TRIPP LITE SMART5000RT3U 5000 VA 4000 Watts 10 x NEMA 5-15R, 2 x NEMA 5-20R, 1 x NEMA L6-30R, 1 x NEMA L14-30R Outlets SmartPro Expandable Rack/Tower UPS System
VPN: SMART5000RT3U
Vendor: Tripp Lite
Price: $0.00 - $0.00 CAD from 0 stores » Email this product to a friend » Write a review
» Discuss on forum » Post your deal
Vendor: Tripp Lite
Price: $0.00 - $0.00 CAD from 0 stores » Email this product to a friend » Write a review
» Discuss on forum » Post your deal
Product Specifications
Model | |
Brand | TRIPP LITE |
Model | SMART5000RT3U |
Input | |
Input Voltage Range | 208V |
Input Frequency | 60 Hz |
Output | |
VA Rating | 5000 VA |
Watts | 4000 Watts |
Output Voltage | 208V & 120V |
Outlets | 10 x NEMA 5-15R, 2 x NEMA 5-20R, 1 x NEMA L6-30R, 1 x NEMA L14-30R |
Battery | |
Battery Run Time | Full load runtime: 16 min. (5000VA), add 1 BP48V60RT3U for 38 min. Half load runtime: 38 min. (2500VA), add 1 BP48V60RT3U for 86 min. |
Battery Recharge Time | 2-4 hours to 90% |
Spec | |
Interface Port | RS-232, USB |
Management Software | YES |
Approvals | UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico) |
Surge Protection | |
Surge Energy Rating | 1020 joules |
Physical Spec | |
Rackmountable | Yes |
Weight | Power Module: 93 lbs. / Battery pack: 135 lbs. |
Dimensions | Power Module 5.25" x 17.5" x 22.5"Battery Pack 5.25 "x 17.5" x 22.75" |
Features | |
Features | Large 5000VA/4000W output capacity with full-time sine wave output offers guaranteed compatibility with all equipment types High power density 5kVA power module and battery pack occupy only 3 rack spaces (3U) each (UPS and battery pack require 6U total installed) 38 min. half load runtime, expandable with multiple external battery packs (part# BP48V60RT3U) Line-interactive voltage regulation corrects severe brownouts and overvoltages without using battery power Dual voltage output is simultaneously compatible with both 208V and 120V equipment 14 total outlets (120V: 10 x 5-15R, 2 x 5-20R / 208V: 1 x L6-30R, 1 x L14-30R) Diagnostic LEDs provide visual indication of 17 separate performance conditions Included PowerAlert Software provides e-mail notification of power problems and simultaneous automatic unattended shutdown of multiple servers 4 built-in communications ports (2 x DB9, 2 x USB) for remote monitoring and unattended shutdown Slot for SNMP/web card SNMPWEBCARD and environmental sensor ENVIROSENSE for remote communications in large IP environments 8 customized load management receptacles can be individually powered off and back on again via software interface to reboot remote equipment or perform "load shedding" of less critical loads to extend battery runtime for the most critical equipment Emergency Power Off (EPO) interface for emergency shutoff in large facilities Hot-swappable/user replaceable batteries allow on-site battery replacement through the front panel without powering off connected equipment or removing the UPS from the rack |