APEVIA X-JUPITER-JR G-Type X-JPJGT-BK Black Computer Case With Side Panel Window

Comment:
Looks excellent with lots of cool capabilities. Lots of drive bays, lots of fan hookups, cool lights, and a wonderful front panel. Fast and cost-free shipping from newegg. The friggin' door hinge is on the wrong side. If the side with the window is on the left you're going to position the thing so you can see the left side. Since the hinge is on the left, opening the front panel from the right suggests you can't see your drives or power switches. It genuinely is a big design and style flaw.

Comment:
Good design and atractive finish! I like the black on blue look! LCD didnt operate at all. I was particularly dissapointed considering that it was one of the reasons i purchased the case to begin with! I was genuinely dissapointed with the LCD, thats all every little thing else was outstanding about the case. Manufacturer Response:Please get in touch with us for a functional LCD. We do not want to leave you disappointed! support@apevia.com

Comment:
fantastic lighting, lots of drive bays in the front that are neatly concealed behind the cool-searching door with the lcd screen that provides you your temp readouts for the cpu and hdd or whatever you attach the thermometers to. not to mention the dial on the front lets you control fan speed and led brightnessusb and firewire ports on the top of the case are really handy if your rig sits on the floor umm the dial on the front that controls fan speed and brightness kinda sucks because if you want to turn the lights out to go to bed, you have to turn the fans off as properly which was type of annoying, plus the lcd screen is cool but it only shows temperature which im not entirely positive warrants an lcd screen but what the heck? arrived in great condition really versatile for motherboardsoverall great tower quite fantastic acquire

Comment:
sturdy. nice lighting Temp lcd stoped operating after 5 months and side fan burnt out about four months in i still use this tower looks excellent

Comment:
Incredibly effectively built, solid case. Although a majority of the construction is rivets, its got screws exactly where you genuinely want them. The tool-much less installation is the very first I've observed where you actually don't will need any tools. Normally the case will come with rails to mount on the sides of your HDD's/CDROM's, but this a single almost everything just fell in and held solid. The front case looks Incredibly sharp and has no slop anywhere, all round extremely delighted with this case.Furthermore it runs Quite cool (temp wise) and isn't a fan monster generating wind tunnel sounds. The glow on the front bottom of the case is non-existent. Don\'t forget that YOU Have to Buy A BLUE LED FAN FOR THE FRONT OF YOUR CASE. If you don't your HDD's won't get cool air operating more than them. The case is sized for a 120mm fan on the front for the HDD's, type of a discomfort, they must consist of advertised glows haha. Furthermore, the case's fan speed controller uses a set of molex female/male connectors to supply fan speed control. So if you intended to use the front speed manage for the CPU fan, for instance, possibly isn't going to function nicely. One final note, I had 1 less copper motherboard screw set than I required. One more words, my ASROCK X58 Deluxe has 9 or so screw holes to mount with and I only had 8 sets of screws/copper setters to function with. Seems like they ought to consist of that kinda stuff for a case at this cost range. When you eliminate the front cover you'll notice the front face wires running by means of two holes, a single on the correct side and one particular on the left side. If you let the ones on the left side stay there they are a major eye sore by means of the window, a massive bundle of wires running messily through your case. Rather, get rid of all the wires from the hole on the left side(the side with the window) and re-route them through the appropriate side so you can hide them all. Tends to make the case look Very clean.

Comment:
Situation looks great and feels solid.. I come across it unusual that it has the audio and USB on best of the case. Situation arrived broken... This is not the initial assessment about the similar incident. All six of the front clips were absolutely broken in half. The front aspect of the situation was just hanging by the LCD wires. I would of kept the case and rigged up the front but with there becoming an LCD on the front no telling what else was broken! Manufacturer Response:The harm was brought on through shipping. You would have to claim the harm with the shipping business.

Comment:
nice case, led side fan makes it look great. some screws where a pain. 1 of the HDD cage screws got stripped. took a hour to get a screw driver, super glue, and a complete lot of strength to get it out. replaced the screw, finish of story. difficult to get to put a fan in. not worthy of a egg deduction.

