COOLER MASTER Gladiator 600 RC-600-KKN1-GP Black Computer Case

Comment:
Venting the energy supply out of the bottom of the case, 120mm blow hole out of the top rated and two 140mm out of the sides and a 120mm from the front across the hdd's. Add to this filtered CD-Rom covers, if there is not a Cd-Rom present it is airflow that the two x 140mm side fans can use to pull air of of the cage. There are Masters in every single arena, this is a single of them... This is a true Cool MASTER by style! Nice job and the price tag incredible! Zero! I paid 50$ and cost-free shipping, didn't come with all the fans but for that price get the fans and be content. If you want awesome and a great price this situation cannot be beat!

Comment:
This is a nice case. I am new to building computers so I don't have any reference to evaluate this to. Here is what I see as the pros- Power provide vents out the bottom. 5 fans can be installed so there is a lot of ventillation. Sturdy style no sharp points. Front panel has 2 USB and 1 esata ports. Tooless install of drives is super effortless. Lots of room to expand. It would have been nice to have a hinged side panel. Each side panels are removable. The two fans that can be installed on one panel, I have plugged into the motherboard. So when I take the door off I have to unplug the two fans. Not a bid deal. I suppose I can get an extension or use a fan controller. If you are not going to open the panel considerably it is not really a con. I believed this situation was effectively worth the funds. It is not expensive and has anything I needed. I would purchase this case once more.

Comment:
Quite good situation. Demands a lot more area for a large video card. The difficult drive mounts were hard to install sata cables to the motherboard.

Comment:
Clean, solid, beautiful. None

Comment:
Had this up and running for awhile now with no problems. Very COOL and quiet runniing, properly built. Im quite glad I bought this 1, I constantly seem to come back to coolermaster, oneof the ideal values for the money out there. Only the fact that this 1 will never ever wear out but I know coolermaster will inevitably come out with somethiing new Ill just have to have regardless of whether I require it or not. I have 4 coolermasters now-- I feel I will need an intervention. This case has Exceptional cooling with just the right consertave but not stodgy look for me. Holds up to 5 big fans, two in side, a single in leading, front and back-- a lot of cooling even with video cards.

Comment:
Now that I have this situation up and operating, I enjoy it. I had one (small) concern with the three.five' bay adapter, but very easily solved (see "GG" explanation below) - this is a good looking case when lit up, front "chrome" bar is special look devoid of being wild, led's are good little size with incredibly light blue color for a change - excellent! -not also blue or too bright. Lots of difficult drive space, uncomplicated access, ordinarily effectively built coolermaster situation overall, in particular for this cost range. Really like this one particular, has a specific "look" to it. Lots of room for up to 5 fans so cooling should be wonderful. Has up to 10-3ǚ" length for video cards. As I mentioned previously, I had an situation with the three.5" bay adapter, but soon after juggling some screw lengths and adding some washers in the correct spot its nice and tight. I nonetheless wont take off an egg given that the case itself is so decent. Couple of situations are perfect out of the box. Got mine for แ.00 & cost-free shipping, value went up subsequent day. This case has excellent features for the funds, access hole in the motherbard for in-situation cpu cooler removal, side access for up to five tough drives, nice front 120mm led fan, prime 140mm fan, holes and attachment points for excellent wire management. Reasonably quiet even with 5 fans on low/medium. this ones a keeper.

Comment:
Lots of area,tool-totally free drive bays and looks amazing. Two big & quiet fans included. Fan led switch. Esata on front. Straightforward to function with. The tool-totally free five.25 bays hold optical drives perfectly but don't appear to hold 3.5 to five.25 adapters as snug. Awesome for the price tag. Newegg is the ideal!

Comment:
Effectively built caseYour going to have a tough time obtaining 1 this great for the price tag.Its my very first tool totally free case.I was not positive I would like that but it worked out incredibly effectively.Nothing has moved however. No rear fan.Not massive on the lights in or on the case it has 1 blue 1 in the front.But you can shut it off if you do do not like it. The create was a Asus P7p55d-ELGA ATX motherboard,i5-750 two.66Hz,Asus CuCoreEAH5770,Samsung 750GB HD,2 ASUS DRW-24B1ST,coolmasterGXrs750w PS

Comment:
General Features:Impressive attributes for the money. Looks quite great, not overstated. Fairly sturdy and nearly idiot-proof. Good cable management. Each side panels and the front easily come off for cleaning/expansions. Face your bottom-mounted PSU up or down as you like. Front panel i/o cables have great reach.EXPANSION:The screwless style is excellent for the drive bays (love it). The rear exp-slot clamps are much more than adequate for all but massive graphics cards. Even so, they did present holes for screws in any event. AIRFLOW:Intake fan is very quiet and you can turn off the LED with a button. It blows right via the sideways-facing HD cage, which could be a pro or a con depending on your create. I personally like it blowing in between two drives three-four" apart. 140mm best fan vents plenty of air and is quiet. Each fans spin at �rpm @ 100% My only gripe is there is no stock rear exhaust fan and you can't move the 140mm best fan there (will only fit up to 120). Would have been good simply because the stock fans are silent. My setup is in a fairly tight cubby, so I added a 120mm rear fan and d/c the 140. My setup is no purpose to knock an egg, certainly. Out of box, it's ideal for open air. TEMPS: P2 x4 965 ranges 40-45C with a low cost Tt cooler . GTX 260 ranges from 50-65C and is the loudest thing in the case.

