Product ReviewsThermaltake WingRS VG1000BNS Black SECC ATX Mid Tower Computer Case - Retail
|
20%
50%
20%
10%
0%
|
With 10 User Reviews
|
 Rating: Review Date: 05/29/09  |
Cons: Difficult to close side panels
Pros: SimpleKeeps Noise LowLooks Good |
|
Rating: Review Date: 05/03/09 |
Cons: Cramped in areas/fitting issues, not strong metal
Pros: Looks nice, screwless, front ports Comment:
It's good overall. It's cheap so I can't really complain. I might be worried about cpu heatsinks, as mine is quite close to the exhaust fan. The other issue is the exhaust fan area didn't fit my other 120mm fan so I had to put it in the front. Plus my mobo I/o didnt fit with a panel cover attached, so I had to take it out. |
|
Rating: Review Date: 02/28/09 |
Cons: The mobo shield is soldered on to the back, so you might warp things taking it off. While the ODD and HDD bays are tool-less, that really doesn't secure them. To keep everything securely in place, I think screws should be put in on both sides anyways.
Pros: Adequate room to work in, not gaudy but not ugly simple either, light, and sturdy enough. Cheap. Comment:
I bought this case for a cheap build for my parents. They like how it looks, it had enough room for everything, and was pretty easy to install. The included fan is quiet enough. 2 things I would change is have the back pci slot plates screwed in instead of soldered in. Also, in the front panel, have the i/o wires attached to the frame as opposed to the front cover, when you try to remove that, all the wires want to go with it. Other than that though, great case for the money. |
|
Rating: Review Date: 02/05/09 |
Cons: Case fan has to be unscrewed a bit to remove or install the backplate as it is somewhat in the way. As with most glossy cases, handling it tends to leave smudges.
Pros: Great looks, great price, screwless side panel (main side). Screwless drive bays. Roomy. Great value. Large non-noisy case fan. Comment:
I've bought a few of these. Although a bit more expensive than some other cases I've been using they are definitely better looking and easy to work with. I especially like the glossy look. It really is appealing. The other cases I use look somewhat plain in comparison. Comes with a large case fan which isn't noisy. Had to unscrew the fan to insert the proper backplate however as the fan overlaps the backplate a bit. Screwless design makes it a breeze to work with. |
|
Rating: Review Date: 11/23/08 |
Cons: Very small restart button have to use a pencil to press it120MM molex connector is cheap
Pros: Good and elegent for the price Comment:
The case was Screwless and it was very easy to understand and install a complete pc setup in itThe molex connector for the 120MM wouldn't fit in the molex of the psu so I had to get the pin out of the and put electric tape on for the nude pins to stay in the psu molexOverall a good case |
|
Rating: Review Date: 08/04/08 |
Cons: Not as durable as I thought it would be, the HDD isn't snug enough for my tastes so I had to mod it to fit perfectly. Airflow is not the best.
Pros: Looks nice and shiny, price was good Comment:
This is a good case. The design of the trays and the expansion slot area is tool less which helps with a speedy assembly. I don't like my HDD was able to move a bit and had to mod it with a piece of rubber to keep it snug. The airflow is not very good, especially sense I use and AC pro that I placed to face the back. I will have to cut a hole at the top to improve airflow and reduce my highish temps (45 C idle) on E2200 cpu.I like the look of the case because of the shine. The rest of the case looks a little unless I ever decide to cut a hole on the side. |
|
Rating: Review Date: 06/07/08 |
Cons: none
Pros: Easy to work withCheap Comment:
Very good cheap case. Holds everything fine. Came with fan but I didnt use it. Would buy again if needed a case for a cheap build with no PSU. |
|
Rating: Review Date: 03/13/08 |
Cons: None
Pros: Very easy to work with and looks great. Also it's cheap. Comment:
I would definetly buy this case again. It's easy to work with, looks nice and was on sale for a great price. |
|
Rating: Review Date: 01/17/08 |
Cons: Metal is a little thin in placesFront area for 120mm fan is a bit small and hard to get a fan into.
Pros: Almost %100 tool free120mm fan includedFairly easy to work inside Comment:
Using with a Gigabyte GA-P35 board and an 8800GT. Everything fit without issue so far.The rear 120mm fan is mounted to a release bracket and not to the case itself, which looks like it will cause clearance issues with many CPU coolers with my board as it barely misses the stock Intel cooler. The front fan was a tight fit to get in, but could have been worse.I would recommend this case for a basic tower unit but not one for someone looking to add much cooling or drives. |
|
Rating: Review Date: 09/01/07 |
Cons: Pas de prise firewire sur le devant.
Pros: Superbe boîtier. Comment:
Boîtier de bonne construction et avec un très beau look. Payé en spécial à $46 et considérant son superbe allure, c'est le meilleur boîtier que j'ai acheté si on considère en plus le prix payé pour. Vient avec un bon fan silencieux de 120mm à l'arrière et il y a de la place prévu pour recevoir un autre 120mm sur le devant. Le duck d'entré d'air vers le CPU sur le coté est bien situé et est ajustable en profondeur. Son design ainsi que le finit noir piano sur le devant lui donne un look de toute beauté. Hautement recommandable pour tout PC qui se respecte sans besoin de prise firewire à l'avant. |
Just go this case with a system i prebuilt. No High Def front audio but if you don't care about just plugging in the back its good and simple.