-Sound Card: on board-Hybrid Drive: Seagate Momentus XT ST95005620AS 500GB 7200 RPM 2.five" SATA 3.0Gb/s with NCQ Strong State Hybrid Drive -Bare Drive x two-Tough Drive: Seagate Barracuda XT ST32000641AS 2TB 7200 RPM 64MB Cache SATA six.0Gb/s 3.five" Internal Hard Drive -Bare Drive x two-HD-DVD/Blue-ray Drive: LG Black 6X BD-ROM 16X DVD-R
Gilda
Rating:

Review Date: 08/13/13
Comment:
Does precisely what it desires to do.No frills required. No require for it to be metal, plastic performs fine. None but.
Kyrie
Rating:

Review Date: 08/06/13
Comment:
None Initial time I've totally wasted cash on newegg. Doesn't fit into my case in any approach with screws from my case or screws integrated. On second believed, the most significant pro was the satisfaction of snapping it in half when I realized it was useless.
Evaline
Rating:

Review Date: 08/05/13
Comment:
Supplies a strong mount in a hassle-free place with good cooling. none, except its not totally free.
Roberta
Rating:

Review Date: 08/02/13
Comment:
Does what it is supposed to do. Plastic but you know that going in. If you have a CoolerMaster Cosmos case the mounting holes will not line up with the HD trays. I was in a position to drill out 4 holes on the bottom and mount it inside the tray quite simply and really securely. For on the cheap, it does the job. The plastic can be a bit of a letdown but if you can't uncover a kit that you know ahead works with your case, it tends to make it easy to perform in.
Eagan
Rating:

Review Date: 07/30/13
Comment:
Fits two! Screws dont screw into case, but it fits tight so it doesnt move.
Georgianna
Rating:

Review Date: 07/27/13
Comment:
Low-cost.Holds two two.five inch SATA drives with no difficulty. I knew it was plastic, but it was even flimsier than what I expected. As extended as you deal with it cautiously it ought to be fine.I wonder how it will hold up in the lengthy run thinking about the supplies employed. This isnt a laptop that is going to be moved around a lot, so I'm not terribly worried about it. If it breaks I will get a metal bracket next time. You're getting what you pay for with this piece, as extended as your expectations aren't high you'll be satisfied with it. Just preserve in mind that the thing is type of delicate.
Nike
Rating:

Review Date: 07/25/13
Comment:
Serves its purpose as mounting 2.5 in three.five bay. Truly, it'll match two two.five in a 3.five which is even much better. Low cost feeling, really tight match for each the drive and fitting it all into the bay. Turns out I truly didn't want it. I was constructing a HTPC and was going to use a 2.5" drive from a dead laptop as the boot drive. When I got the new case, it had a location particularly for a two.5" drive on the bottom which I didn't know about. But anything like this is good to have on hand.
Ahmad
Rating:

Review Date: 07/23/13
Comment:
* Properly produced* Can fit 2 drives (none) * Intel 80GB SSD in Antec P182 caseNo difficulties with installation
Shania
Rating:

Review Date: 07/23/13
Comment:
Fits perfectly in a Cooler Master 932 HAF case. Just assemble SDD to the bracket with the included screws, slide it into the drive bay and lock in place with the drivebay locking arm. You can assemble ƒ) SSD drives in the similar bracket and use only a single drive bay! None Finish of drive face, where the SATA connection is, sets back approx. 3ǚ" from the typical SATA challenging drives, which are assembled in my case. (This is not genuinely a con).
Howard
Rating:

Review Date: 07/13/13
Comment:
Awesome bracket. I can now mount my two old two.five difficult drives in my desktop. wiring can be difficult mainly because they are quite close proximity straight cables operate greatest. no vibration and appears fairly sturdy for becoming plastic. Ended up stripping one particular of the holes for the mounting screws. just utilized a slightly larger screw on that hole
Wilmer
Rating:

Review Date: 07/04/13
Comment:
Light Weight. Good Price It's plastic and the mounting screws are self taping. So the far more you use them the a lot more they put on. Overall it gets the job performed.. .If your going to reuse this allot, make sure your cautious not to ware out the screw threads.
Astro
Rating:

