VPN: PC-A06FB
Product ReviewsLIAN LI PC-A06FB Black Computer Case
|
40%
10%
0%
30%
20%
|
With 10 User Reviews
|
 Rating: Review Date: 03/07/13 |
|
|
Rating: Review Date: 02/16/13 |
Comment:
- Lian Li Prestige- Quite Really light- Exceptional Cooling My typical size power provide hangs out the back of the case farther than J-Lo's funds maker. Seriously Lian Li? Seriously? OK so I've built no significantly less than 50 PCs because the 90s for myself and pals and a stint as an installer in a neighborhood laptop shop. In no way in my life have I observed a case that EXPECTS you to hang the energy supply out the back of the case three" and provides the components to do it. For ten years I've wanted a Lian Li case for their superb reputation. In no way again Lian Li. In no way once again.How I bought this case without having reading the evaluations is a question I'm asking myself now. All the reviewers below are correct. This is a horrible HORRIBLE design and style.I swear this factor reminds me of a window air conditioner unit hanging out of a trailer. Boy do I really feel classy. At least it was on sale. |
|
Rating: Review Date: 01/13/13 |
Comment:
Very good size midtower. Will fit a complete size power provide all the way in case if working with stock cooler. ( I was concerned about obtaining power supply hanging out the back of case)Very light, and excellent cooling. aluminum seems alot thinner than my lian li pc-v1100, but this case was half the cost. with a small preparing, you can route all the cables out of sight. Tends to make for a extremely tidy case. I would definately acquire this case again. |
|
Rating: Review Date: 10/27/12 |
Comment:
It's a Lian-Li What the heck was LianLi thinking right here? The Power supply mounts on the outside of the case? Why spend the cash on an eye-catching case if they go and do anything like that? Beware - I doubt you'll be able to fit a 120mm heatsink on the approach when the PS is in spot. I can't get past the power provide mounting position. |
|
Rating: Review Date: 09/08/12 |
Comment:
• Particularly light weight!• Brief situation will accommodate huge energy supplies and major motherboards.• 140mm fan in front, 120mm fan up top.• HDD have mounting technique that cuts down on vibration and noise. There seriously aren't any. The install went extremely smoothly with out a hitch. It even included a tool to make it less complicated. I constructed a Computer for a buddy in this case. I connected both fans to the Asus motherboard and enabled Q Fan. They inform me it's strange due to the fact now they can't inform when the Pc is on unless they go in the room at look at it. With all the components inside of this case it is nonetheless the lightest factor I've ever dealt with. Very great.I'm pleased about this, but some may well not be. The fan in the front is a clear 140mm fan, but it did not light up. I assume it's as well gimmicky, but some could in fact want that. |
|
Rating: Review Date: 01/24/12 |
Comment:
From the outside its your typical Lian Li clean looks and high quality create material, this mostly continues on the inside too but there are some troubles (see cons).Cooling is very good with 1 140mm intake fan and 1 120mm exhaust.Its a short full ATX case which is a neat thought and its completed through a cleaver PSU mounting technique. It has some draw backs but I didn't seriously have any key problems with it.Soft mounting for the case fans and difficult drives like all the newer Lian Lis. And yes this tends to make a large difference for rather machine. BE Conscious OF PSU Place Just before YOU Acquire!!Very first the PSU mounting is odd and dose crowd the CPU HS/F area. Largely I was fine with it but you'll want to be aware of it and select your HS/F accordingly (low profile Zalman 8700NT fits fine). I'm taking off a single egg right here.Brief cables. The USB header would only reach the nearest USB port with any amount of reasonable slack and the HD audio cable would not reach at all on my Asus M4A87TD-EVO. 1 - two inches would have made all the distinction, -1 egg.Blue LED intake fan; for me this a negative but I suppose its personal preference. At least its not too vibrant.The power button on mine is defective so its going back unless I can get a new button from Lian Li. Either way -1 egg for poor high quality control. Due to the short USB and audio port cables and odd PSU mounting I assume I will be avoiding this case in the future. |
|
Rating: Review Date: 01/15/12 |
Comment:
-High Top quality Finish looks and feels nice-Aluminum door more than external ports-Very quiet fans-Lightweight aluminum which may possibly also act as heatsink?-Nice HD and CD drive holders -Power supply sticks out the back and blocks the CPU fan-Finish scratches simple I really wanted a Lian Li case but can't rather discover the great 1Why can't they make one with only 3 external bays and 6+ internal bays? Also please put the power supply on the floor like the rest of the new situationsOverall it is a nice case with Lian Li quality but I docked 3 eggs for the horrible PSU mount |
|
Rating: Review Date: 10/26/11 |
Comment:
Looks clean and expert. Straightforward to install stuff. Dust filter is wonderful. 140mm fan is wonderful. Reasonable cost. Power supply is in the way, must use low profile cpu coolers. The finish scratches very easily. Stock coolers will fit. |
|
Rating: Review Date: 09/14/11 |
Comment:
This is an all aluminium ATX MINI-TOWER case as Lian-Li even states on their web page. exhaust fan on the top is 120mm and if it is like my lian-li, it has a slow spin rate and operates silently. The 140 on the front ought to be equally silent as properly as equipped with an air filter. Most of it is tool-less beauty designed by lian-li. They genuinely make quality goods and I have utilized numerous.The HDD bays are the exact same as the ones in my case and the rubber washers to mount the HDDs with are ingenious. They make the HDDs silent, but don't lose them, it would be complicated to mount the HDDs with out them. If you want to mount a enormous video card, this may well be an concern for you as it is a micro atx case and isn't designed for the highest finish cards out there. I would go with a geforce 210, 220, 230, or 240. Anything greater than that may possibly give you concerns in a tiny case. Okay, here's my beef with the timeset evaluation. The PSU can be mounted ENTIRELY OUTSIDE THE CASE, HALF-WAY, OR ENTIRELY INSIDE THE CASE (if your processor fan isn't enormous i.e. 120mm. Besides, who puts a 120mm PSU HS in a M-ATX case, its absurd? ). Shoppers, please visit the product internet site below. The advantages of having it out or portion-way out are in what size of hardware you have inside and if you want the PSU operating on cool air or helping the case vent out its warm air (the cooler air will improve the life of your PSU, but if you leave it in, then it increases the life of your other hardware by keeping them cooler). http://www.lian-li.com/v2/en/product/product06.php?pr_index&cl_indexɣ&sc_index&ss_index᠓&g=f |
|
Rating: Review Date: 07/28/11 |
Comment:
This case has wonderful characteristics and is incredibly attractive. Also particularly light weight and manufacturing seems solid. It's a mini tower, regardless of the item name and specifications. As of right now, the page still calls it a mid tower. If you're searching for a mini tower, this would almost certainly be a fantastic one. If you're looking for a mid tower, appear elsewhere. |
Smaller and lightweight. Holds a typical ATX motherboard and has 7 drive bays. Cooling is adequate for most elements, even when overclocked. Aftermarket CPU coolers will only match if the energy provide is mounted outdoors of the case. Beware of extra long graphics cards. At very first glance you could feel that the power provide fan may possibly conflict with the airflow to the CPU fan, but my elements run good and cool even when overclocked with a stock Intel CPU fan.In regards to graphics cards, there is a modest gap among the bottom drive bay and leading drive bay, developed for fitting longer cards with aftermarket HSF's. Most motherboards have a PCIe x1 slot at the leading, and then below it is the very first PCIe x16 slot. As extended as your card is installed in that slot and has an aftermarket HSF, you can potentially match even a Radeon 5970. Otherwise, this case will not match a stock graphics card that is longer than 280mm.