VPN: F3-10600CL9D-2GBNQ
Product ReviewsG.SKILL 2GB (2 x 1GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Dual Channel Kit Desktop Memory
|
75%
18%
4%
0%
4%
|
 Rating: Review Date: 08/03/13 |
|
|
Rating: Review Date: 07/07/13 |
Comment:
Cheap, Great Solution. No challenges encountered. NONE Only point that would make this far better is if I would have purchased 4GB much more when it was in stock. |
|
Rating: Review Date: 04/20/13 |
Comment:
Runs at the advised settings. In my 790 ultra it's warm to the touch but not hot. @ 1333 it's 1-1 w/ my Q6600 @ 3.. Affordable for DDR3! None truly. I doubt it OC's incredibly effectively but I haven't attempted it either. I just bought 2 more for my construct.:) EVGA 790i Ultra, Q6600 ʃ.0Ghz @ 28 C, 2x 9800gtx, and soon to be 4gb ddr3. It's a screamer. :) |
|
Rating: Review Date: 03/20/13 |
Comment:
- Price- Stability- Shipping Can't feel of any cons Was able to click this RAM from the default settings - 9-9-9-24 Ƒ.5v)to - 7-7-7-20 Ƒ.5v)Utilized 64-bit Memtest86+ off the Ubuntu64 boot CD with 100% passes at every single step to confirm stability. Then tested with 64-bit Vista operating 4x SETI for 24 hours.Attempting to post at a CAS of 6 caused a failure at both 1333 and at 1600. |
|
Rating: Review Date: 12/20/12 |
Comment:
decent memory for an typical built....this memory has lasted me 2years and counting none as a result far |
|
Rating: Review Date: 12/08/12 |
Comment:
Performs wonderful.Dual channelSee titleCost. Can not, in reality, be played like a harmonica. Shucks wonderful for a spending budget create or fast transplant in a Computer that requires it. |
|
Rating: Review Date: 11/04/12 |
Comment:
Even with the quite slight overclock ) my processor arrangement offers, this ram is nevertheless quite stable for hours on finish in intensive gaming. It gets rather hot. Although the rest of my ram does to... Nothing a fan doesn't fix. If I had much more ram slots, I'd acquire much more. This ram is good for your money. |
|
Rating: Review Date: 09/08/12 |
Comment:
functions good, went in uncomplicated haven't had a challenge none |
|
Rating: Review Date: 08/28/12 |
Comment:
place this in my backup machine and performs fantastic more than clocking seems to be very superior on this ram no problems this far and extremely fast. none. Excellent Deal I would but it once more if I had to. |
|
Rating: Review Date: 06/03/12 |
Comment:
It's a Fantastic RAM! High cost but well worth Every single penny!! Runs excellent. Cost... Absolutely nothing a lot, just..good RAM!! |
|
Rating: Review Date: 06/01/12 |
Comment:
4 gigs gives five.9 mem rating in Vista (I expected nothing less). For the value this RAM is remarkable. I've used G.Skill prior to and I've never had a difficulty with them. G.Skill also does a fantastic job advertising their RAM: the sticks appear cool and their packaging is just as nice. People say DDR3 is as well high-priced and there aren't adequate positive aspects over DDR2. But if you are building a new program, do not upgrade to old DDR2 technologies. This RAM is inexpensive and although you may have to shell out additional for a new mainboard, it's nicely worth it in the long run. This RAM runs incredibly hot like a different reviewer talked about. I have it running at the stock 1333 speeds at the specified 1.65volts. Unfortunately it will not overclock AT ALL. Even with loosening the timings I nevertheless had to unlink my FSB and RAM to get my processor to OC to get a stable setup that would not BSOD. I believed it was possibly a voltage issue but bumping up the voltage past 1.65v did nothing either. These were operating for me at 1.five volts stable (my mainboard had it at this default voltage), so I'm not confident why it says 1.65 volts on the specification page. This might have some thing to do with their heat issue. I'm not certain why individuals are saying that this RAM is costly? This is some of the cheapest DDR3 RAM there is, much less costly than even most DDR2. Even though it won't overclock (possibly a newbie mistake), it's somewhat to be expected with the value. But with 4 gigs running at 1333 anyway, I see no reason to attempt to OC it right now. I am operating an EVGA 790i mainboard with e8400 OCed to three.6ghz, and 9800gx2 with a Computer P&C 750watt psu. Almost everything runs exceptionally (computer rated 5.8 general in Vista) |
