G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1100 (PC2 8800) Dual Channel Kit Desktop Memory

Comment:
Booted at ddr two 800mhz 1.8v with a setting of auto on a ma785gm-us2h gigabyte board, Phenom II X4 905e. The memory would not pass a windows memory diagnostic even on the first of two passes at 1.9v 1066mhz, however, it would post. finally passed at 2.0v at 1066mhz, above the companies spec and appropriate on the edge of the board spec so I was not tempted to go for 1100mhz and I required the timings not to exceed CL 5 on the initial stick. So... now I have a build out of spec. The Memory that I received did not meet the manufacturer spec as advertised. I purchased this memory due to the fact of the functionality spec of ddr two 1100 at 1.8v to 1.9v simply because of a thermal design and style consideration for low watt, low heat overall performance. I did handle to squeak by on the develop, nevertheless, if I was willing to accept ddr2 800 I would count on to pay the price tag for ddr2 800 at timings of five-5-5-15 or get timings of four-four-four-12. NewEgg was quickly as usual. NewEgg Rocks!! Manufacturer Response:.Dear ClientWe are sorry to hear that you are not impressed. Based on the motherboard, it may well not be supplying the complete voltage despite the fact that it is set to 1.90V. Verify actual memory voltage for correct benefits. Simply boost the memory speed to DDR2-1100 as it will have no difficulties with 2.0V and CL five timings. If you have any additional inquiries, please feel free to let us know.Thank youGSKILL SupportQuality and consumer service are our best priorities.Tech Help E-mail: ustech@gskillusa.comRMA Dept E mail: rma@gskillusa.comG.Talent Forum: http://www.gskill.com

Comment:
Worked out of the box. Runs steady at 1098 mhz @ five-5-5-15. Program won't post once the fsb goes above 1100 with fixed five-five-5-15 timings. I'm pondering with larger timings I could raise the fsb a lot more, but so far I see no need to have to try. intel e8500 + gigabyte ep45-ud3r.

Comment:
Had these 2x2 sticks for about 13 months now, and operating @ 5-5-five-five-15-52-2T, 1Ʌ, MemSet Perf. Level 8 on ABIT IP-35 Pro/E8400. No probs. Wh00p! None for the low volts/temp vs. speed/timings.

Comment:
Superb Ram. Runs as advertized. I loaded up with eight Gig and it came up at speed on my EVGA 780 motherboard. Opens up almost everything beneath Vista x64. Lots of headroom to have far more apps open than most can use at one time. Under no circumstances have an app crash for lack of memory once more.Greatest use for programs like Photoshop, which can use all the memory you can throw at it. Drastically speeds up operations and massive file handling.Do tyourself a favor. Max your RAM out. It will let your technique reside longer, operate more effectively and do far more. None. Regrettably not as valuable for Win XP 32 bit systems. They only see 2.75 Gig at finest. Exceptional latency for the speed, tho I run mine at five-5-5-15 at rated speed. I don't OC the RAM. No need to have to, its rapid enough. Could run it quicker. I played around with it a bit just to see. Left mine at 1.9v. Keeps the RAM cool. The heatsinks are slightly warm to thwe touch, so my technique's airflow keeps the Ram cool.They are nice searching in the program make, and match most any color scheme you may well have.

Comment:
Functions wonderful on my new develop desttop None at all

Comment:
Low Voltage.Performs excellent Asus Rampage Formula.Everest Memory Scores have reached close to 10000 mb/s. (They will with some much more tweaking). None Works good on ASUS Rampage Formula at 1125 with performance profile of 7. Have not tried 6, but will. Since I have phases pulled into six and is rock solid steady.

Comment:
This is some fantastic RAM for the worth. Stays good and cool in the case with a wonderful heat sink. RAM overclocks nice and offers Excellent stability at greater clock speeds. Heat sinks are a bit higher, produced it hard to set up with artic cooling freezer 7 and some energy chords going to disk drives in antec 300 circumstances. Would advocate this RAM to anybody building a performance method.

