VPN: F3-10666CL7D-8GBXH
Product ReviewsG.SKILL Ripjaws X F3-10666CL7D-8GBXH 8GB 2X4GB DDR3-1333 CL7-7-7-21 Memory
|
83%
5%
7%
2%
2%
|
 Rating: Review Date: 08/30/13 |
|
|
Rating: Review Date: 05/08/13 |
Comment:
Good CL7 memory for new Sandy Bridge CPUs. 1 of the sticks was defective. It occurs from time to time....I don't like it but it takes place. Now you really don't need low latency memory for SB, specially if you are employing H67 motherboard. There is quite small to be gained with this memory over a CL9 set. Manufacturer Response:.Dear CustomerWe are sorry to hear you received a undesirable module. Please send the memory in for RMA and the replacement kit need to work flawlessly. All G.Skill memory packages are backed by a lifetime assure for these varieties of circumstances. If for whatever purpose your memory is dead on arrival or becomes defective right after a couple days, weeks, or years of use, we will exchange it with a new replacement without question. If you have any additional concerns or concerns, please feel absolutely free to contact us directly and we will be much more than glad to assist you.Thank youGSKILL SupportGood quality and customer service are our top priorities.Tech Support Email: ustech@gskillusa.comRMA Dept E-mail: rma@gskillusa.comG.Ability Forum: http://www.gskill.us/forum/ |
|
Rating: Review Date: 04/28/13 |
Comment:
Quickly, DDR3. :) 9-9-9-25 until you adjust it. My mobo is the P67A-GD65. Manufacturer Response:.Dear BuyerThank you for your G.Skill purchase and critique. All DDR3 motherboards can only default up to DDR3-1333 CL9 (JEDEC normal). For any memory above this such as the one particular you have bought, manual settings will be needed. Or, the XMP Profile really should be enabled so the motherboard knows much better memory is installed, that way it can detect settings from the memory and adjust them for you. If you have any questions or issues, please feel cost-free to contact us directly.Thank youGSKILL SupportExcellent and customer service are our top priorities.Tech Support E-mail: ustech@gskillusa.comRMA Dept E mail: rma@gskillusa.comG.Ability Forum: http://www.gskill.us/forum/ |
|
Rating: Review Date: 04/10/13 |
Comment:
Very fast ram. Operating without having any errors at 7-7-7-21 1.5v as advertised. Have not but tried to OC it as it is rapid adequate.Good match to the MB. Not produced in USA. Asus M4A88TD-M/USB3Phenom two x 4 b55 |
|
Rating: Review Date: 02/15/13 |
Comment:
Excellent at rated timings. Be positive to set manually in your BIOS. None. Had stability issues with the comparable 8GBRH kit on my Gigabyte H67A-UD3H board. But this 8GBXH kit has been great. Go with these if you're developing a Sandybridge rig.GSkill's forum is superb. They will aid you troubleshoot should you have any problems. |
|
Rating: Review Date: 01/21/13 |
Comment:
Great, tight timings. Rock-solid. Excellent looks. It's a small pricey, but that's what you spend for tighter timings. I got this as aspect of a combo deal, so it was priced at the level of RAM with "normal" timings. Don't regret it a single bit. |
|
Rating: Review Date: 12/30/12 |
Comment:
Extremely quick delivery - even on the fundamental delivery choice. Got this for a develop for my dad. For his purposes (and most of my personal for that matter) he would under no circumstances know the distinction in this 1333 CAS 7 vs any 1600 ram. Would suggest G Skill to anybody. None |
|
Rating: Review Date: 12/10/12 |
Comment:
Works as advertised, 7-7-7-21 about 2050I am using it with a MSI NF750-G55and MSI N550GTX None so far GSkill should embrace AMD as properly as intel |
|
Rating: Review Date: 12/06/12 |
Comment:
Operate as anticipated on my 4.5GHz Sandy and at 1T. None Excellent Service from Newegg. |
|
Rating: Review Date: 12/02/12 |
Comment:
Every little thing runs smoothly, and it has exceeded my expectations. Win XP keeps bugging me about not acquiring sufficient virtual memory. Wants like 12 GB's of it. It won't see my external flash drive, which I was going to use for the page file. (it has 16 GB)Also, the heatsinks are a bit tall, my cooler only barely fit; it's touching them. I've noticed each two years the amount of RAM you want doubles. 2005 - 512 MB | 2006 - 1 GB | 2008- 2 GB | 2010 - 4 GB | 2011 - 6 GB. Subsequent year these eight GB will be normal most most likely. 2014 we'll require 16 GB. |
|
Rating: Review Date: 11/11/12 |
Comment:
Worked proper out of the box with an ASRock H61M/U3S3 motherboard. The bios automatically recognized the advertised timings. For everyone with only 2 memory slots, this is a wonderful option! nope |
|
Rating: Review Date: 10/27/12 |
Comment:
7CAS, 7.8 on WEI Not Free of charge OC'd to 1600 with no troubles on my Gigabyte board that died, ASUS board doesn't like it more than 1333. X.M.P. enabled. |
