Product ReviewsSwiftech MCP655-B 12V Industrial Water Cooling Pump *Without Speed Adjustment* 1/2" Barbs
|
75%
25%
0%
0%
0%
|
With 24 User Reviews
|
 Rating: Review Date: 02/09/14  |
Cons: Mine came without foam anti vibration pad and screws.
Pros: Good price on sale. Comes with RPM sensor. Built in barb. Runs quite and very strong. Even runs upside down |
|
Rating: Review Date: 08/23/13 |
Cons: - none
Pros: - pushes a lot of water Comment:
Bought this for my first water cooling loop and I have no regrets whatsoever |
|
Rating: Review Date: 04/24/13 |
Cons: 1/2 fittings
Pros: Very good build qualityQuietNot too big Comment:
I would but this over any other pump. |
|
Rating: Review Date: 04/15/13 |
Cons: none but pricematch
Pros: great pump good price Comment:
great pumping power. compared to varible speed this ones runs about speed setting #4 almost silent and moves a lot of water. save some money if you don't need adjustable speed. replacement pump tops also improve performance dramaticaly |
|
Rating: Review Date: 02/14/13 |
Cons: None
Pros: Works great. Silent. Fairly easy to install Comment:
his pump has worked out great for me. It is cheaper than the one with speed adjustment so I figured the trade off would be a higher noise level but it is silent! I can't see any reason to run a pump at a lower speed unless it was noise level so I'd certainly recomend you save a few bucks and get this model.I mouned this on the bottom of my case and I needed to drill out a couple holes to mount it but it was not at all difficult to mount this.Highly recommended! |
|
Rating: Review Date: 12/20/12 |
Cons: None so far
Pros: Very quiet and powerful. Comment:
More than adequate for a single loop with one water block and a 220 radiator. |
|
Rating: Review Date: 10/02/10 |
Cons:
nothing.
Pros: Powerfull pump. Comment:
I own 2 of these in series for safety. Its pumping water trough 4 blocks without issue. You cant go wrong with these pump. Apogee GTZ/MCW80/MCW30/MCW80. |
|
Rating: Review Date: 09/24/10 |
Cons:
no speed controller
Pros: 1/4g Ready, Comment:
This pump rung great, the main problem is compare to the other MCP655, this one does not had a speed controller. Just a bit harder to fill the loop, but work great if you don't need to lower the pump speed. |
|
Rating: Review Date: 09/20/09 |
Cons: None
Pros: Low noiseStrong pump Comment:
Great pump. I chose this one over the regular version with speed control because it's pretty silent anyway, so not much use in speed control. This is a strong pump, it runs through all my stuff just fine. |
|
Rating: Review Date: 07/20/09 |
Cons: Looks abit bulky.
Pros: Powerful and quiet. Comment:
Powerful pump, the noised shocked me at first, its so loud, however its so quiet, close to silent after the bleeding, running my cpu+gpu setup with no problem! |
|
Rating: Review Date: 01/13/09 |
Cons: -Barbs for the intake/outbound could be a little better designed.