Comment:
Worked properly on my GIGABYTE GA-MA785GM-US2H. Both sticks timed appropriately on auto, and passed a round of mem test with out concern. Due to my FSB, my RAM is slightly below-clocked at 1080 Mhz. Even so I loose stability in prolonged blended P95 testing if I drop the voltage beneath two.0v. (Mobo essentially shows it receiving 2.03v). G. Ability Cust service states this slight over voltage is ok, and the RAM ought to be safe up to two.1V. So it really is not a massive deal unless you were going to over clock the ram, then you wouldn't have significantly additional voltage to perform with. G.Talent Cust service responds really promptly to e mail to answer your inquiries. Also, I am by no means a personal computer specialist, and can not fully say that the voltage challenge may be anything else I am carrying out wrong in my bios. Manufacturer Response:.Dear BuyerThank you for your G.Skill purchase and evaluation. Glad to hear the memory is functioning appropriately in your program. It is odd that your motherboard is requiring additional voltage to be stable, but it ought to not be a problem. All G.Talent memory modules are made for overclocking, so they will be in a position to handle the added voltage. If you have any additional questions or difficulties, please feel totally free to let us know.Thank youGSKILL AssistanceQuality and buyer service are our leading priorities.Tech Help E mail: ustech@gskillusa.comRMA Dept Email: rma@gskillusa.comG.Talent Forum: http://www.gskill.us/forum/

Comment:
Purchased a second pair of these, to upgrade from 4GB to 8GB. No challenges, my Computer took off operating with the same mild FSB overclock settings (to get the 1100 MHz vs. the regular 1066 MHz with the exact same FSB multiplier) and voltages as prior to. I didn't have to adjust a factor, plug 'n play. . Functions flawless. None, unless you want to count that DDR2 is becoming phased out in favor of DDR3 today. Wish the price tag had come down on DDR2 by now, but definitely wanted to get the precise identical matched RAM once more. G. Talent memory has been truly great for me.

Comment:
This stuff is high top quality. I did a ton or analysis by trial and error for my DFI P45 JR T2RS MB with diverse kinds of DDR2 that presented higher overall performance and bang for buck. Ran the top rated names and models and this ram was the best. Not to mention the price tag was sweet. None.

Comment:
Quickly RAM, cool searching heat spreader/heat sink. The timing has to be manually set in the BIOS, and make certain you're operating the right voltage as well. My RAM seemed to be happiest with 1.9 volts. Haven't pushed it beyond 1066mhz. I'd picture that it would be fine, but I haven't tested it yet. Manufacturer Response:.Dear ClientThank you for your G.Ability obtain and critique. The memory package you purchased is above the maximum default standard, so manual settings should be utilised, or the EPP/XMP Profile have to be enabled for the motherboard to automatically make these changes for you. Glad to hear anything is operating smoothly. The memory package will have no difficulties operating DDR2-1066+ particularly if you are only working with 1.90V at the moment. There is significantly room for overclocking. If you have any additional queries or issues, please really feel absolutely free to let us know and we will be glad to help you.Thank youGSKILL HelpQuality and customer service are our best priorities.Tech Support E-mail: ustech@gskillusa.comRMA Dept Email: rma@gskillusa.comG.Talent Forum: http://www.gskill.us/forum/

Comment:
I was working with Critical ram for a year. And have several rebootsThe ram all strategies checked out very good. I gave up on it and got the G. Gkill and have used it for all most 2 mo. now .It over clocks great and have not had a shut down or reboot in all this time. None .

Comment:
Extremely RapidlyStablePerforms as advertised None Bought this RAM to overclock an Q6600 with a Intel BadAxe2 board bought from NEWEGG a whilst back. The ram is really quick and stable, and runs cool to the touch. Soon after Prime95 for 11 hours the RAM was still coo/warm. Quite delighted with this obtain. Will obtain yet another set to overclock AMD Phenom II.

Comment:
I bought two kits of these and they run amazing. Each had been immediately recognized by my board(gigabyte ep45-ud3p, F8 BIOS at time of set up) and are at present operating at five-five-5-15-52-2t latencies at 1125mhz 1.96v, quite dang good for a ddr2 kit in this value variety. Kits were also packaged decently, have an excellent hunting heatspreader, and run at low temps. Bland packaging, couldn't get to run at 1200mhz at 1.9v like other reviewers but I'm nevertheless convinced it can be completed.

