Cisco Catalyst 2950 24PT 10/100-2 10
VPN: WS-C2950C-24Vendor: CISCO SYSTEMS
Price: $0.00 - $0.00 CAD from 0 stores » Email this product to a friend » Write a review
» Discuss on forum » Post your deal
What is on Ebay
Product Specifications
| Model | |
| Brand | CISCO |
| Model | WS-C2950C-24 |
| Spec | |
| Standards | IEEE 802.1x supportIEEE 802.1wIEEE 802.1sIEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T portsIEEE 802.1D Spanning-Tree ProtocolIEEE 802.1p class-of-service (CoS) prioritizationIEEE 802.1Q VLANIEEE 802.3 10BASE-T specificationIEEE 802.3u 100BASE-TX specificationIEEE 802.3ab 1000BASE-T specificationIEEE 802.3adIEEE 802.3z 1000BASE-X specificationRMON I and II standardsSNMPv1, SNMPv2c, SNMPv3 (planned future support for v3) |
| Ports | 24 10/100 portsTwo 100BASE-FX ports |
| Speed | 10/100Mbps |
| MAC Address Table | Up to 8000 |
| Buffer Memory | 8 MB memory architecture shared by all portsUp to 16 MB SDRAM and 8 MB Flash memory |
| Security | Filtering of incoming traffic flows based on Layer 2, Layer 3 or Layer 4 access control parameters (ACPs) prevents unauthorized data flows.The following Layer 2 ACPs or a combination can be used for security classification of incoming packets: source Media Access Control (MAC) address, destination MAC address, and 16-bit Ethertype.The following Layer 3 and Layer 4 fields or a combination can be used for security classification of incoming packets: source/destination IP address, TCP source/destination port number, User Datagram Protocol (UDP) source, or destination port number. ACLs can also be applied to filter based on DSCP values.Time-based ACLs allow configuration of differentiated services based on time-periods.Private VLAN edge provides security and isolation between ports on a switch, ensuring that voice traffic travels directly from its entry point to the aggregation device through a virtual path and cannot be directed to a different port.Support for the IEEE 802.1x standard allows users to be authenticated regardless of which LAN port they are accessing, and provides unique benefits to customers who have a large base of mobile (wireless) users accessing the network.SSHv2 and SNMPv3 provide network security by encrypting administrator traffic during Telnet and SNMP sessions.SSHv2 and the crypto version of SNMPv3 require a special crypto software image due to US export restrictions.Port Security and unicast MAC filtering secures the access to a port based on MAC addresses. The aging feature of port security removes the MAC address from the switch after a specific timeframe to allow another device to connect to the same port. Unicast MAC filtering allows non-IP packets to be filtered as well.MAC Address Notification allows administrators to be notified of new users added or removed from the network.Spanning-tree root guard (STRG) prevents edge devices not in the network administrator\'s control from becoming Spanning-Tree Protocol root n |
| Cabling | 10BASE-T ports: RJ-45 connectors; two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling100BASE-TX ports: RJ-45 connectors; two-pair Category 5 UTP cabling1000BASE-T ports: RJ-45 connectors; four-pair Category 5 UTP cabling100BASE-FX ports: MT-RJ connectors, 50/125 or 62.5/125 micron multimode fiber-optic cabling1000BASE-T, 1000BASE-SX, -LX/LH, -ZX GBIC-based ports: SC fiber connectors, single-mode or multimode fiberCISCO GigaStack GBIC ports: copper-based CISCO GigaStack cablingManagement console port: 8-pin RJ-45 connector, RJ-45-to-RJ-45 rollover cable with RJ-45-to-DB9 adapter for PC connections; for terminal connections, use RJ-45-to-DB25 female data-terminal-equipment (DTE) adapter (can be ordered separately from CISCO, part number ACS-DSBUASYN=) |
| LEDs | Per-port status LEDs: link integrity, disabled, activity, speed, and full-duplex indications.System status LEDs: system, RPS, and bandwidth utilization indications. |
| VLAN Support | Yes |
| Power | AC input voltage: 100 to 127, 200 to 240 VAC (autoranging)AC input frequency: 47 to 63 HzDC input voltages for Cisco RPS 675: +12V @ 4.5A |
| Temperature | 0ºC to 45ºC (32ºF to 113ºF) |
| Humidity | 10 to 85 percent (noncondensing) |
| Features | |
| Features | QoS Classification Support at IngressQoS Metering and Policing at IngressQoS Marking at IngressQoS Scheduling Support at EgressSophisticated Traffic |
