IN WIN Z589T.CQ350TBL Black Computer Case

Comment:
I use these circumstances on a every day basis; fantastic excellent, fantastic design.The difficult drive mount sits vertically against the front of the case which assists maintain the drive cool and allows it to not interfere with large video cards. The 'air guide' that enables air to flow from the side vent directly to the CPU works quite nicely and helping maintain the cores cool. The bottom vent on the side panel makes it possible for your video card to have a breath of outside air. You don't need tools to eliminate the side panel, expansion cards, five.25" drives, and (one) 3.five" bay. The three.five" HDD mount and lower three.5" bay do need screws. Thick metal sides maintain a lot of the fan noise in the case exactly where it belongs. The 'air guide' also acts as a 'muffler' and assists maintain the noise down. There are no rattles or annoying 'cheap case' sounds, this is a really solid excellent high quality case. No sharp edges to cut your hands on and nice thick steel. I extremely suggest this case if you're searching for a high top quality case with gaming potential. None really, my only complaints are:The energy LED which surrounds the energy button is a nice touch but is really bright from certain angles and in a dark room it can be distracting.The front USB ports are extremely snug, I have had buyers come back saying they are broken but it turns out they are just afraid to use as a lot force as it takes to plug a device in. Soon after a couple of makes use of they do start to loosen up.Stock exhaust fan is quite weak. Does an adequate job of venting the case and is a excellent top quality fan (YS Tech) but a much more potent fan like one of the panflow verity does a a lot much more efficient job of venting the case and with most motherboards having built in fan controllers the noise is kept identical to that of the stock fan till high load situations occur. To the guy beneath me...there is absolutely nothing wrong with the design of the case. There is no need to have for a front intake fan as a effective exhaust fan will be much more efficient by making a negative pressure inside the case and permitting the heat to be sucked out versus just blown around the case. I have a Phenom II X6 T1055 @ 3.1GHz and a GTX480 stuck in one of small guys and my temps are identical with the side panel on and off. Taking the front bezel off takes much less than 1 second as it takes only a pull of the green lever at the bottom of the case to pop it off; installing the bezel is just as simple. and I discover it easier to remove the three.5" drives from the front anyway.

Comment:
Me and my friend each and every purchased 1 for our identical builds, works great. None of the edges are sharp, absolutely nothing feels flimsy. Nice and sturdy. If you're making a basic develop there is a lot of room to maneuver. The sides snap off and on, no screws. No screws inside either, its all got great plastic tabs creating items much easier to use and get to. The energy supply is decent adequate. We bought these intending to use them considering that the other reviews spoke superior factors of them. Both work great and powers 4670's just fine. Checking the voltages in the BIOS every little thing is working as it really should. It has a lot of connectors, 4 sata energy connectors so you can have up to four drives hooked up. The case fans are excellent too, even with a quad and gpu below load the thing spits out cold air and the vents are in excellent locations. The HDD mount is correct up front and the vent is proper next to exactly where the GPU is. The energy supplies work fine, although one of the two makes a chirping sort noise when it's under load. Much more than most likely, it's just the fan becoming mal-lubricated from the factory, but as low cost as this is I can\'t complain on the top quality. It nonetheless works fine, and like I said, all the energy readings are fine and it works. My only other gripe is that it only has one genuine HDD bay, on the other hand, you can squeeze two a lot more up in the extra expansion bays. If you only have 1 disc drive installed, you can slide two far more difficult drives up there. I did and they function fine. Just have to function around it a little bit.

Comment:
We have bought dozens of these cases for office computers. They use high-quality steel (0.8 mm) and are very rigid. Power supplies are of excellent quality when compared to those that are typically included with cheap cases. The only disadvantage to this case is that unless an optional drive cage is installed, the CPU cooler will interfere with hard drive installation or removal (see picture).