|
Rating: Review Date: 05/27/12 |
Comment:
SO far its fantastic. I've not accomplished any overclocking on it taking into consideration DDR3 RAM is nevertheless high-priced. But it's working with my ASUS P5E3 delux motherboard. None. |
|
Rating: Review Date: 05/09/12 |
Comment:
DONT BE FOOLED BY THE Value THIS RAM IS NOT Cheap (QUALITY) Performance IS Incredible .... VISTA RATING five.9 Fairly High-priced BUT Effectively WORTH IT JOIN THE GSKILL BANDWAGON |
|
Rating: Review Date: 05/04/12 |
Comment:
Works fantastic No troubles to date. |
|
Rating: Review Date: 02/09/12 |
Comment:
Plug them in, they function great! I like the heat spreaders, not only do they reduce heat but makes handling the chip a lot easier. No errors right after clicking them in and top notch overall performance. I'm impressed that with just this tiny memory, both World of Warcraft and Lord of the Rings On the internet show superior efficiency. Finest cost anyplace too. I can't hug them from my house. G-Ability has been my memory business for over a year, I've been happy with all of their solutions. |
|
Rating: Review Date: 02/05/12 |
Comment:
Even even though DDR3 is high-priced, gskill is cheaper than the rest.I bought the P35D3 Platinum mobo and set the voltage close to gskill's spec. I have no concerns with the memory and even ran the memtest 86 program.The memory has a flashy red anodized aluminum heat spreader Nonetheless high-priced, but worth it. I'm employing windows vista, so I ended up getting four gig. The memory is rated with at 5.9The memory is so high priced, I don't strategy on attempting to overclock it. I don't belive that had been be much of a gain in overclocking it either. |
|
Rating: Review Date: 02/03/12 |
Comment:
this ddr3 kit is wonderful, runs fantastic. quite low-cost for ddr3..but ram prices are dropping anyway.. fsb when i very first put them in was auto set to 1066..consider that was my mobo though..i corrected it and issues operate fine p5e3 delux wifi, 512mb GDDR4 3870 HD OC'ed Edition, 2gb G ability ram,2.4ghz q6600 at 3ghz, antec 900 case, 850 watt psu..SCREAMIN!! will be better with two additional gb of g ability..runs crysis well on incredibly high with the exception of stuttering..only because im running 2gb of ram..each and every other game, Great |
|
Rating: Review Date: 12/03/11 |
Comment:
The price Had to return four gigsƒ pair) of these since of timing troubles. When tested one stick at a time, they worked fine, but in pairs or sets they failed due to the fact the timings had been off. No overclocking involved. Caused a lot of video dirver problems. Replaced with Kingston and so far no much more troubles immediately after 1 week of use. Tried to cut some corners on my new construct and and save some dollars and it came back to bite me in the rear.Thermaltake Kandalf VD4000BWS CaseIntel QX9650 ExtremeAsus Maximus Extremetwo Sapphire Radeon HD 3850's 512mb4gig Kingston DDR3 1333 Pc 10600 |
|
Rating: Review Date: 12/03/11 |
Comment:
Good, attractive modules at an affordable value. Plays well with my Asus P5E3 Deluxe/WiFi AP motherboard. No concerns therefore far. None so far |
|
Rating: Review Date: 11/09/11 |
Comment:
