StarTech.com 2.5in USB 3.0 External SATA III SSD Hard Drive Enclosure w/ UASP Portable External HDD
VPN: S2510BPU33
Vendor: StarTech.com
Price: $24.99 - $40.57 CAD from 3 stores
» Email this product to a friend
» Write a review
» Discuss on forum » Post your deal
Vendor: StarTech.com
Price: $24.99 - $40.57 CAD from 3 stores
» Discuss on forum » Post your deal
Product Features
Turn a 2.5" SATA Hard Drive or Solid State Drive into a UASP supported USB 3.0 External Hard Drive. The S2510BPU33 USB 3.0 Hard Drive Enclosure with UASP lets you connect a 2.5in SATA III hard drive (HDD) or solid state drive (SSD) through an available USB port. The enclosure delivers optimal performance with a USB 3.0 connection, but is backward compatible with USB 2.0/1.1 host connections as well.
Enhanced with UASP (USB Attached SCSI Protocol), this 2.5" SATA III enclosure performs up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. Using a more efficient protocol than the traditional USB BOT (Bulk-Only Transport), UASP reduces latency, significantly increasing transfer speeds and reducing processor usage to utilize the full potential of your SATA III hard drives.
With support for SATA I/II/III, and large capacity drives (tested up to 1TB) this HDD enclosure is compatible with virtually any 2.5in SATA hard drive, and greatly increases the storage/backup capabilities of your computer.
For added portability the USB 3.0/SATA III enclosure features tool-less HDD installation, and requires no external power adapter.
UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing UASP also shows an 80% reduction in required processor resources.
Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled StarTech.com Enclosure, and a SATA III solid state drive.
Device Type: Storage enclosure - external
Hard Drive Form Factor Compatibility: 2.5"
Hard Drive Maximum Height: 9.5 mm
Host Bus: USB 3.0
Product Material: Plastic
Color: Black
Storage Controller
Interface: SATA 6Gb/s
Data Transfer Rate: 5 GBps
Supported Devices: Hard drive
Max Storage Devices Qty: 1
Expansion / Connectivity
Bays: 1 x internal - 2.5"
Interfaces: 1 x SATA 6Gb/s - 22 pin Serial ATA
Connections: 1 x USB 3.0 - 10 pin Micro-USB Type B
Miscellaneous
Included Accessories: HDD pad
Cables Included: 1 x USB cable - external - 1.5 ft
Features: USB powered, LED indicator
Compliant Standards: RoHS
Power
Power Source: USB bus
Software / System Requirements
OS Required: Linux, Apple MacOS X, Microsoft Windows Server 2008 R2, Microsoft Windows Vista (32/64 bits), Microsoft Windows 7 (32/64 bits), Microsoft Windows XP (32/64 bits), Microsoft Windows Server 2003 (32/64-bits), Windows 8 (32/64 bits)
Manufacturer Warranty
Service & Support: 2 years warranty
Service & Support Details: Limited warranty - 2 years
Dimensions & Weight
Width: 3.5 in
Depth: 5.2 in
Height: 0.6 in
Weight: 2.5 oz
Environmental Parameters
Humidity Range Operating: 10 - 90%
Enhanced with UASP (USB Attached SCSI Protocol), this 2.5" SATA III enclosure performs up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. Using a more efficient protocol than the traditional USB BOT (Bulk-Only Transport), UASP reduces latency, significantly increasing transfer speeds and reducing processor usage to utilize the full potential of your SATA III hard drives.
With support for SATA I/II/III, and large capacity drives (tested up to 1TB) this HDD enclosure is compatible with virtually any 2.5in SATA hard drive, and greatly increases the storage/backup capabilities of your computer.
For added portability the USB 3.0/SATA III enclosure features tool-less HDD installation, and requires no external power adapter.
UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing UASP also shows an 80% reduction in required processor resources.
Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled StarTech.com Enclosure, and a SATA III solid state drive.
Specifications
GeneralDevice Type: Storage enclosure - external
Hard Drive Form Factor Compatibility: 2.5"
Hard Drive Maximum Height: 9.5 mm
Host Bus: USB 3.0
Product Material: Plastic
Color: Black
Storage Controller
Interface: SATA 6Gb/s
Data Transfer Rate: 5 GBps
Supported Devices: Hard drive
Max Storage Devices Qty: 1
Expansion / Connectivity
Bays: 1 x internal - 2.5"
Interfaces: 1 x SATA 6Gb/s - 22 pin Serial ATA
Connections: 1 x USB 3.0 - 10 pin Micro-USB Type B
Miscellaneous
Included Accessories: HDD pad
Cables Included: 1 x USB cable - external - 1.5 ft
Features: USB powered, LED indicator
Compliant Standards: RoHS
Power
Power Source: USB bus
Software / System Requirements
OS Required: Linux, Apple MacOS X, Microsoft Windows Server 2008 R2, Microsoft Windows Vista (32/64 bits), Microsoft Windows 7 (32/64 bits), Microsoft Windows XP (32/64 bits), Microsoft Windows Server 2003 (32/64-bits), Windows 8 (32/64 bits)
Manufacturer Warranty
Service & Support: 2 years warranty
Service & Support Details: Limited warranty - 2 years
Dimensions & Weight
Width: 3.5 in
Depth: 5.2 in
Height: 0.6 in
Weight: 2.5 oz
Environmental Parameters
Humidity Range Operating: 10 - 90%
Product Specifications
Model | ||
Brand | StarTech | |
Model | S2510BPU33 | |
Spec | ||
Color | Black | |
Size | 2.5" | |
AC Adapter | No | |
Material | Plastic | |
Internal Interface | SATA III | |
External Interface | USB 3.0 | |
Maximum Capacity (per Bay) | Up to 1TB | |
Fan | No | |
Specifications | Chipset ID: ASMedia - ASM1053 Connector: Drive Connectors: 1 - SATA Data & Power Combo (7+15 pin) Host Connectors: 1 - USB 3.0 Micro-B (10 pin; SuperSpeed) UASP Support: Yes USB-Powered *Currently tested with up to 1TB 5400 RPM hard drives. | |
Features | Compliant with USB Attached SCSI Protocol (UASP) Transport Specifications Compatible with SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives Tool-less installation Powered directly from the USB port SuperSpeed USB 3.0 compliant host interface supporting data transfer rates up to 5Gbps High Speed USB 2.0 compliant host interface, with transfer rates up to 480Mbps Power/Activity LED indicator Plug-and-Play and Hot-Swap compatible. | |
Compatibility | ||
Operating Systems Supported | Windows XP (32/64-bit)/ Server 2003 (32/64-bit)/ Server 2008 R2/ Vista (32/64-bit)/ 7 (32/64-bit)/ 8 (32/64-bit) Mac OS X Linux | |
Dimensions & Weight | ||
Dimensions | 5.2" x 3.5" x 0.6" | |
Weight | 2.5 oz [70.1 g] | |
Packaging | ||
Package Contents | 1 - 2.5" USB 3.0 to SATA III HDD Enclosure 1 - HDD Pad 1 - 18" USB 3.0 Cable 1 - Product Manual |