Review Date: 07/01/13
Comment:
it's low cost and gets the job performed. made of plastic and doesn't come with washers Gundam Wing?
Howell
Rating:

Review Date: 06/30/13
Comment:
Performs as intended. You can mount two 2.5" drives on it, one particular on best of one more. The bottom drive is fastened with screws from the bottom, and the leading drive is fastened with screws from the sides.Mounted a Crucial C300 SSD devoid of any concerns. Had no trouble finding the bracket to snap into my Cooler Master RC-690 tool-less 3.5" drive tray.Comes with two bags of screws: 8 for the drives Ɣ every single) and 4 for the bracket itself. It's plastic, but appears tough sufficient. Don't be like me and try to use the incorrect sort of screws when mounting a drive in the bracket--the bag with eight screws is the appropriate one.
Zoheret
Rating:

Review Date: 06/30/13
Comment:
Operates as described. Installed two SSD's with this adapter with no issues. Want it was metal. It performs.
Eben
Rating:

Review Date: 06/30/13
Comment:
Puts two 2.5" SSD drives into the space of 1 three.five" drive, just like it's supposed to. None It's a bracket. It holds drives. It won't make your method more rapidly, but it will save you some space.
Evania
Rating:

Review Date: 06/28/13
Comment:
it worked it's plastic
Storm
Rating:

Review Date: 06/28/13
Comment:
Low cost and since it is plastic theres no likelihood for a ground-out. Self tapping screws are garbage! Removed an egg for them. Accidentally tapped my plastic ssd and messed up the hole size. Now no screws match immediately after a one particular time removal. Incredibly loose fitting when the screws wont tighten. This baby is a one shot wonder, make certain you use the tiny pack of four screws to fasten to your case and the huge pack of 8 screws to attach it to your drive. Must use clips as an alternative of screws, quickly clips.
Lavey
Rating:

Review Date: 06/25/13
Comment:
Cost absolutely nothing I purchased this to go in a Cool Master case, it holds 2 Corsair C300 64GB SSD drives. Fits perfect for what I needed
Caroun
Rating:

Review Date: 06/21/13
Comment:
It fits excellent with my intel x25-m drive. It doesn't match great with my antec 300 case, and i've heard that it doesn't match great with any antec case though i can't verify that.
Abdulrahman
Rating:

Review Date: 06/16/13
Comment:
Holds my two OCZ SSD Drives as intended. Not actually a con due to the fact my case has a special mounting approach... Antec P182... but had to drill the bottom holes a tiny bigger to use the long screws that Antec supplies for their drive holder.
Pierrette
Rating:

Review Date: 05/30/13
Comment:
Cheap, does it's job of mounting a 2.five" HDD. Self tapping screw setup is hokey at greatest. The holes aren't actually optimized for the screw size and the screws are crumby, resulting in a fair amount of torque expected for installation. It's not very simple to get the screw threading straight either. Wouldn't risk a common platter HDD in this item.
Marquis
Rating:

Review Date: 05/29/13
Comment:
Low cost. Functions. Holes in the bottom of the bracket are also tiny for use in a sled-sort hard drive mount. I drilled them out to be 1ኜth inch larger, and that worked.Drives cannot be mounted upside-down or sideways. Drives can be mounted "backwards" (with connectors at the opposite end), but the bottom drive cannot accept a energy connection that does not terminate its cable in this configuration. With a tiny far more believed, it could be a a lot more flexible bracket.
Click Here Show More Product Reviews

Product Features

Product Specifications

Model
Brand BYTECC
Model Bracket-35225
Spec
Specifications This Internal Mounting kit convert 3.5" drive bay to 2 x 2.5" drive bays for 2.5" Hard Drives. It works with HDD/SSD and includes screws to mount the drive.
Features
Features Maximize the internal space of your computer case for efficient usage.

2 Packs of screws included for mounting the bracket into the PC case
Manufacturer Warranty
Parts 180 days limited
PriceBat.ca is 100% Canadian Own premier price comparison shopping site. Easy to search & compare prices of computer products, electronics and games at Canada online stores.