Pros: -Decent strength.-Good power cable length.-Quiet. Comment:
I'm quite happy with this pump for my WC loop. While running fairly silent, it still moves a respectable amount of water. The length of cable to provide the unit power is quiet adequate, letting you keep this fairly hidden and is convenient for cable management junkies like myself.I do somewhat wish that the intake/outbound barbs could be a better design. 1/2 probably fits easily over but 7/16" ID is quite a pain to get on. |
|
Rating: Review Date: 09/02/08 |
Cons: Non-variable like the MCP655
Pros: Great power/flowSilent operationIncludes good mounting hardware Comment:
Excellent pump. It is working well in mys system, which includes a rather long loop like this:Pump -> 120.3 rad -> CPU block -> NB block -> 120.2 rad -> GPU block -> GPU block -> ResThe flow is excellent. And, since I've mounted it using the Pts Petra Gell Stuff, it is completely silent (my Res makes a slight sound - like a soothing bubbling brook). I bought the non-variable model because I had no intention of reducing my flow, and I was under the impression that the non-variable model would run consistently at 100% flow. I have since been informed by Apollo4g that the non-variable model has an extra gear, enabling it to run at slightly higher flow than this one when at 100%. So I guess there is an argument to be made for getting the non-variable version, but honestly, considering the performance I am getting out of the MCP-655B, I am very pleased with the purchase. |
|
Rating: Review Date: 08/24/08 |
Cons: none
Pros: powernoiseperformancelooks Comment:
even tho its without speed adjustment, its silent at max speed. this pump is also very strong, great for high performance but restrictive blocks. cheers. |
|
Rating: Review Date: 06/19/08 |
Cons: big
Pros: good, strong failry quite Comment:
This pump is awsome, no comaplints run ym loop perfectly and can barley hear it. If you need a pump get this one. |
|
Rating: Review Date: 06/03/08 |
Cons: none
Pros: great power, quiet, sturdy. Comment:
great pump. a little cheaper because it doesnt have the speed adjustment, but its super quiet none the less. awesome. |
|
Rating: Review Date: 04/18/08 |
Cons: none
Pros: Price, look, powerfl, reliable Comment:
This pump is extremely powerful. the liquid in my water cooling system's goin real fast now. I've also red they're very reliable as well.... awesome product............................... |
|
Rating: Review Date: 02/10/08 |
Cons: bulky
Pros: Quite, strong, ok priced Comment:
A great pump overall wit great head pressure and flow rate for a restrictive loop. The pump is well priced and comes with all the hardware, only downside is thats a little bulky. |
|
Rating: Review Date: 02/05/08 |
Cons: Not Quite.
Pros: Powerful pump. Comment:
This is an awesome pump. Great for a fairly restrictive system, or just a nice high flow system. If you want a quite pump, this pump isn't for you. I would have gotten the speed adjustable one, but I don't mind a bit of noise |
|
Rating: Review Date: 11/30/07 |
Cons: -No speed adjustment-Super tight fit for 7/16" tubing
Pros: -Great pump (superb GMP)-Super tight fit for 7/16" tubing Comment:
This is a great pump, saved me $$$, especially on sale! I highly recommend this pump to anyone planning on watercooling. |
|
Rating: Review Date: 11/22/07 |
Cons: none so far
Pros: Quietreliablegreat performancelong lifetime Comment:
Great pump. i would recomend this to anyone building a water cooling system, quiet, long lifetime, and good performance. this especialy goes well with Petras Gel stuff, i would highly recomend some of that stuff, its excelent vibration absorber. |
|
Rating: Review Date: 11/08/07 |
Cons: Just the price, they really are over priced for any small water pump.
Pros: Very strong and silent. Even at full tilt Comment:
The mcp655-b is a great pump that does what it is supposed to and does it very quietly.I will buy again. |
|
Rating: Review Date: 10/26/07 |
Cons: None, even with no speed adjustment
Pros: High flow rateQuiet Comment:
Would have never used the speed adjustment as I want full performance from this quiet beast. Did I mention it is quiet?Manages to have a high flow rate with EK water block for my 8800GTX and Swiftech Apogee GTX block and Black ice 120x2 rad attached. This review was modfied by poster @ 10-26-07 12:58 AM |
|
Rating: Review Date: 09/03/07 |
Cons: Fixed barb fittings
Pros: Top quality, really quiet pump Comment:
Bought this as part of my upgraded water cooling setup, it replaced my Bigwater system.The size of the pump was easy to accomodate inside the Armor case, it was more of a challage to get the tubing to bend enough to fit it all inside the case.Over all temps of my 2 8800 cards and AMD cpu dropped, and are more stable under load.last I is a really quiet pump. no need to worry about that, and no reall need for the Speed Controled version of this pump. |
|
Rating: Review Date: 08/16/07 |
Cons: None
Pros: Works great. Silent. Fairly easy to install Comment:
This pump has worked out great for me. It is cheaper than the one with speed adjustment so I figured the trade off would be a higher noise level but it is silent! I can't see any reason to run a pump at a lower speed unless it was noise level so I'd certainly recomend you save a few bucks and get this model. I mouned this on the bottom of my case and I needed to drill out a couple holes to mount it but it was not at all difficult to mount this. Highly recommended! |
Using them to make more stable temps by connect 2 water cooling loops together with computers 8 feet apart. Still very good flow. Would recommend to anyone. Same motor as a D5 pump. And a lot of optional acessories for a customized look.