Location: Home > Computers > Memory > Memory/RAM > G.SKILL F3-12800CL7D-8GBRH Ripjaws PC3-12800 8GB 2X4GB DDR3-1600 CL7-8-7-24 1.6V Memory Kit

G.SKILL F3-12800CL7D-8GBRH Ripjaws PC3-12800 8GB 2X4GB DDR3-1600 CL7-8-7-24 1.6V Memory Kit

G.SKILL F3-12800CL7D-8GBRH Ripjaws PC3-12800 8GB 2X4GB DDR3-1600 CL7-8-7-24 1.6V Memory Kit (G.Skill: F3-12800CL7D-8GBRH)
G-SkillVPN: F3-12800CL7D-8GBRH
Vendor: G.Skill
Price: $0.00 - $0.00 CAD from 0 stores
» Email this product to a friend   » Write a review
» Discuss on forum   » Post your deal
  Store Product Price  

Product Reviews

G.SKILL F3-12800CL7D-8GBRH Ripjaws PC3-12800 8GB 2X4GB DDR3-1600 CL7-8-7-24 1.6V Memory Kit
76%
Excellent
18%
Very Good
0%
Average
3%
Below Average
3%
Poor
Rating: 9.24/10
Calantha
Rating:

Review Date: 09/18/13
Comment:
I should admit that I am quite pleased with this set. They operate effectively. none A acquire effectively worth the $$.
Tristan
Rating:

Review Date: 08/21/13
Comment:
My initial set of 2X4GB memory. Fantastic timings. Running 7-eight-7-24 at 1666 Mhz with AMD Phanom II X4 965 at 4.0Ghz. Memory WEI rating 7.7. Fantastic client support. None
Lucian
Rating:

Review Date: 08/09/13
Comment:
Quick, great cost... no problems!BIOS automatically detected correct timings... set voltage and frequency and have been operating completely since. none Works properly... utilizing it w/ p8p67 pro & 2600k... had to clear RTC (cmos) on the p8p67 to quit double booting soon after setting to 1600mhz, but not the RAM's fault. It works and performs rapidly.
Jewell
Rating:

Review Date: 07/12/13
Comment:
Complements my 1090T nicely. WEI of 7.five. Blazing fast 1600 MHZ and low timings. None so far. Like a previous overview, I am also making use of this on an 890FX board, an Asus. Not as well certain why they don't sell this as AMD RAM. Set to run at 1333 on initially startup, but easily clocked to 1600 at BIOS settings.
Cyd
Rating:

Review Date: 07/06/13
Comment:
I upgraded my Q6600 (OC'd three.5) to the SB 2600k (primarily for flight simming) and the chip has performs wonderful! The build went outstanding with Asus P8P67 + G.Ability RipJaw 1600 (CAS 7) + Corsair H70 + Samsung 128 SSD + 3x Asus 22" LCDs + CoolerMaster HAF 922 case.The develop went flawless and I am operating the SB at 4.7 without having breaking a sweat or much by way of tuning. A tiny nudge to the Vcore and it's off to the races. I am delighted to report that the non "certified" RipJaw operates fine with the P8P67 Pro motherboard. Immediately after a rapid flash of the BIOS and clearing of CMOS, all ram and speeds have been accounted for. G.Talent is good. None.
Dallon
Rating:

Review Date: 03/24/13
Comment:
No troubles at all. They run nicely at 1600 and 2000 (OC). They fit fine in my motherboard and case. I suppose if you have a modest type factor the heat sinks might be an situation. Non.
Konala
Rating:

Review Date: 02/26/13
Comment:
Operates completely at 1600. Haven't tried overclocking it. It doesn't make waffles.
Bade
Rating:

Review Date: 02/02/13
Comment:
8 gigs, 4gig X two stickscompetitively pricednot cheap or gaudy searchingworks as you would expectwill absolutely buy a further set when it is required none so far, both sticks operate magnificent. construct is with a 1090t, msi 890fxa-gd70...reduced the latency and all the greater for amd cpu's. why they dont market place this ram as amd ram is beyond me.
Ludlow
Rating:

