VPN: CA-PH410-R1
Product ReviewsNZXT Phantom 410 ATX Steel Computer Case 3X5.25 6X3.5 3XUSB3.0 Audio and Mic Input - Red
|
20%
60%
20%
0%
0%
|
With 5 User Reviews
|
 Rating: Review Date: 01/24/15  |
Cons: Not really a con, just be patient while routing the cables otherwise you might end up pushing off the rubber grommets. Recommend holding/pinching the edge down when routing the cable through it and no problem with slippage
Pros: Good quality workmanship in the case, plenty of case room for components even with dual video cards (tip: remove hard drive cage while installing and routing cables, much more elbow room. Plenty of room for cable management as well with plenty of tie down points to make your build look extremely clean and professional. |
|
Rating: Review Date: 01/06/13 |
Cons: Not a completely tool less build. Would prefer thumb screws instead of convectional screws for Motherboard.Paint will chip easily. Be careful during assembly.Red show fingerprints.Window is a bit small. Can only see a small portion of the interior.
Pros: PriceLooksEase of buildFeels sturdy2 x USB 3.0 and 2 x USB 2.0 on the front panel.Fan controller with all fans pre wired made for easy install. Comment:
The last case I built with was a Lancool. The NZXT was almost as easy to build with, but not totally tool less. Fits an Asus 660 OC card without having the remove the HD cage. Cable management is easy with tons of space on the back side of the Motherboard. |
|
Rating: Review Date: 08/13/12 |
Cons: - paint gets scratched off easily- hard drive mounting system sucks! HDs are hard to fit in on the hd brackets. - the screws that locks the 3.5 hds have to be removed in order for an ssd to fit in on it - When connecting a Sata cable to an SSD on this hd brackets, it requires a straight (not angled) Sata cable only because one of the bracket's bottom support blocks an angled sata cable (i hate how they didn't think about this)
Pros: - looks like a beautiful lady (can't keep my eyes away from it)- if ferrari makes pc chassis, this would be it- Mid size is perfect & it's light weight- Cools all internal hardware well- Top Hard drive cage is removable to fit in a large gpu- mounts 120mm radiator on top- has a large hole for installing the mobo backplate, & and is on the right position for most 1155 socket boards- cheap Comment:
I'll give this case 4stars because althought it is almost perfect in my opinion the hard drive bracket problem was just a big issue to me. But everything else is great. I would recommend this case for anyone who's budget for a case that is around $120. I got this case in white and my buddy a red one. Check out his system which just looks amazing... http://www.facebook.com/HardwareExperience(give us a thumbs up. thanks!) |
|
Rating: Review Date: 03/07/12 |
Cons: Cable management grommits are kinda flimsy, and a tight wqueeze once all the cables are in if using an after-market cooler.
Pros: Nice looking, good fan layout, great colour. Comment:
Good stylish case, with some nice pre-installed fans. I did have some space issues once all the cables were in. and the 8 pin power connector took a little encouragement because it was a tight fit in the upper left corner. |
|
Rating: Review Date: 02/25/12 |
Cons: Paint chips easily.Some might say its too big.
Pros: Big enough for expansion. Lots of places for fans. Comment:
I got mine and the front panel wouldn't close. Paint was chipped off the side and the power and reset button on top wouldn't work. Don't get ground shipping if it has a long travel it just might be busted up like mine. It didn't look as good as I thought it would. Still a decent tower. |
This is my 3rd NZXT Phantom 410 case, Gunmetal and Black were used in prior high end gaming builds as well and I have no complaints.