Location: Home > Computers > Components > Cooling Fans/Heat Sinks > Swiftech MCB-120 "Radbox"

Swiftech MCB-120 "Radbox"

  Store Product Price  

What is on Ebay

  End Time Product Price  
(MCB-120) 1926 AU 2d brown KGV (CD) (MCB-120) 1926 AU 2d brown KGV (CD) $1.71 CAD Shop Now
Swiftech MCB-120 (Rev2) Radiator/Fan Mounting Radbox Swiftech MCB-120 (Rev2) Radiator/Fan Mounting Radbox $38.44 CAD Shop Now
Swiftech MCB-120 Rev2 Radbox radiator/fan housing Swiftech MCB-120 Rev2 Radbox radiator/fan housing $38.44 CAD Shop Now

Product Reviews

Swiftech MCB-120 "Radbox"
32%
Excellent
58%
Very Good
11%
Average
0%
Below Average
0%
Poor
Rating: 8.42/10
With 19 User Reviews
Non-Anonymous@NCIX
Rating:

Review Date: 12/06/09
Cons: Kind of expensive for plastic and bolts, but meh...

Pros: Simplifies mounting to smaller casesCan surprisingly take a lot of weight
Comment:
Allows mounting to smaller cases to be a breeze. I had stacked rads with 3 fans on this, although I think I am close to the weight limit, it'll hold. Not a lot else to say, it's kinda pricey but 20 dollars isn't a huge deal.
+Zer0+@NCIX
Rating:

Review Date: 09/27/09
Cons: comes with only 1 type of nylon spacerno screws for 38mm thick fanspricey for a piece of plastic

Pros: sturdy constructioneasy to installlooks good with the logo on the side
Comment:
It does what it's supposed to and looks good. Even though it's plastic, it feels very sturdy and can support a triple rad with no problems. It installed just fine on a P182 after I dremmeled out 2 notches on the side panel.It only comes with 1 size spacer so you have no choice on the amount of space between the case and the radbox. It also does not come with screws to mount 38mm fans. It had 4 long screws which I used to mount the back plate to the case but the other size screws are only long enough for 25mm fans.
xfob@NCIX
Rating:

Review Date: 09/20/09
Cons: PlasticPrice

Pros: Holds my 3x120 rad
Comment:
This is a great mount, but I think it would have been better if it was metal. The plastic feels kind of cheap and it just scares you that it might just break. It's kind of expensive for a little plastic bracket too.
Aevnar@NCIX
Rating:

Review Date: 07/27/09
Cons: - The 4 small screws holding the 2 halves together are rather flimsy, and could break if any preassure is applied against the rad

Pros: - Easy to install- Strong enough to hold a triple rad + 6 fans- Conveniant to avoid modding your case
Comment:
I got this to mount a MCR320 triple rad on the back of my Silverstone TJ10 case. I already have a double rad installed inside the case using the Silverstone RadSupport. This thing works great, easily and as expected. This review was modfied by poster @ 07-27-09 10:24 AM
Andrew_L@NCIX
Rating:

Review Date: 08/20/08
Cons: None.

Pros: SizePriceValue
Comment:
This little gadget right here lets you mount a radiator externally, and that, is a great advantage. Since the radiator is outside, it iwll be more cooled; yielding better temps in the system
Matt_B@NCIX
Rating:

Review Date: 07/31/08
Cons: expensive for a simple device

Pros: does the jobblackstrong enough for a dual rad or more...Allows for a variety of mounting options
Comment:
does the trick.. looks good with the little swiftech logo. It is plenty strong enough to support an MCR220 with 4xScythe Kaze Jyuni fans.
asdf_@NCIX
Rating:

Review Date: 06/18/08
Cons: 1) Plastic material was a surprise (got the impression that it would be metal for some reason)2) Has 4 TINY screws to mount the frame onto the case, the frame could have been thicker3) Price could have been lower

Pros: 1) Works2) Installation didn't need a rocket scientist3) Secure for a single-120 rad4) Looks ok
Comment:
Bought this to go along with the Swiftech H20-120 system. Mounting went flawlessly, and I've left it on the case even though I'm not using watercooling atm because its not completely hideous. Its made from plastic, which was a bit of a surprise, but it seems secure enough to hold the single 120 rad that I mounted on it.
Mathieu_L@NCIX
Rating:

Review Date: 06/10/08
Cons: None except maybe the price

Pros: Does waht it is supposed to do, and I workswith MCR320, I used one
Comment:
Easy to set up with good instruction. My case (antec 900) had the holes to put the screw in. If you dont have a 120 mm fan in the back of your case you will maybe have to drill some hole. But a simple drill will do the trick. Overall good product taht does eactly wath it is supposed to d.
werth@NCIX
Rating:

Review Date: 06/03/08
Cons: none.

