Cisco Switch 48 10/100 2pt Lan Base Image
VPN: WS-C2960-48TT-LVendor: Cisco Systems
Price: $0.00 - $0.00 CAD from 0 stores » Email this product to a friend » Write a review
» Discuss on forum » Post your deal
What is on Ebay
Product Features
Cisco 48-Port Network Switch with 2x 10/100/1000 Ports
Cisco® Catalyst® 2960 Series Intelligent Ethernet Switches are a new family of fixed-configuration standalone devices that provide desktop Fast Ethernet and Gigabit Ethernet connectivity, enabling enhanced LAN services for entry-level enterprise, mid-market, and branch office networks. The Catalyst 2960 Series offers integrated security, including network admission control (NAC), advanced quality of service (QoS), and resiliency to deliver intelligent services for the network edge.
The Cisco Catalyst 2960 Series software image is a rich suite of intelligent services, including advanced QoS, rate limiting, and ACLs. The SFP-based Gigabit Ethernet ports accommodate a range of SFP transceivers, including the Cisco 1000BASE-SX, 1000BASE-LX, 1000BASE-BX, 1000BASE-ZX, 100BASE-FX, 100BASE-LX, 100BASE-BX, and coarse wavelength-division multiplexing (CWDM) SFP transceivers.
Product Specifications
| Model | |
| Brand | CISCO |
| Series | Catalyst 2960 |
| Model | WS-C296048TT-L |
| Spec | |
| Standards | IEEE 802.1sIEEE 802.1wIEEE 802.1xIEEE 802.3adIEEE 802.3ah (100BASE-X single/multimode fiber only)IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T portsIEEE 802.1D Spanning Tree ProtocolIEEE 802.1p CoS PrioritizationIEEE 802.1Q VLANIEEE 802.3 10BASE-T specificationIEEE 802.3u 100BASE-TX specificationIEEE 802.3ab 1000BASE-T specificationIEEE 802.3z 1000BASE-X specification |
| Jumbo Frames | 9018 bytes |
| Ports | 48 Ethernet 10/100 ports and 2 10/100/1000TX Uplinks |
| Speed | 10/100Mbps Ports + 1000Mbps Uplinks |
| MAC Address Table | Up to 8000 |
| Buffer Memory | 64 MB DRAM32 MB flash memory |
| Security | IEEE 802.1x allows dynamic, port-based security, providing user authentication.IEEE 802.1x with VLAN assignment allows a dynamic VLAN assignment for a specific user regardless of where the user is connected.IEEE 802.1x with voice VLAN permits an IP phone to access the voice VLAN irrespective of the authorized or unauthorized state of the port.IEEE 802.1x and port security are provided to authenticate the port and manage network access for all MAC addresses, including those of the client.IEEE 802.1x with Guest VLAN allows guests without 802.1x clients to have limited network access on the guest VLAN.Port-based ACLs for Layer 2 interfaces allow application of security policies on individual switch ports.Unicast MAC filtering prevents the forwarding of any type of packet with a matching MAC address.Unknown unicast and multicast port blocking allows tight control by filtering packets that the switch has not already learned how to forward.SSHv2 and SNMPv3 provide network security by encrypting administrator traffic during Telnet and SNMP sessions. SSHv2 and the cryptographic version of SNMPv3 require a special cryptographic software image because of U.S. export restrictions.Bidirectional data support on the Switched Port Analyzer (SPAN) port allows the CISCO Secure intrusion detection system (IDS) to take action when an intruder is detected.TACACS+ and RADIUS authentication enable centralized control of the switch and restrict unauthorized users from altering the configuration.MAC address notification allows administrators to be notified of users added to or removed from the network.DHCP snooping allows administrators to ensure consistent mapping of IP to MAC addresses. This can be used to prevent attacks that attempt to poison the DHCP binding database, and to rate-limit the amount of DHCP traffic that enters a switch port. |
| Cabling | 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling1000BASE-T ports: RJ-45 connectors, four-pair Category 5 UTP cabling1000BASE-T SFP-based ports: RJ-45 connectors, four-pair Category 5 UTP cabling1000BASE-SX, -LX/LH, -ZX, -BX and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber)100BASE-LX, -BX, -FX: LC fiber connectors (single/multimode fiber) |
| LEDs | Per-port status: Link integrity, disabled, activity, speed, full-duplexSystem status: System, RPS, link status, link duplex, link speed |
| VLAN Support | Yes |
| Power | +12V at 5A |
| Dimensions | 17.5" x 9.3" x 1.7" |
| Weight | 8.0 lbs. |
| Temperature | 0ºC to 45ºC (32ºF to 113ºF) |
| Humidity | 10 to 85% (noncondensing) |
| Features | |
| Features | 1 RU fixed-configuration, multilayer switchEntry-level enterprise-class intelligent servicesLAN Base Image installedEase of Use and DeploymentSuperior Redundancy for Fault BackupAdvanced QoS |
| Packaging | |
| Package Contents | WS-C296048TT-LManualPower CordCableRack mount kit |
| Manufacturer Warranty | |
| Parts | 5 years limited |
| Labor | 5 years limited |