Comment:
My somewhat iffy 780i board has been extremely steady due to the fact I installed this RAM - proper out of the box, no tweaks to settings at all. Can't tell you a factor about overclocking, even though - I run mine bone stock for longevity. None I know XP will only recognize 4 GB, and I have 1.five tied up in the video cards, so I seriously only gained .5 gigs on my upgrade from a 2x1 setup - but the stability over the 'buccaneer brand' I was employing just before was nicely worth it.

Comment:
I guess it would have been good if it worked Gigabyte ga-ep45-ud3p wasn't really pleased with it. Google endless reboot issue. I guess if I was seriously actually good with advanced tweaking and timings it would have been ok, but for a very first time builder it wasn't extremely cooperative with this board. I switched to corsair that 5-8 evaluations indicated worked wonderful very first plugin. None Manufacturer Response:.Dear clientWe apologize this inconvenience. Please speak to our RMA Dept for warranty replacement. We will assist you to replace your poor memory moduleThank youGSKILL HelpQuality and customer service are our top priorities.Tech Help Email: ustech@gskill.comRMA Dept Email: rma@gskill.comG.Ability Forum: http://www.gskill.com

Comment:
Fantastic 1066 Ram Could not get this ram to run at the rated 1100 Mhz. I manually set the timings to 5-five-five-15, the voltage to 1.9V and the clock to 1100. Merely would not post. Even following growing voltage and the timings, it nevertheless would not post. It wasn't until I lowered the clock to 1066 that I ultimately got it to post. I ran memtest at this speed for hours with no errors. On the other hand, due to the fact I didn't get what I payed for, I want my funds back. Manufacturer Response:.Dear ClientWe are sorry to hear you are obtaining concerns setting up the memory. For some motherboards, you could need to have to raise the NB Voltage or memory controller voltage to stabilize the higher memory frequency. Depending on your CPU, you might also want to make further BIOS tweaks. Please contact our technical help division with your computer system specifications and they will be capable to get it running smoothly.Thank youGSKILL SupportExcellent and buyer service are our best priorities.Tech Assistance Email: ustech@gskillusa.comRMA Dept E-mail: rma@gskillusa.comG.Talent Forum: http://www.gskill.us/forum/

Comment:
Higher speed for somewhat low cost, Heat sinks match collectively, so even if Dimm Channels are close together, the coolers will nonetheless match. Haven't Played with OC yet, but I picture They need to go from 1100 to 1333 with a tiny tweaking. As of now, none, while the very same style that I praised in the Pros could also lead to elevated heat due to the proximity of the fins to every single other. time will tell. I would have loved to have a additional thorough evaluation of this solution, but alas, I am lazy. But if you want to go with something a tiny more rapidly than ddr two 800mhz and at a decrease voltage, go with this :)

Comment:
I'm running this RAM linked to my CPU at 1120MHz making use of five-5-5-15 timings @ 1.9v. And I did not have to unwind any other timings. It's low voltage, and overclocks rather nicely :) None. Nicely, some LED's would've been cool :P To the two reviewers under me. Did you attempt rising your NB (SPP) voltage? Mainly because this RAM is running completely fine for me at 5-5-5-15 and 1.9v. In fact, it'll overclock to about 1150MHz at 5-5-five-15 without relaxing any other timings...

Comment:
no pros for me.. will not run at rared speed and timings at 1.eight-1.9volts..running it at 2.1volts 677 18 at 1066 still not stable... will in no way purchase gskill once more.... Manufacturer Response:.Dear ClientPlease contact us with your pc specifications and we will be more than glad to aid you get your computer running properly. If you are running two sets of these, your memory controller can be stressed out and you will need to have to make additional adjustments in your BIOS for the motherboard to be stable sufficient to operate this memory at complete speed and capacity. Notice when you run a single set the computer system will be steady, even though operating two sets it will not be nearly as steady. Thank youGSKILL AssistanceTop quality and consumer service are our top priorities.Tech Help Email: ustech@gskill.comRMA Dept E mail: rma@gskill.comG.Ability Forum: http://www.gskill.com