Seems to be stable and quick, reasonable price for DDR3 memory My installation of an OEM version Vista HP 32-bit had some problems. Chose memory employing RAM Configurator on G.Skill web page. The QVL had 4GB and 6GB configurations for Gigabyte GA-MA785GMT-UD2H. Too pricey and unnecessary for a 32-bit OS. 1st, program hung in the course of installation. Difficult drive was reformatted and timing was manually set at 8-8-8-21 1T MHz. Noticed DDR3 was 1.6V. Could not lower voltage in BIOS. Critiques at G.Skill and this website were useful. Program installed w/o problems. Second, attempted to copy Vista SP1 from CD-R to desktop. Received error message with 1 min, 35 sec remaining prior to copy action was completed. Reset RAM BIOS to AUTO ƙ-9-9-24 2T , 1.6V) and rebooted program. SP1 file copied to desktop and installed w/o issues.Lastly, all drivers and updates installed w/o troubles. Vista SP2 was installed working with similar technique. Second memory stick installed. No problems. I've read 1 review that mentioned AMD CPUs are 'finicky' about RAM. Something to be conscious of when considering an AMD M/B.Conclusion: Would obtain once moreOS: Vista HP SP2 32-bitCPU: Athlon II X4 630 M/B: Gigabyte GA-MA785GMT-UD2H rev 1.RAM: F3-10600CL9D-2GBNQOC: NoBIOS: Award v6.00 PC |
|
Rating: Review Date: 10/31/11 |
Comment:
Works excellent. Looks superior. None |
|
Rating: Review Date: 09/12/11 |
Comment:
every little thing. applied on my asus p5q3 no difficulties. price$$ runs fairly warm antec 900 with stock fans removed and apevia 120mm red led high cfm fans in location, asus p5q3, gskill ddr3 1333, hec zephyr 750 psu, 2x250gig hds, vista ultimate 64-bit, q6600, 9600gt ssc edition. vista score 5.9s all across the board. |
|
Rating: Review Date: 09/09/11 |
Comment:
Amazing does the job they are supose to do. Dont genuinely need to oc them due to the fact the mobo does it itself so yea... I cant locate any but yes the ram runs hot... Get more fans!!!!! ASUS P5K3 WIFI DELUXE, E8400 3.6GHZ, 160GB WD HD, 4GB DDR3 1333, ATI 4870, APEVIA CASE |
|
Rating: Review Date: 09/06/11 |
Comment:
Actually quick. Low-cost in it's class. Heatsinks(needed). Hot. Quite, incredibly, hot. I don't know if it's normal but the RAM is running among 130F-140F Idol, and ꢘF under load. I can realize that it could run a little hotter then DDR2, but my old 4GB of DDR2-800 ran around 115F under load in the exact same program! I also have a GTX that is operating about 110F underload, so the RAM is crazy hot. It's operating so hot that the motherboard actually spits out a warning that it is nearing crucial temp if I try any kind of more than clocking at all. If this is regular for DDR3 then I would recommed getting something like Patriot Viper RAM that actually has far greater timings and a 'fin' like heatsink design. Will possibly cool considerably far better.Method: CPU-Q6600,Mobo-Asus P5K3,HDD-RaptorX 150GB,VCard-8800GTX,RAM-4GB of this stuff |
|
Rating: Review Date: 07/20/11 |
Comment:
Its got my Q6600 running at three.96ghz 24ǚ STABLE on my ASUS MAXIMUS ETREME None if its not BROKE then O/C till it dies................... |
None However. Ordered GA-EX58-D5 with Intel Core i7 940 and six G.Ability 2GB DDR3 SDRAM DDR3 1333 (PC3 10600).5 weeks in, the technique nonetheless will not post - won't even beep. Swapped both the board and the CPU - which took two weeks each - and exact same behavior. Am now asking yourself if the memory is compatible. G.Ability appears prepared to test the 3 components and let us know if they are compatible, and have a return policy that should aid out if an incompatibility is discovered. Manufacturer Response:.Dear customerwe will test this motherboard and post the outcome on our forum. or you can register our forum http://www.gskill.us/forum/ and post your qestion there. somebody will test this setup and let you know the result ASAPthank youGSKILL Help