Location: Home > Computers > Components > Computer Cases > APEVIA (ASPIRE) X-CRUISER-BK Black Computer Case With Side Panel Window

APEVIA (ASPIRE) X-CRUISER-BK Black Computer Case With Side Panel Window

APEVIA (ASPIRE) X-CRUISER-BK Black Computer Case With Side Panel Window (: X-CRUISER-BK)
VPN: X-CRUISER-BK
Price: $0.00 - $0.00 CAD from 0 stores
» Email this product to a friend   » Write a review
» Discuss on forum   » Post your deal
  Store Product Price  

Product Reviews

APEVIA (ASPIRE) X-CRUISER-BK Black Computer Case With Side Panel Window
65%
Excellent
9%
Very Good
5%
Average
0%
Below Average
1%
Poor
Rating: 9.3/10
MIke
Rating:

Review Date: 04/23/10
Comment:
Had the case almost 2 years it has seen many different configurations never had any problems.
Cheshire
Rating:

Review Date: 04/14/10
Comment:
No hard drive rails. With solid state hard drive you have a hard time making it fit. Other then that its great. Quite too.
Peg Leg
Rating:

Review Date: 03/13/10
Comment:
great case my 1st gamer all meters work everything is more then i excpected thanks
Harley
Rating:

Review Date: 03/07/10
Comment:
I really like this case. It is great quality, has a number of features that makes it stand out. Now that I have built my system, I like to see people's faces when then come into my office and see case fired up, and looking to me, retro. Everything fit into the case well. the edges are well rounded and few sharp edges to deal with. I usually get a few little cuts when building a machine, this time I didn't. Sturdy case and came with all the needed hardware. Everything worked great. Great quality case, I am planning another machine and will probably use this same manufacturer.
freeadam2009
Rating:

Review Date: 03/05/10
Comment:
Definitely a beautiful case. Has lots of USB and SATA ports. Had a problem with the running lights, seems the wires were loosely fit. Quickly figured it out though. I fit a Gigabyte mobo with two hard drives, floppy disk, and two disk drives and I still have plenty of room for more. Sturdy case. I love the CPU vent!
Zack
Rating:

Review Date: 03/03/10
Comment:
I Purchased this case a few weeks ago, the box it came in was beat up, and the Styrofoam clearly did its job. but the case was shiny and new! it could have had a manual inside to explain all the cords but they have one online. it looks insane, but my only complaint is that the front ports are on the Right side of the case, while the cool open-faced side is on the left.
Slim
Rating:

Review Date: 02/05/10
Comment:
This case is the best i have ever buit from. Trust me i built a lot of them over the years. The only thing i don't like about it is front fan hook ups. only supports 2 80mm fans instead of 120mm that i want to put in to draw hot air out. But ill live with the 2 80mm. It keeps my system at 38c.
Ken T
Rating:

Review Date: 01/05/10
Comment:
This case is just easy, it is functional and looks great. While instructions in brail were not included in the box , easy to follow directions were included online. Purchase and use this great looking case with confidence.
Anon
Rating:

Review Date: 12/26/09
Comment:
It's a very sturdy case, probably won't get scratched or broken unless you do something crazy to it. However, the side ports now have an overvoltage problem and actually shortcircuited one of my motherboards. They are useless now and I can't use them. The design is poor; why put side ports on the right if you need to look at your case from the clear side that is the left? I don't understand how this can be $100. It is extremely common for the bolts to hold the motherboard to get stuck. Extremely inconvenient. The front 3 meters are absolutely useless, maybe except the fan speed. The thermometer is broken and the VU gauge has been making annoying clicking noises. It's been maybe less than 2 years I've had this case and I've ran into so many problems.
jas11hng
Rating:

Review Date: 11/29/09
Comment:
love this case, looks great, fits all my components with plenty of extra room. love the temp display on the front. my computer has been running nonstop for over 2 weeks and has not risen above 31c. adjustable fan speed lets me control fans. the amp (VU) meter isnt nessary, but adds a unique look. headphone and mic jacks on the side, along with 2 usb and a firewire port is nice. plenty of airflow in the design. would reccomend to anyone looking to get a sleek case with a few extras. ordered this case on friday, was at my house on monday. thanks for the speedy delivery. as always td rocks!
Ernest_W@NCIX
Rating:

Review Date: 10/05/09
Cons: connectors for the front gauges could be longer

Pros: nice looking
Comment:
I wasn't in stock and took about 6weeks the door opens opposite to most did have a problem getting the front audio jack to work
Demzz23
Rating:

Review Date: 08/12/09
Comment:
very good work great
Xavisavvy
Rating:

Review Date: 08/10/09
Comment:
The airflow through the case is quiet, but effective. The small 80mm case fan i replaced with the 120mm apevia UV Blue LED case fan, and moved the 80mm fan to the front of the case near the hard drives. It is definitely quiet, and keeps my case at 45 degrees Celsius, even while under a heavy load. I am very satisfied with my purchase, but I wish there was a manual of sorts to help you know how to set up the VU (still figuring it out) Otherwise it exceeded my expectations. :)
Josh
Rating:

Review Date: 08/05/09
Comment:
Have had this case model under the old Aspire brand for a few years. Extremely sturdy. Bright blue LEDs became annoying (couldn't leave it on and sleep) and convinced me to never get a case with lighting like that again. I unwired and ripped the front door off years later. Front meters are useless IMO. Temp meter is copper wire style that just hangs around in case, doesn't measure anything important. Access to front vent mounting is difficult. Power pin hookup may be troublesome for inexperienced builders. Front panel USB ports are cheaply integrated and my mechanically failed. Mobo side panel and top panel are difficult to remove. In all, its lasted me but I will be getting a wider case with bottom PSU mount, better airflow design, and omit any extras. I would only recommend this case if you want something sturdy with a very bright glow and a door you must constantly open to access drives.
Seb
Rating:

Review Date: 07/15/09
Comment:
Very nice case with alot of place.
Oom
Rating:

Review Date: 07/04/09
Comment:
This is a sweet case. It arrived is decent timing, but far from complete. I had to contact Apevia, and they hooked me up with the missing front panel, hardware, fans, and fan covers. All in all I would buy again for my next build, tons of room, with a rock solid built frame.
Case Fan
Rating:

Review Date: 06/13/09
Comment:
I purchased this case to build a video editing computer. Great I/O array affixed to the front-side (a nice convenient out-of-way location). The door swings open to left only which would have been nice to have a reversible option. The piano black finish gives an elegance to the case but keep the finger prints wiped off. An eye-catching & impressive blue LED glow front, side, and rear especially when I installed the Apevia Iceberg 680w power supply with LED fan. This case provided just enough space to install the Gigabyte GA-EP45-UD3P MB with the Intel Q9400 CPU and still allow for neat cable dressing for that great visual effect via the clear side panel. The gauges on the front door are very nice. The MB tray only allows you to remove it to install the standoffs, you have to replace it without the MB mounted in order to fasten it to the case (a small inconvenience). Rear slot openings punch-out and once removed there are no replacement covers. This case is a good value worth the mon
stoud
Rating:

Review Date: 06/08/09
Comment:
Overall a good sturdy case for the price. Only downside is that the exterior of the case scratches pretty easy but just be careful and it shouldn't be a problem.
JP
Rating:

Review Date: 06/01/09
Comment:
Case arrived with corner dented. Nothing that a hammer + wood block couldn't fix, but better styrofoam padding would have saved me the effort. Otherwise, works well. Looks pretty too.
roflcopter
Rating:

Review Date: 05/29/09
Comment:
This case has great design aspects going for it. only two problems with it though. 1, get new fans for it asap because the fans that come with it really suck. 2, no instructions however you can just go online to their website and get them, so no biggie. All in all, with better fans this case is an excellent choice.
MAKs
Rating:

Review Date: 05/25/09
Comment:
Great case, nice design, enough space for all the stuff. Illumination is cool, ventilation is good. First arrived damaged - the frame was faulty - but the replacement arrived quickly.
Dee
Rating:

Review Date: 05/21/09
Comment:
The case is gorgeous and was here in one day.
bcrouse
Rating:

Review Date: 05/18/09
Comment:
This was the first computer i was going to build. I wanted it to be perfect. After shopping around here, I found this casing to be the best combination of beauty, pricing, and features. I would definitely recommend it. The case has a nice glossy finish, cool blue LED front panel readouts, and side ports for easy use.
Buster
Rating:

Review Date: 05/13/09
Comment:
I like this Apevia case. The clear side panel and front gauges are especially nice. Does have one shortcoming. It doesn't come with a built-in memory card reader. All in all, I'd recommend this as a buy to anyone building a new system.
Reedb2fast
Rating:

Review Date: 05/11/09
Comment:
Replaced an XG Viper case with this one (door Cracked on the Viper) A solid built case real hinges on the door! The analog gauges are cool,and the removable Motherboard tray makes the build a snap. The Temp probe could stand to be a little longer but it my be my Mobo layout(ASUS M4A79 DELUXE) no instructions but easy enough to figure out if not your first build. Top fan a plus If you plan on adding the additional fans the 2 other locations are for hard drives 2 80mm side by side and get a Molex adaptor if your fans use the standard 3 or 2 pin connectors.
Click Here Show More Product Reviews

Product Features

Product Specifications

Model
BrandAPEVIA
ModelX-CRUISER-BK
Spec
TypeATX Mid Tower
ColorBlack
Case MaterialSteel
With Power SupplyNo
Power SupplyNo
Motherboard CompatibilityMain Board: ATX, MICRO ATX Main Board Size: Fits up to 11" x 12"
With Side Panel WindowYes
Expansion
External 5.25" Drive Bays4
External 3.5" Drive Bays2
Internal 3.5" Drive Bays5
Expansion Slots7
Front Ports
Front PortsUSB, Audio, IEEE 1394
Cooling System
80mm Fans2 x 80mm Blue UV Sensitive LED Fans -1 at rear, 1 on top(w/ Fan Grill & Filter)
Side Air ductUV Air Duct and Filter on Side Window (Thermally Advantaged Chassis)
Physical Spec
Dimensions17" x 7.8" x 19.3" (H x W x D)-including front panel
Features
FeaturesModern Sophisticated Stylish DesignLarge See-through Side Window1 x UV Air Duct and Filter on Side Window (Thermally Advantaged Chassis)1 x Front Fan Gauge w/ Fan Controller (Controls up to 5 fans) 1 x Front Temperature Gauge with Blue Back Lighting 1 x Front Volume Gauge and Volume ControllerFront Panel LED Lights

Similar Products

PriceBat.ca is 100% Canadian Own premier price comparison shopping site. Easy to search & compare prices of computer products, electronics and games at Canada online stores.