Location: Home > Electronics > Televisions > TV Accessories > Rosewill RMS-MT2790 Black 13" - 27" Tilt/Swivel Wall Mount

Rosewill RMS-MT2790 Black 13" - 27" Tilt/Swivel Wall Mount

Rosewill RMS-MT2790 Black 13" - 27" Tilt/Swivel Wall Mount (Rosewill: RMS-MT2790)
VPN: RMS-MT2790
Vendor: Rosewill
Price: $21.99 - $21.99 CAD from 1 stores
» Email this product to a friend   » Write a review
» Discuss on forum   » Post your deal
  Store Product Price  

Online
Rosewill RMS-MT2790 Silver 13" - 27" Tilt/Swivel Wall Mount
Newegg.ca - Once you know, you Newegg! 
$21.99 CAD Buy Now

Product Reviews

Rosewill RMS-MT2790 Black 13" - 27" Tilt/Swivel Wall Mount
72%
Excellent
10%
Very Good
7%
Average
7%
Below Average
3%
Poor
Rating: 8.83/10
Nishan
Rating:

Review Date: 06/20/13
Comment:
Uncomplicated, sturdy and installation is a snap None that I can assume of
Frye
Rating:

Review Date: 06/16/13
Comment:
Level built in, straightforward to mount and unmount monitor/tv/speaker/whatever. High excellent for a low price tag None I can feel of Utilized these to mount Polk Audio Monitor 30s for surround sound. Removed the stock mounting bracket and was capable to match two of the holes on these mounts without having getting to drill any much more holes. Worked wonderful, purchased these on sale so got a wonderful deal. In the future I may switch them and use them for monitors/TV/whatever, so the versatility is good.
Fraley
Rating:

Review Date: 06/07/13
Comment:
SturdyGood qualityStraightforward to install/use Needs to be tweaked a little bitOften it just falls down forward (My screen is only like 8 pounds, i have one particular of the thinnest led screens) I want I waited a small bit a lot more, I got it ŭ far more than what it is now..This is the two. wall mount i tried and I'm really happy.
Yakov
Rating:

Review Date: 03/30/13
Comment:
It was simple to connect to the Television and to the wall. Quite sturdy - I have no worry that the Television will fall. Extremely uncomplicated to take away from the wall if you require to for some purpose. none. Be confident to tighten the swivel points prior to you put the Television on the wall or you'll just have to take it off once again to do the tightening.
Phylicia
Rating:

Review Date: 03/02/13
Comment:
Does every little thing I would expect in such a mount at a considerably reduced cost than in retailers! My monitor is a 10 year old plasma that weighs about 25 pounds, so I had to tighten the screws to stop sagging. Not significantly to complain about. About 5 minutes, 6 screws, and done. The wall bracket comes with a constructed in Level for simple installation. It also has a small plastic clip that holds the monitor in place, which is great to toddler proof it from my twins.
Bowen
Rating:

Review Date: 02/23/13
Comment:
Operates best, gets screen off the wall which i needed it to do. Holds my 24 inch screen completely. None Newegg rocks
Derby
Rating:

Review Date: 02/20/13
Comment:
Appears Excellent, Great Capabilities Will Not Fit The TOSHIBA 26" 16ɍ 8ms 720p LCD HDTV 26AV502R53187833, not a excellent combo................ Manufacturer Response:Dear Customer, We apologize for the inconvenience, and will be far more than delighted to deal with this for you. Please make contact with rma@rosewill.com for replacement or full refund at our cost. We appear forward to hear from you.Very best Regards,Rosewill
Lanai
Rating:

Review Date: 01/18/13
Comment:
Extremely sturdy design for Rosewill. I like it extremely considerably if I had been mounting my 19" LCD on a wall. See Cons. Will not function with your 26" Television, got this as a combo with Auria 26" Tv and this mount is a MIS-D 75 Typical VESA mount. NEWEGG really should not advertise this mount with any 26" TVs that demand anything above MIS-D VESA Requirements Manufacturer Response:Dear Customer, We apologize for the inconvenience, and will be far more than happy to manage this for you. Please get in touch with rma@rosewill.com for replacement or full refund at our cost. We appear forward to hear from you.Very best Regards,Rosewill
Frederica
Rating:

Review Date: 01/07/13
Comment:
Bracket worked excellent on my 17'' monitor. Great price tag totally free shipping, yea! None
Isabis
Rating:

Review Date: 12/22/12
Comment:
Wonderful kit comes with some tools None
Braeden
Rating:

Review Date: 11/20/12
Comment:
Installation was fairly easy for the most part, just two large screws into the stud to mount the base, screw the VESA mount onto the monitor, then slide the plate onto the base. I'm a relative noob to household improvement but it was straightforward. Its extremely sturdy, supports my 24" widescreen LCD with out a hitch. When adjusted appropriately the swivel action is genuinely quite seamless but simultaneously stable. It does what it says quite nicely, specially for the price tag. The screws it came with didn't handle the power drill also properly. I got one particular of the two in but had to go to the hardware retailer for a additional hefty duty screw to finish installing it. If you are on a spending budget or don't require something fancy for a smaller sized LCD mount, this is an excellent purchase.
Gaynell
Rating:

Review Date: 10/20/12
Comment:
Ideal fit with my 23" Samsung monitor. Simple installation, and properly constructed! None. Rapid shipping as usual!
Duscha
Rating:

Review Date: 08/31/12
Comment:
Appears to be adequate per specs and images, and spec says it handles Each 75mm and 100mm VESA mounting points.From specifications:"VESA Compatible VESA 75, VESA 100"Yet early reviewer stated it handles ONLY 75mm VESA.The images show extremely obviously two sets of VESA mount holes, which suggests it does support Both 75mm AND 100mm VESA mounting points. Does it in fact support 100mm VESA mounting points or not? Does it in reality assistance 100mm VESA mounting points or not?
Elysia
Rating:

Review Date: 08/27/12
Comment:
mounts simply, all metal, has built in leveler, several possible angles. does make the Television stick out nearly a foot from the wall. I wish it had a swift release to adjust the angle. just about best. but like I stated in the cons, demands to be made a lot more compact
Natan
Rating:

Review Date: 08/08/12
Comment:
Really properly constructed. None so far I mounted a 23" flat panel monitor utilizing this bracket, overall a very nicely assembled mount.
Hardy
Rating:

Review Date: 06/10/12
Comment:
Holds my 23" screen nicely and specifically exactly where I want it to. Stripped out and sheered mounting screws. I had to get diverse ones. Probably not the screws fault, just some really hard wood I was mounting it to. Thus, nonetheless 5 eggs.
Stan
Rating:

Review Date: 03/24/12
Comment:
Easy to mount, Built-in level, Separates for simple attachment Cheap screws This mount functions good for holding my 24" Tv to the wall. The mount is separated into two pieces to permit for uncomplicated mounting of 1 side to the wall and the other to the Tv. The pieces slide together and are held by gravity and a set screw.This also has the ideal idea ever, a built-in bubble level.
Drucilla
Rating:

Review Date: 03/20/12
Comment:
Affordable, straightforward to mount, built in levelDoes the job, holds well but pivots/tilts easily. didn't fit the pattern on my lg 26" lcd television, but my fault for not checking ahead of time. somthing tells me lg makes use of a atypical mount pattern. oh, well, i drilled teh back of the tv and bolted it in. :)
America
Rating:

Review Date: 03/01/12
Comment:
Allows you to mount and tilt monitors on wall studs that are broadly spaced. The built-in level is good but gimmicky. I bought two of these on sale. All 4 mounting screws stripped just halfway into the wall and I even had to use a ratchet wrench to eliminate one particular of them. Fortunately, I had my own screws which worked fine. The ball and socket mechanism slips more than time, requiring occcasional repositioning and tightening. This needs you to reach over the top rated of the monitor with a hex wrench - not the easiest for massive monitors behind a significant desk. This is a mediocre product, therefore the mediocre rating. I got these to replace some non-tile wallmounts. Whilst it's nice to be able to see my second monitor greater, I'm not positive it was worth the expense and the hassle.
Terrel
Rating:

Review Date: 02/08/12
Comment:
Size. Value. Vesa mount. Straightforward mounting. none Does the job to hook up a 26'' Asus monitor on the wall.
Esma
Rating:

Review Date: 01/18/12
Comment:
Truly easy install. four screws to back of monitor, two into wall. wall bracket has built in level. One bracket slides appropriate into the otherGot it up in much less than five minutes. Initially had sag on the ball joint. No directions, but you get an allen wrench to tighten three screws on leading of mount and it fixes the dilemma. suggest tightening that just before putting television/monitor into location, but either way it's simple Great deal for a mount, nice and compact. Thinking of receiving an additional to replace a tilt only mount I have.
Cian
Rating:

Review Date: 01/13/12
Comment:
Works exactly as described, study VESA 100 mount for 26 inch LCD tv/dvd combo Big lag screws are low-cost, plan on trip to hardware store to acquire screws that wont strip when driven into wall studs...even pre-drilled and phillips heads nevertheless stripped.
Winslow
Rating:

Review Date: 01/12/12
Comment:
low cost, easy to install, quickly adjusted slight slippage
Jaime
Rating:

Review Date: 11/13/11
Comment:
Great mount, incredibly flexible in that it uses a "ball and socket" style for the tilt, which also allows for you to rotate the Television/monitor clockwise or counter clockwise if you don't get the base mounted to the wall exactly level. Really, if you disconnect the cables from the Tv/monitor you can spin the Television/monitor about 360 degrees on this mount. With this mount, its doable to watch the Television/monitor upside down or on its side. This is not a con against the mount itself, but since its so flexible, able to spin clockwise/counter clockwise, you have to eyeball the level of the Tv/monitor each and every time you adjust it. If you are one of those folks that has OCD and walks about your property with a carpenter's level producing confident all the photos hanging on the wall are level, then this mount may not be for you, mainly because every time you adjust the monitor tilt, it knocks the Television/monitor out of level. Its not a major deal for me, I just eyeball it employing some marks on the wall behind it, and rotate the Television/monitor till it looks level once more. This would be a great (cheap) mount for anyone who does desktop publishing, considering that those guys will need a wide-screen monitor turned 90 degrees on its side so they can view much more of the page at a time. This mount quickly spins clockwise or counter clockwise, whichever you prefer. Also don\'t forget to use the allen wrench to adjust the tension on that "ball and socket" joint, or your Television/monitor may possibly droop if there is any vibration on the wall it is mounted to. There is a hallway on the other side of the wall where my monitor is mounted, and the floor is kind of bouncy in this older home, which makes the wall slightly move when anybody walks down the hallway... so the very first couple of days the monitor would droop following a few hours, till I tightened up the adjustment screws a bit, now its fine. Be positive to adjust each screw the same number of turns, to preserve the pressure the identical all the way about the ball-and-socket.
Palesa
Rating:

Review Date: 10/25/11
Comment:
Basic, sturdy and installation is a snap na
Click Here Show More Product Reviews

Product Features

Product Specifications

General
Brand Rosewill
Model RMS-MT2790
Name Tilt/Swivel Wall Mount
Spec
Mount Style Wall
Color Black
Movable Tilt Range: +13.8° to -13.8°

Swivel Range: 35° left to 35° right
TV Size Capacity 13" - 27"
TV Weight Capacity Max. load 44 lbs.
VESA Compatible VESA 75, VESA 100
Cable Management Yes
Feature
Feature Designed to fit most 13" to 27" flat-panel screens

Tilt and swivel ensure the optimum viewing angle

Solid aluminum alloy construction

Integrated bubble level

Quick and easy installation

VESA 75 and 100 compatible

One-touch tilt adjustment - no knobs to loosen

Fully rotatable (landscape to portrait)

Hardware for wood stud or concrete installation

Profile Range: 3.7"
Dimensions&Weight
Height 7.01"
Width 5.04"
Depth 3.62"
Weight 1.76 lbs.
Manufacturer Warranty
Parts 1 year limited
Labor 1 year limited

Similar Products

PriceBat.ca is 100% Canadian Own premier price comparison shopping site. Easy to search & compare prices of computer products, electronics and games at Canada online stores.