Comment:
-big space-2 120mm fan (rear,side) w/ 1 optional front fan-fan speed controller w/ two thermometers-great air flow My front APEVIA Led logo died after a month.I have sent them e-mail asking for spare parts for the front LED, but Never ever got their response.Impossible to get in touch with them Manufacturer Response:If you have any queries about our case or need to have help setting up or replacing a portion, you can speak to Apevia's tech assistance at support@apevia.com or contact at 鿍) 718-0789. We attempt to reply to all calls and e-mails as soon as we can.

Comment:
Exceptional design. Has substantial side fan, back fan, LED lighting, and so on. Meant to be left out on display! Don't hide this one particular in a laptop desk. All components fit properly, and considering that it is a steel situation, this a single is going to be hefty and not bend. The DVD player and difficult drive match with no screws. Front LCD panel shows temperature for the CPU fan and tough drive. Test match screws to standoff brass as some of them do not thread onto the supplied screws and can permanently jam so the motherboard is harder to get rid of. The cap on the fan speed handle is not glued on as well nicely, but this is an simple fix with a small epoxy.

Comment:
I fit my Asus p6t Deluxe with a MonsoonIII LT CPU Cooler,, and a GTX 260 in this. I had to mount the side case fan on the outdoors of the clear window, which performs and looks Fantastic since of the metal screen. I went with 3 red fans and a pair of 12"red cathodes. It looks excellent. I have all 3 case fans on the controller, It works great. I can genuinely quiet everything down, then crank it up for load. Onboard fan control nevertheless performs in post as properly! It installs just as the instructions say. Temp system reads Ultra quick! Good Wiring! Sturdy front door and the side door slides in and locks. Packaged nicely, Seriously a fantastic, sturdy case. If you need to have a lot more that three HD slots you will need to reinvest in harddrives. Its not enormous, its nevertheless massive. Just big adequate. The only con I can believe of is the weird sweaty guy on the box. The major (flush) mounted usb and audio microphone firewire ports is perfect for me. The spot in the front for a fan is only acessable if you take away the hard drive cage Ɣscrews) so do that initial! Screwless design is excellent for the cards but watchout on the GTX cards or others that take up 2 slots....The help among the two will pressure on your card, placing pressure on your MB. Ideal to bend this back prior to hand, or possibly get rid of it since it causes major misalignment. By doing this I broke 1 of the snaps for a pci slot. Im lucky I only broke that! Just a heads up.

Comment:
well i ordered it on saturday got it on wendsday including a holiday and a sunday ups guy was a angry pie hole so anticipated it to be broken was in one piece no scraches dents or dings verry sharp looking case and verry shiny for the 39$ i payed for it thanx newegg 1 cable top to the front pannel was not marked so i have no clue what it does so im going to have to take it apart and make an educated believed on what this does 120mm fan rear and 120mm fan side mount will be great but not adequate for what im performing *does have a spot for one more 80mm in the front so i may possibly just utilise that also

Comment:
Purchased this case for my initially create and anything went somewhat smooth. Fit and finish is good. It actually is a sharp seeking case, specifically when you contemplate the price tag. - As previously stated in other testimonials, the PCI clamps break actually very easily but I would under no circumstances use them with out the screws.- I wish the door opened the other course, which means the hinge positioned on the ideal rather of the left. If you consider about it, most men and women will locate the case to the correct simply because the window is on the left. Getting the door case hinge on the right would enable less difficult access to the optical drive, card reader, and so forth.- Mounting a front case fan is a discomfort due to the fact you have to take off the complete front panel and that was kind of a PITA. Although I don't actually have much expertise mounting front fans to other cases. - Only a single of the case fans lights up. I thought one particular was DOA until I looked more closely at the photographs. - I had no concept what some of the case hardware was for. One particular was a dark, thick metal ring and another was a piece of plastic with velcro backing. They weren't pointed out in the manual. I'll chalk it up as lack of expertise/knowledge on my component.Overall great case and I don't regret purchasing it at all Manufacturer Response:The dark, thick metal ring is for grounding the front panel to guard against static discharge which could result in the process to shut down or restart. To set up it, you would wrap the motherboard connectors from the front panel around it. To request a picture on how the installation ought to appear, you can send a request to support@apevia.com.