|
Rating: Review Date: 10/25/12 |
Comment:
it operates! easy to install! not a one particular! This is the ideal RAM I've had in any of my computers! It's stable, and rapidly and ROCKS. Really like it! |
|
Rating: Review Date: 10/12/12  |
Cons: none so far
Pros: fast, plug and it works oc realy well Comment:
works like a charm oc it to 2000 mhz whit 11-10-11-24-2n whit 1.6 volt right out of the box some kit can get to 2.2k mhz realy easyone of the best kit of ram you can get for the price |
|
Rating: Review Date: 10/09/12 |
Comment:
looks pretty It won't run at the specified timings. At present I can get it to 7-8-eight-23 or 7-7-7-21 @ 1066. If I try for 7-7-7-21 it won't boot up. Manufacturer Response:.Dear ConsumerWe are sorry to hear the memory is not operating to specification. Please really feel free of charge to send it in for RMA to see if a new kit operates far better. You really should have no troubles. If you'd like, you can test each and every module individually to confirm it is an problem with the modules. For all further concerns or concerns, contact our technical assistance department directly and they will be glad to assist you.Thank youGSKILL HelpTop quality and buyer service are our top priorities.Tech Assistance Email: ustech@gskillusa.comRMA Dept E mail: rma@gskillusa.comG.Skill Forum: http://www.gskill.us/forum/ |
|
Rating: Review Date: 10/03/12 |
Comment:
awsome memory to oc i got it to hit over 2300mzh with ease on air besides gskill obtaining liftime wrranty none whats so ever |
|
Rating: Review Date: 09/06/12 |
Comment:
Fast memory with great timings. Excellent for gaming. None |
|
Rating: Review Date: 06/30/12 |
Comment:
Plugged it in, motherboard recognized it and haven't looked back. Plus it looks excellent with all the blue motherboards out there. None This was created for the 1155 line of processors. Its super straightforward to OC it to 1600. |
|
Rating: Review Date: 05/31/12 |
Comment:
Worked, Good timings, No difficulties None Possibly bought G.Ability more than a dozen instances. always excellent constantly operates. |
|
Rating: Review Date: 05/07/12 |
Comment:
Runs perfectly at the rated speed and timings all day every single day with zero errors. Attractive look, with relatively low-profile heat-spreaders that remain eye-catching with no being garish or getting in the way. Excellent price for great timings in a 8GB kit. None at all. This is an uncomplicated recommendation, especially at existing prices (~贉). G.Skill has supplanted Corsair as my go-to memory supplier. I've never had a bad unit from them, and they deliver great hardware at a wonderful value point. |
|
Rating: Review Date: 05/02/12 |
Comment:
* 4GB sticks with my 1090T * 7-7-7-21 timings - DDR3 1333* Gorgeous blue eye candy * Now have 16GB's, enable's with VM's. * Nada at this time * Switched out eight GB OCZ DDR3 @ 1600, Cas 9 for these.* Sweet so far, auto defaulted in Motherboard to Cas 9 - had to manually change. No biggie - MB situation. * After manually settings, runs excellent at rated timings of 7-7-7-21* Have not tried to overclock, so can't comment. |
|
Rating: Review Date: 03/26/12 |
Comment:
Runs at rated timings, good looking sticks Fees additional than other sets It expenses a bit a lot more, but the timings are very tight and provide slightly superior performance more than their cheaper competitors. |
|
Rating: Review Date: 03/19/12 |
Comment:
Quick, functions like it ought to. Also, GSkill's tech support was very valuable. I couldn't uncover a definitive answer on no matter if or not this memory would be compatible with my board and they assured me it was and I purchased immediately.Newegg is always quickly with shipping. Generally it comes from the warehouse in Memphis, TN so I was excited to get it the next day seeing as how I'm in Nashville. Well this time it came from NJ and took an additional day but well worth the wait. None yet. Ran at 1333mhz with the auto timings in the BIOS AND when I set it manually.GA-890GPA-UD3H boardAMD 1100T BE 3.3ghz CPU |
|
Rating: Review Date: 02/15/12 |
Comment:
Reasonably affordable, runs extremely quick. Not a main con, but as other individuals have mentioned, I needed to tweak it a tiny to get it running at 7-7-7-21. |
|
Rating: Review Date: 02/06/12 |
Comment:
Just installed this on my first ever construct and it was recognized without having a difficulty by my motherboard at startup.It was also a bargain at . None The motherboard and CPU I utilized were as follows:Phenom II X4 955ASRock 880G PRO3 Am3+ Version |
purchased it because of 7 rating and my board only listed 1333 DDR3 .... works great none! good and can't beat the cost