Pros: mounts the rad well.
Comment:
what more to say. mounts the rad at the back of the case. does the job for a few bucks. not sure if there are even any other options out there?
Nivek24@NCIX
Rating:

Review Date: 05/30/08
Cons: instructions could be a little better, it's somewhat pricey for what it is

Pros: did the job, looks alright
Comment:
Does an alright job, I have a 2 x 120mm rad on it and it seems secure. It looks alright. Only problem is the instructions could be better and it's a little pricey for what it is.
Alex_B@NCIX
Rating:

Review Date: 03/22/08
Cons: Expensive considering it's just a stand-off

Pros: Easy to mountPretty solide
Comment:
Does the job. I have a 2x120mm rad on it and it's very secure. Instructions could be a little better tho, but I didn't have to use em.
Seitan@NCIX
Rating:

Review Date: 03/10/08
Cons: expensive

Pros: Premade box
Comment:
its a little expensive, but sweet cause its all an easy right out of the box install. Glad that swiftech created this little contraption so I didn't have too.
DaSb00ts@NCIX
Rating:

Review Date: 03/09/08
Cons: -Pricey

Pros: -Solid-Looks good
Comment:
Perfect for those who want to mount a radiator externally. Easy to install, easy to adjust and looks good. Assembly instructions could have been a bit clearer. The price is a little high, but quality isn't cheap!
George_V@NCIX
Rating:

Review Date: 02/01/08
Cons: Pricey

Pros: Design, pretty solid mount
Comment:
Good for when you want to mount your radiator to the outside of your case. At first look, it would look like it can't hold up my 3x120 radiator, but it does a great job. Ridiculously expensive considering its simplicity.
James_8970@NCIX
Rating:

Review Date: 01/22/08
Cons: -If you you are using 2 DVI ports, this doesn't raise the RAD far enough from the case to use the second DVI port on your GPU AND place a fan on the bottom of my PA 120.3. If you aren't planning on using 6 fans you will not encounter any problem.

Pros: -Clean look-Gets the job done
Comment:
Clean finish, great look. Sadely this + a fan doesn't move the RAD far enough from my case to enable me to use 6 fans and both DVI ports on a PA 120.3. Otherwise, thise was a great buy.
Carlos_T@NCIX
Rating:

Review Date: 01/18/08
Cons: none that I can see

Pros: Does what it does good!
Comment:
Good for mounting your radiator externally when room in the case is tight, its highly adjustable. The radiator is exposed directly to ambient air for better cooling.
Thomas_B@NCIX
Rating:

Review Date: 01/12/08
Cons: Over priced

Pros: Simple instalationWell consructed
Comment:
Good for mouting either a dual or single 120mm rad. Comes will all the mouting hardware you will need. The price is a little high but it saves time and it is also a quality product.
Robert_I@NCIX
Rating:

Review Date: 12/14/07
Cons: Instructions? What Instructions?Expensive considering all there is to it.

Pros: SturdyEasily installed
Comment:
Though a little on the pricey side, it does get the job done. And though it was easy to install, the instructions where horribly done, pretty much one picture and that's it, and in black and white to boot.
arcanic@NCIX
Rating:

Review Date: 09/03/07
Cons: none

Pros: ease of installation
Comment:
This mounting kit for external radiators makes external radiator mounting extremely easy. It may seem pricey for what amounts to a plastic box spacer and you could probably jerry rig something for your case for cheaper, but $18 is a small price to pay for the convenience of having a complete and well designed kit at your disposal.
Click Here Show More Product Reviews

Product Features

Product Specifications

Model
BrandSwiftech
ModelMCB-120 "Radbox"
Spec
Compatibility"Radbox" housing, retention hardware
Features
Features2 parts construction: holding plate and housing for ease of installation Multiple slots for vertical and horizontal adjustments Bolts directly to 60mm, 80mm, 92mm or 120mm fan holes Custom pass-thru PCI bracket and adapters for 1/2" OD tubing (3/8" ID), designed for use with either quick-connect or conventional fittings such as worm-drive clamps included with kit.
Package Contents
Package ContentsRadiatorBracketHose ClampsBolts
Manufacturer Warranty
Parts1 year
Labor1 year

Similar Products

PriceBat.ca is 100% Canadian Own premier price comparison shopping site. Easy to search & compare prices of computer products, electronics and games at Canada online stores.