Comment:
Situation looks fantastic and is created effectively poor workmanship unit recieved with electrical tape covering bare spots on wire and melted connectors where wires had been soldered back into place bare wires against the side of the case can't be excellent for the power provide!!!!!

Comment:
looks good, has plenty of room. fairly good situation. it seems hard to install an extra fan on the front. i have to open the front door to boot and use cd-r.

Comment:
Truly nice seeking situation. Fairly straightforward installing most items. The front temperature gauges are a nice touch. Quite cool fan speed controller. Straightforward to mount drives and PCIs in seconds without having any screws. It would have been cooler if the Power and Restart buttons were on the outdoors. Feels like this door is gonna break anyday now. Most people see the USB ports on major as a con but actully its an improvment for my setup. Last but not least, its IMPOSSIBLE to install a 120 mm fan in the front correctly. At Initially we believed we had to take out the internal 3.5 slots (which was a discomfort to remove) only to come across the screws for the fan doesnt fit the case. It says absolutely nothing in the manual either. we have to tape it on with scotch tape. it wont stay for extended but it functions for now It would have been excellent if it had a tiny superior directions and the fan in the front was actully able to mount a fan. It would have been a five if it was in a position to do individuals things but thats what kept it from greatness. If you dont program to add an additional fan in the front this situation is best for you. The two pre-installed fans need to maintain you cool if your carrying out something but heavy gaming. Apart from, this isnt a heavy gaming situation anyway. All round, a Really great situation.

Comment:
Looks incredibly good all lite up,quite spacious inside,extremely sleek seeking. ok lets commence by saying really affordable plastic on this situation the screwless clips for pci cards and pci express cards are very low cost,the fan in the back does not light up like it shows it does,the fans power connectors are HORRIBLE the pins dont line up correctly so you have to fight with the male and female connectors in order to get them to line up and connect,and like I said about the screwless clips the plastic on the fans are quite low cost and dont move as significantly air as you would anticipate from 120mm fans,and be quite cautious connect or disconnecting the fans the plastic is low cost so you may want to tap the screw holes just before putting into the situation to keep away from cracking or breaking the plastic considering the screws are Large that go into the fans.And also the door is type of a poor style on the left instead of the ideal and the power button plastic is also low cost and got stuck on me for a moment luckily I was capable to repair it. All in all its a ok case not great I say this only mainly because it was only 80 bucks but if it price anymore then that I would of been pretty angry.

Comment:
Good Chassis, sturdy. Plenty of space. Picture is misleading, there is no lights in the front. This seriously isn't a dilemma.

Comment:
Can't beat the value, extremely affordable for a mid-tower case. Installation was uncomplicated and quick, lots of interior area. I specifically like the slide in and lock down this situation delivers as an alternative of screw in sorts for Challenging drives and DVD players. Basic to install/remove devices. Sturdy case. Comes in black so you don't get that dirty-yellow tint like the old-days white instances. Good airflow. I like the temperature display on the front door, backlit in blue and gives a decision of farenheit/celcius by a switch on the inside of door. Power switch is strong, I've had switches go out on old cases the way they were developed they just wouldn't remain in place, but this is fantastic. I like the reset button, should have a reset button. The LED's on the front: Apevia LED, is faulty. Begins to flicker additional times than not. The knob on the front to adjust the speed of the fans was also shotty, had to bypass the knob by removing the cover on the door and solder the wires with each other so the knob is useless now. At one particular point they did function, but I saw no use for it. The great airflow of the case I think makes it possible for additional dust to settle in. I come across myself cleaning the interior with a vacuum every few months, not a significant issue. I have a dilemma exactly where the major-mounted USB, firewire and audio jacks shorted out, theories are from dust. Tried re-soldering the connections but did not repair it.