Review Date: 01/19/13
Comment:
They weren't DOA. Unstable at the SPD settings of 7-8-7-24. Kept acquiring bsod in windows. Set them to 8-8-8-24 and all is excellent. As well expensive. GA-890FXA-UD5 moboAMD Phenom II x6 1090TCorsair 850W PSU Manufacturer Response:.Dear CustomerThank you for your G.Skill acquire and review. We are sorry to hear you were unable to operate to specifications. It is very odd as the AMD hex core CPUs ought to not have a dilemma. If you continue to have problems and want assistance, please don't hesitate to get in touch with our assistance division directly. Thank youGSKILL AssistanceQuality and client service are our top priorities.Tech Help E mail: ustech@gskillusa.comRMA Dept Email: rma@gskillusa.comG.Ability Forum: http://www.gskill.us/forum/
Carminda
Rating:

Review Date: 01/04/13
Comment:
great speeds, quite effortless to more than/under clock The price is a little on the higher side but not to poor when you're in a position to catch it on sale.
Cody
Rating:

Review Date: 11/02/12
Comment:
My "old" 4 gig F3 12800CL7D-4GBRH kit has worked perfectly for nearly a year. I want far more. Non so far Difficulty is my F3 12800CL7D-4GBRH kit at 7-7-7-24 doesn't look to be readily available anymore. Can I combine this 7-eight-7-24 kit with my older sticks? I'm not a severe overclocker now but I would like the window of opportunity to be open if I require it. Method is MSI P55-GD65 with i7-860
Inari
Rating:

Review Date: 10/28/12
Comment:
Good design and price Didn't operate with my Gigabyte P55A-UD3 motherboard. On some boots process would only detect 8GB out of 16GB installed (I got four modules) and either way there will be failed memory tests, bluescreens and so forth. Replaced with 4 x 4GB Corsair Vengeance kits and they appear to function fine now. Manufacturer Response:.Dear ConsumerWe are sorry to hear you had troubles. This is a 8GB kit, so it is only guaranteed for 8GB. While you can try utilizing two kits in the same method, it is attainable that they have troubles operating with each other on the same technique. If you want a 16GB kit, it is extremely encouraged to purchase a 16GB kit. Otherwise if you do not, you may well encounter such troubles again. If you have any additional queries or issues, please don't hesitate to ask.Thank youGSKILL HelpQuality and client service are our top priorities.Tech Assistance E-mail: ustech@gskillusa.comRMA Dept Email: rma@gskillusa.comG.Skill Forum: http://www.gskill.us/forum/
Jefferson
Rating:

Review Date: 09/13/12
Comment:
looks cool, low CAS lat. c7 when installed in my technique, the computer felt sluggish. when i ran passmark, the score dropped on cpu, hdd, mem, video, and cd. known as and spoke to G.Ability a number of times and tried all their aid, but just didn't strengthen more than my 8gigs of Kingston Hyper x c8 memory. G.Skill cust. assistance is great, and they stand behind their item. just didn't want to get stuck with memory that slowed down my pc, so i just returned for refund. this mem. may possibly operate superb for other people, just not for me. Manufacturer Response:.Dear ConsumerThank you for your G.Skill purchase and evaluation. It is odd that this kit produced your method seem sluggish. There may well have been a difficulty with the kit. This is one particular of our best performing kits, so the results really should be extremely good. Hopefully you future G.Skill expertise will be far better. Ought to you have any concerns or require help, please feel totally free to speak to us straight.Thank youGSKILL HelpExcellent and buyer service are our leading priorities.Tech Help E mail: ustech@gskillusa.comRMA Dept E-mail: rma@gskillusa.comG.Ability Forum: http://www.gskill.us/forum/
Marlas
Rating:

Review Date: 08/19/12
Comment:
works at spec; fantastic deal for the efficiency none Gigabyte GA-890FXA-UD5, Phenom II x6 1090T. I set almost everything to the SPD values listed in BIOS, except for 7-8-7-24. Ran a pass of Memtest 86+. Auto voltage is 1.51V, which is beneath 1.6V rating. Not certain why they don't sell this as AMD RAM.
Demitrius
Rating:

Review Date: 07/17/12
Comment:
*great look*works fantastic, no troubles *wish it was more affordable but I knew what I was buying and for how a lot.... value is not a con if you chose to acquire it. it'll default as 9-9-9-24 with out XMP. Once I set that up it ran smoothly with no issues at advertised speed/latencyGot set up with my MSI-P67A-GD65 motherboard with no concerns
Quinta
Rating:

Review Date: 07/07/12
Comment:
Stable and quickly. Runs as advertised with 8GBs at 7-8-7-24.With 16GBs I had to set the CAS to 8-8-8-24, on the other hand, it is rock solid. Antec Nine Hundred Black Steel ATX Mid TowerASUS Crosshair IV Formula AM3 AMD 890FX SATA 6Gb/s USB three. ATX AMD MotherboardAMD Phenom II X6 1100T Black Edition Thuban 3.3GHz, three.7GHz Turbo HDE00ZFBGRBOXCOOLER MASTER Intel Core i5 compatible GeminII S RR-CCH-PBU1-GP 120mm Sleeve CPU CoolerMEM 4Gx2 GSKILL F3-12800CL7D-8GBRH (Ordered two TTL16GB)CORSAIR HX Series CMPSU-1000HX 1000W ATX12V 2.2 / EPS12V two.91 SLI Ready CrossFire Ready 80 PLUS Certified Modular Active PFC Compatible with Core i7 Power SupplyWestern Digital VelociRaptor WD6000HLHX 600GB 10000 RPM 32MB Cache SATA 6.0Gb/s three.5" Internal Difficult Drive -Bare DriveLG WH10LS30 10X Blu-ray Burner - LightScribe Support - Bulk - OEMSAPPHIRE 100312SR Radeon HD 6950 2GB 256-bit GDDR5 PCI Express two.1 x16 HDCP Prepared CrossFireX Assistance Video Card with EyefinityWIN Residence PREM 7 64-BITWEI:Processor: 7.fiveRAM: 7.5Graphics: 7.9HDD: five.9
Venetia
Rating:

Review Date: 06/12/12
Comment:
does the job บ less expensive then ten ago when i bought them i7 875k three.8; 8gb ripjaws 1600; giga p55a ud3; evga 570sc; corsair 850; 1tb blue; 1.5tb green; 64gb essential ssd three.; h70 push/pull with tb silence 120mm; lg bluray; hafx w/ 200mm in front, 230mm in side, 120 p/p back, 2x200mm out top
Lindsey
Rating:

Review Date: 05/23/12
Comment:
Amazing tech support quite knowledgeable people my program is 50% faster that prior to on just common memory.My games fly like the wind. Cash nicely and I do mean effectively spent. NONE Call for what memory is recommended for your motherboard or what u can install before you get this way u will be one hundred% happy. You will like the results u will get I did!!!!!!!!:)
Renardo
Rating:

Review Date: 05/18/12
Comment:
Excelent memory, the technique booted up at default and was able to set timings with a tiny help from Gskill phone assistance as this was my 1st full AM3 platform develop. Runs beautifully immediately after some tweaking and locating out that the processor won't manage the memory in the first two slots of the board i'm using on this construct. NONE This ram went into an upgrade create for my Girlfriend consisting of an MSI 980A-G65 motherboard, and a phenom II 970 along with a seagate 1tb 32gb cache HD. Rig performs flawlessly right after clearing errors triggered by the memory controller deciding it didn't want to play great with the very first two slots of the motherboard.
Bain
Rating:

Review Date: 04/12/12
Comment:
A single DIMM worked 1 DIMM DOA This is not the cheapest RAM, in truth about 40% much more expensive that my other option. I would hope the QC approach would be a tiny better. The shipment did get stuck due to the fact of climate and a tough drive was DOA as properly, could be rough handling or sitting in the cold but I would believe RAM would not be affected by this. Manufacturer Response:.Dear CustomerWe apologize for the inconvenience. We are sorry to hear one module arrived defective. Please send it in for RMA and the new kit really should function flawlessly. This is 1 of our most common kits as it gives a great balance of speed and capacity. 8GB is adequate for most customers, and the DDR3-1600 CL7 rating will bring overall performance similar to that of DDR3-2000 without extensive overclocking. For those that are unfamiliar with overclocking, but nonetheless want a overall performance process, this would be an ideal kit. If you have any further queries or issues, please feel free to get in touch with us directly.Thank youGSKILL HelpQuality and buyer service are our prime priorities.Tech Assistance E mail: ustech@gskillusa.comRMA Dept E-mail: rma@gskillusa.comG.Skill Forum: http://www.gskill.us/forum/
Lazarus
Rating:

Review Date: 04/03/12
Comment:
Oh SO snappy! A lot Appreciate to my fellas at Gskill! I've been reading many a assessment and have noticed that they respond to an overwhelming number of them, positive or negative feedback included! That was the original reason I decided to make the jump from 4 to 8gb. Now, I own the ram and clocked it to 1600mhz and my mb did the rest adjusting the voltage accordingly! By JOVE!!! It's STABLE as rock! Substantially snappier than the prior 4g Corsair 1333mhz Cas 9 ram I had ahead of. None so far with exception that maybe your motherboard may possibly detect it at 1333mhz as an alternative of 1600mhz but that's a simple fix in the bios. :) G.ability, I've heard about you! I've recognized you and I'm incredibly content to have part of you in my personal computer! I may take into account 16gb as time progresses! (Best value for buck indeed) :D
Rufin
Rating:

Review Date: 03/21/12
Comment:
Fast Ram for 8gb kit/works good/easiest setup I've had in awhile, just set xmp profile and running 1600 @ 7-8-7 24 much more expensive than other 8gb 1600 kits well worth the xtra $
Tryna
Rating:

Review Date: 03/02/12
Comment:
Functions as advertised. no complications. While not genuinely advertised for AMD AM3 , it's just fine. I'm running 1055T on Asus 84A89GTD PRO/USB 3 at 1600 CL 7 all day lengthy., none.
Nyx
Rating:

Review Date: 02/17/12
Comment:
Superior price for this speed and capacity.8GB in two slots... puts a smile on my face just thinking about it Had to boost the latency to 8-8-8-26 (just a bit greater than spec) to get stable operation 򜩀 in my system (Phenom X4 905e). Greater voltage did not assist. It could work better with newer CPU's, though. Note: at 1333, these chips were stable at the advertised timings and voltage. Utilizing with the Phenom X4 905e, and an AMD 890GX chipset mini-atx motherboard built by MSI. Throw in a cable-card tuner from Ceton and you have a sweet HTPC. Going up to 8GB of RAM is icing on the cake.Prior to acquiring these, I had a set 2x2GB sticks produced by a diverse company - the heat spreaders created them so thick I could not fit them into adjacent memory slots (which is necessary for dual-channel operation). That's not a challenge with these DIMMs - they fit with enough space in-among to allow for superior air flow. Manufacturer Response:.Dear CustomerThank you for your G.Skill obtain and review. You are experiencing a widespread concern that we can help with. Your CPU has a DDR3-1600 memory ratio, but it is truly not the ideal a single to use. Please refer to this guide to configure the memory appropriately:http://www.gskill.us/forum/showthread.php?t򖳘With the memory configured properly, you really should be in a position to attain CL7. If you have any problems or concerns, feel free to speak to us directly for assistance. Thank youGSKILL AssistanceQuality and consumer service are our leading priorities.Tech Support Email: ustech@gskillusa.comRMA Dept E-mail: rma@gskillusa.comG.Skill Forum: http://www.gskill.us/forum/
Leroy
Rating:

Review Date: 01/17/12
Comment:
XPS Profile recognized by my ASUS Sabertooth P67. With an i7-2600K CPU I was in a position to overclock to three.8GHz with out much believed. Have but to see how far I can push the technique as it is only a few days old at this point. none
Click Here Show More Product Reviews

Product Features

Product Specifications

 
Cas Latency: 7
Voltage: 1.6V
Multi-channel Kit: Dual Channel Kit
Timing: 7-8-7-24
Heat Spreader: Yes
Features: Compatible Chipset: Intel P55
Parts: Lifetime limited
Labor: Lifetime limited

Similar Products

PriceBat.ca is 100% Canadian Own premier price comparison shopping site. Easy to search & compare prices of computer products, electronics and games at Canada online stores.