CORSAIR XMS3 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory

Comment:
Great!, excellent for spending budget and smaller comps. none

Comment:
Nice seeking heat spreaders. I discovered never to obtain ram right here again due to ridiculous restocking costs. -Will not run at 1600 specs at 1.65v with eight-eight-824 timings bios settings. Growing voltage did absolutely nothing (I have a 120mm fan blowing on these issues, too). -Only Runs steady at 1333 speeds or reduce. -Had to pay a restocking fee of ภ.50 for the manufacturer's failure--wow. I attempted a distinct brand with similar specs and no issues. Did I mention the ภ.50 restocking fee? No, I shouldn't have to take duty for a manufacture's failure. I can assume of an additional location that doesn't do this and even delivers a cost-free shipping return label. So next time, Ill be getting ram elsewhere.

Comment:
Seems fantastic. I've place it through memtest for about 24 hours ྫྷ passes) with no issues. My mobo (Gigabyte GA-880GM-UD2H) auto-detected them as DDR3 1333 (-1 egg), but I have manually stepped them up to 1600 and not experienced any issues as a result far. Complete disclosure: I bought these from yet another vendor, but Newegg's evaluations are the very best!

Comment:
Just operates good. No hassles. rapidly. inexpensive. Completely none. Purchase it.

Comment:
Does what is advertised and does it quick. None. RAM does what I need to have it to do no difficulty. Will pick up yet another set of these later down the road.

Comment:
works good, no problems and a brand I trust none so far

Comment:
Bought these sticks back in March 2010 & haven't been disappointed. Run w/o any problem in my Asus M4A785TD-V EVO mobo & AMD Athlon IIx4 630 Propus two.8ghz Quad-core. none so far Initial time developing a machine absolutely and 1st time i've ever applied Corsair sticks. I'm throughly pleased with these & will continue to come back to Newegg & Corsair. good item!

Comment:
runs smoothly, accepts larger voltages than specified, in a position to be overclocked. does not get ridiculously hot none that are not inherent in the architecture and capacity of any equivalent solution a extremely good acquire

Comment:
Simple to install, fair packaging, uncomplicated design however highly effective results! My set fails on a cold start out-up, but following a couple of minutes performs like a charm. RMA'ing it. EVGA P55Intel i5 760Corsair XMS3 4GB (once I get them back)WD 150GB + WD 320GBW7 64bit650W PSUGeforce GTX 275Inventive x-fi xtreme gamer

Comment:
-low timing-heat spreader-1.65V instead of 1.75-corsair=reliable-low cost for 4go dd3 1600 with low timing and very good quality create AND heat spreader -wouldn't function with gigabyte p55a ud3 but it isn't really a con functioning perfectly with a i7 860!!

Comment:
Worked appropriate away. I had to enable XMS on my MB to make it run at 1600. Its been steady given that. none so far * CPU: Intel Core i7 860* MB: Gigabyte GA-P55A-UD3* Graphics card: SAPPHIRE 100293L Radeon HD 5570 1GB* Memory: CORSAIR XMS3 4GB ƒ x 2GB) CMX4GX3M2A1600C8* HD: Western Digital Caviar Black 640GB* OD: ASUS DVD burner DRW-24B1ST/BLK/B/AS* PSU: CORSAIR CMPSU-650TX * CASE: COOLER MASTER Centurion 534 RC-534-KKN2-GPDid not overclock however..

Comment:
Corsair make some of the very best memory out there. Worked better than advertised. Glad I bought it just before the value jumped. None Utilized in Asus 890GX Pro MB, like absolutely everyone else had to manually set to 1600mhz

Comment:
Quickly and straightforward set up did not get 1600mhz at very first but was easily fixed through bios went in and set them to 1600 at 9-9-9-24 1.56v my specs mobo M4A88TD -V EVO/USB 3. AMD Athlon II X4 630 Propus two.8GHz Socket AM3 95W FOR These WHO HAVE PROBS WITH THIS MEM Need TO Check THE QVL FOR THERE MOBO AND MAKE Positive HARDWARE IS COMPATIBLE AND FOR ANY Queries ON RAID NO IM NOT Running ANY RAID SETUP UP I HAVE 1 ITB HITACHI 1 500GB HITACHI AND A 400 SEAGATE FOR OS ALL Operate Excellent AND Bought FROM NEWEGG WITH NO HASSLES Such as SHIPPING ALL Within 3 DAYS OF Purchase AND IM FROM GEORGIA. NONE AT ALL. Strategy ON Obtaining 4 More GIGS. PLEASE MAKE Certain YOU KNOW 100% OF WHAT YOUR Talking ABOUT Before POSTING Poor Evaluations ABOUT Solutions THAT YOU HAD Bad LUCK WITH.

Comment:
Memory 4GB ƒx2) is rock solid @ 1600 with eight-eight-8-22-30-1T @ 1.62volts in a Gigabyte 890GPA-UD3H, of course this is not the default settings. Will try 8GB when the value is far more agreeable. The price improve over the past 2 months.

Comment:
Purchased as a combo deal with my ASUS P7P55D EVO Mobo & Intel Core i5 750 CPU. Runs completely, really rapidly. Extremely steady at advertized speed. Haven't had a single issue. About to acquire a different 4 gig. none Method Specs:Antec 900 ATX Mid-TowerCorsair TX750 Watt PSUASUS P7P55D Evo MoboIntel Core i5 750 CPUATI Radeon HD 4850 1Gb DDR3 GPU4 GB Corsair XMS3 DDR3 SDRAMSeagate Barracuda 1 TB HDDWD Caviar Black 250 GB HDD

Comment:
Operates as intended. None yet.

Comment:
rapid, fast, and cheapish none the voltage, yes it is set to like 1.eight on some mobos so just launch ur bios and enter quickly and set it to 1.55. it says a voltage of 1.65 but i use 1.55 to be secure and everything has been stable. also update ur bios because alot of asus boards just released an update for some RAM with this challenge!

Comment:
bought two sets, all four sticks ideal situation. required to update bios to get voltage correct when on auto setting, but that has absolutely nothing to do with the ram i want i would have bought 4gb sticks from corsair rather

Comment:
I cannot say considerably other than it functions and it functions great. I've had no troubles what so ever. I've even attempted to adjust the timings and DRAM settings for the initial time and this RAM gave me no problems None

Comment:
Used this RAM for my i5-750 develop, and have been incredibly happy with it so far. I was a bit sketchy about how well it would function with my motherboard (ASUS P7P55D Pro), but it posted just fine on initial boot. So far it's been a common Corsair product: good top quality and incredibly steady (even with overclocking experiments). In order to get the RAM to run @ 1600, you will have to apply an overclock (at least if you use the similar board/CPU as me). The efficiency was excellent ahead of discovering this out, so not a large deal, and it most likely isn't going to be noticeable to most individuals. I'm at the moment overclocked to three.6ghz, but a speed of 1600 is available at decrease CPU clock speeds. Check the voltage in your BIOS on 1st boot. I didn't have any troubles with mine, but have heard horror stories about automatic voltage settings on some motherboards cranking the RAM/CPU voltage to the point where you threat harm to your method. I was fine on very first boot, but it's definitely a thing to verify.