Comment:
Significant Heavy duty construction. Huge see by window. Built in fan controller. Front Temp Displays. Great glossy black finish. Easy to use tool-less expansion slots. The manual does not tell you about the small metal RFI reducer ring. Also some data about installing a front fan would be helpful to some. This is a wonderful situation for a amazing price tag. Nice major window uncomplicated to install and upgrade your system. Duel 120mm fans. Has a spot for a front 120mm fan. Constructed in fan controller Lots of area for expansion.

Comment:
If you've read some of the evaluations on this situation, there have been cases (pun intended) of broken LCDs, LEDs, side panels getting cracked, and wires not being long enough to reach front ports. All I can say is that I received a situation that worked perfectly. Apevia have to have revised the Jupiter Jr. since it appears that the minor issues with this situation have been fixed.Ok, now for the good stuff. The situation is incredibly simple to function with but you seriously have to take your time due to the fact there are lots of wires that are bunched up. Separate them slowly and program out your attack and you ought to have no difficulties with installation. All the lights worked, the LCD temp gauge works and looks nice, and the fan speed handle does a good job. The blue led Apevia looks awesome with it's awesome deep blue glow.Tooless style of the drive bays worked great. As stated by other reviewers right here, the lower portion of the front panel in the item photo shows blue led lights from a fan...a fan that is not included with the case. You'll have to take out the drive bay and the front panel to do this. There were no guidelines in the manual on how to do this. The manual is colorful but needs revision...it leaves out what to do with the RF ring (not everyone knows this), doesn't inform you how to install the front fan, and could be clearer as far as daisy chaining the fans. Most of the recommendations written by the reviewers right here had been instrumental in helping me to do a effective build with no reinventing the wheel. They filled out a lot of the gaps that had been missing as far as assembly guidelines and what to look out for in making the Pc build less complicated.My rig: Apevia X- Jupiter (of course!), Gigabyte 9800 GT video card, 4GB DDR2 Ballistix Essential memory, Gigabyte EP45-UD3R Ultra Tough three motherboard, Core two Duo E8400 three.0GHz, two- 250GB drives, 2 - DVD R/W, 1 - floppy and a partidge in a pear tree... Manufacturer Response:If you will need enable with the situation, you can contact Apevia's customer service at service@apevia.com or call at 鿍) 718-0789. We attempt to reply to all calls and e-mails as soon as we can.

Comment:
It looks truly nice i like the quantity of usb and other stuff on the laptop or computer the lcd temp display is good touch even tough its not super correct off by four or 6C Only issue that i really feel disappointed about it that when i got it the back fan did not perform wish it was a total tower

Comment:
Just got the case nowadays. For my 1st develop. I has additional Expansion slots then I expected. Which is a plus. Situation is OK. The top rated Audio/USB port was out of line, I just had to push it in more, no large deal. Great design and style. I like it so far. The side panel was sort of tricky to location on, but less difficult than my other tower, not seriously a "con" but something to assume about. I would have liked a case with a door, but for the value, I get what I paid for. none, great case for the value

Comment:
Temp monitor is nice, and is as accurate as the Motherboards CPU monitor. Has firewire on best with the audio and usb..... kinda wish it was a USB3. port, but whatever. Power/Reset are on the inside of the door. Not a massive deal I guess, but they could have place them on the prime.

Comment:
Looks wonderful, plenty of room, USB, firewire, and headphone/mic ports on prime are very convenient.Tool free, straightforward to open, uncomplicated to install PCI cards. It's a little annoying to open the door every single time I want to hit the energy button or access my DVD drive.The USB/Firewire ports on top are noticeably slower than the ports directly on the MoBo.Audio from the port on prime has an annoying buzz (electrical interference). Overall I'm happy with the case, these cons are what make it four star and not five.

Comment:
Looks cool Couldn't fit my aftermarket CPU cooler in due to the fact the fan on the side of the situation is so poorly positioned. Also, the holes to screw the motherboard into were all slightly off, generating it really challenging to screw the board in.