Cisco Catalyst 3560 48-port 10/100/1000 with 4 SFP and Enhanced Multilayer software Image
VPN: WS-C3560G-48TS-EVendor: Cisco Systems
Price: $0.00 - $0.00 CAD from 0 stores » Email this product to a friend » Write a review
» Discuss on forum » Post your deal
What is on Ebay
Product Specifications
| Model | |
| Brand | CISCO |
| Model | WS-C3560G-48TS-E |
| Spec | |
| Standards | IEEE 802.1sIEEE 802.1wIEEE 802.1xIEEE 802.3adIEEE 802.3afIEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T portsIEEE 802.1D Spanning Tree ProtocolIEEE 802.1p CoS PrioritizationIEEE 802.1Q VLANIEEE 802.3 10BASE-T specificationIEEE 802.3u 100BASE-TX specificationIEEE 802.3ab 1000BASE-T specificationIEEE 802.3z 1000BASE-X specificationRMON I and II standardsSNMPv1, SNMPv2c, and SNMPv3 |
| Jumbo Frames | 9018 bytes (Jumbo frames), for bridging on Gigabit Ethernet ports, up to 1546 bytes for bridging of Multiprotocol Label Switching (MPLS) tagged frames on 10/100 ports |
| Ports | 48 Ethernet 10/100/1000 ports and 4 SFP-based Gigabit Ethernet ports |
| Speed | 10/100/1000Mbps |
| MAC Address Table | Up to 12,000 |
| Buffer Memory | 128 MB DRAM32 MB Flash memory |
| Security | IEEE 802.1x allows dynamic, port-based security, providing user authentication.IEEE 802.1x with VLAN assignment allows a dynamic VLAN assignment for a specific user regardless of where the user is connected.IEEE 802.1x with voice VLAN permits an IP phone to access the voice VLAN irrespective of the authorized or unauthorized state of the port.IEEE 802.1x and port security are provided to authenticate the port and manage network access for all MAC addresses, including those of the client.IEEE 802.1x with an ACL assignment allows for specific identity-based security policies regardless of where the user is connected.IEEE 802.1x with Guest VLAN allows guests without 802.1x clients to have limited network access on the guest VLAN.CISCO security VLAN ACLs (VACLs) on all VLANs prevent unauthorized data flows from being bridged within VLANs.CISCO standard and extended IP security router ACLs (RACLs) define security policies on routed interfaces for control- and data-plane traffic.Port-based ACLs (PACLs) for Layer 2 interfaces allow application of security policies on individual switch ports.Unicast MAC filtering prevents the forwarding of any type of packet with a matching MAC address.Unknown unicast and multicast port blocking allows tight control by filtering packets that the switch has not already learned how to forward.SSHv2, Kerberos, and SNMPv3 provide network security by encrypting administrator traffic during Telnet and SNMP sessions. SSHv2, Kerberos, and the cryptographic version of SNMPv3 require a special cryptographic software image because of U.S. export restrictions.Private VLAN provides security and isolation between switch ports, helping ensure that users cannot snoop on other users\' traffic.Bidirectional data support on the Switched Port Analyzer (SPAN) port allows the CISCO Secure Intrusion Detection System (IDS) to take action when an intruder is detected. |
| Cabling | 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling10BASE-T PoE ports: RJ-45 connectors, two-pair Category 3, 4, or 5 UTP cabling power pins 1,2 (negative) and 3,6 (positive)100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling100BASE-TX PoE ports: RJ-45 connectors, two-pair Category 5 UTP cabling, power on pins 1,2 (negative) and 3,6 (positive)1000BASE-T ports: RJ-45 connectors, four-pair Category 5 UTP cabling1000BASE-T SFP-based ports: RJ-45 connectors, four-pair Category 5 UTP cabling1000BASE-SX, -LX/LH, -ZX, and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber)CISCO Catalyst 3560 SFP Interconnect Cable: two-pair shielded cabling, 50 cmManagement console port: RJ-45-to-DB-9 cable for PC connections; for terminal connections, use RJ-45- to-DB-25 female data-terminal-equipment (DTE) adaptor (can be ordered separately from CISCO; part number ACS-DSBUASYN=) |
| LEDs | Per-port status LEDs: Link integrity, disabled, activity, speed, full-duplex indications, PoE applied, PoE error, and PoE disabled indicationsSystem-status LEDs: System, RPS, link status, link duplex, link speed, and PoE indications |
| VLAN Support | Yes |
| Power | Maximum Power Consumption: 160WAC Input Voltage and Current: 100-240 VAC (autoranging), 8.0-4.0A, 50-6 |