Comment:
Tool less design.Sharp searching.Great good quality.Roomy. No rear fan.Rear port cover flimsy.Plastic locking tabs for PCI cards tricky... quickly broken. I have carried out numerous builds with the additional pricey Lian LI circumstances, and tried this 1 for a less costly create. I discovered out that I have been wasting my income as this case is as fantastic as the Lian Li circumstances.The tool much less front mounting technique for the challenging drives and the 5 1ǚ bays are essentially Significantly superior than Lian Li's.The drives are simpler to install and significantly additional secure. I do not like the back of the case, the template for the back usb, monitor ports is incredibly flimsy and leave too substantially of a gap, amongst the case and the motherboard.Why no rear fan? Not that its hard to install a single, but its just weird. The Card clips on the rear are tricky and easily broken. You need to have to press in on the semi circle region and the clip will open... any tugging in any other region will guarantee a broken clip.These are quite MINOR annoyances and I would advise this case over ones costing twice as a lot.

Comment:
Exceptional case for Liquid Cooling/Modding. Painted the inside of this 1 Matte Black for a Customer Build. All Black, Black Fans, Black Rad. & Black External EK Alum. Leading & Bottom with BitsPower Matte Black threeǞ" Barbs. UV Invisible Blue Coolant and extra Internal Reservoir for Leading-Mount Fluid Fill. SLI, N. & S. Bridge Cooling Blocks & CPU Block, all threeǞ". Invisible Blue UV paint on 'Specific" places on motherboard, Video Cards and Fan Centers. Just adequate for accents in the course of UV Lighting. Cons- Only Con is getting a Buyer who CLAIMS they are a High Understanding Tech. who leaves 1 Egg due to the fact he can\'t figure out that "Running" the 8-Pin Added Power Plug UNDER the Video Card between it & the motherboard, in front by S. Bridge or more than toward PCI Slots- will shorten the "Running Length" of his cable. You Falsify your Knowledge here on NEWEGG, leave 1 EGG simply because you nevertheless have YOUR egg-tooth and will need to have your Large Brother shop for you. Come on People today, take responsability for your decisions. Read the Forums over the 'net, ALSO, if you don't feel that the NEWEGG description is adequate. You aren't acquiring a New Home or a HUMMER... but nevertheless, the 'net forums have TONS of feedback by other people who have a lot more experience and also GET ANSWERS from other members. So, leave your frustrations at house, but do not take them out on NEWEGG, esp. if you bought your Item/item elseware, then come here to complain. Grow up, boy. Intended for N/A who left the response on 3ቫ񳏊 6ᛝᛟ PM. The rest of you NEWEGG Clients who have given Honest info. of your Information and expertise, plus your honest Opinion on this case- YOU ROCK just like NEWEGG!

Comment:
Properly built and sturdy, the whole front of the case is filtered, there is an included filter for an intake fan you might mount on the side as nicely. Lots of space for bigger video cards, decent fan positioning. All around quite pleased. Back edges were a small sharper than I expected and I cut one of my fingers by holding it on 1 of the sharp edges pulling it out of the box, be cautious, it's not thin and low-cost just sharp, I really should have actually known better I have built well over 2500 computers. I will be acquiring far more, they make excellent cases for gamers who don't want to invest a fortune.

Comment:
Excellent ventilation, Solid easy to install hard drive mounting clip technique, Solid CD/DVD drive mounting method, Bottom mounted power supply bay, Plenty of space to operate in with good wiring configuration. Zip ties included to bundle up unused wires and tie down other people nicely. Very good construct quality over all and fairly light weight for a steel case. The hard drive bay faces out so you Have to use a proper angle adaptor for each SATA power and serial cables to be able to close the case. I don't see becoming able to use a IDE drive with a molex power cable with this case. I've build computers with situations as high priced as the Stacker series and for the funds I locate that Cooler Master circumstances are very well created and straightforward to use all the way down to the lease high-priced models. Go for it.

Comment:
Classy Looking. My second construct and this is an uncomplicated to use and very good looking case. Solid. Non. EVGA P-55 Classified 200i7-870XFS 5750Samsung 1.0TB HDSony 12X Blu Ray BurnerCorsair HX650w

Comment:
Fantastic, dual fan configuration. Fans are quiet. Absolute genius challenging drive installation bays. Looks superior with the mesh and panels for bays are simply removed. The plastic clips to aid hold different cards in location are pretty flimsy.

Comment:
Compared to the no name case this replaced, this is quite a step up. It was between this case and the coolermaster centurion 590. I went with this 1, and I dont regret it. This one seems a little nicer seeking: with the shiny bezel about the power button and front usb, and doesn't seem to have the exact same poor paint job people today complain about on the 590. It accomodates large video cards and keeps temps down with all the added fans and the bottom mounted power provide. Like with any case with a bottom mount energy provide, make confident cables will reach. In contrast to the 590, does not have holes for a later upgrade to water cooling. Doesn't have a side window, which is a massive deal to some, but IMO I would rather have the 2x140mm fans.. I had to uncover a case that would fit in a compact desk compartment, that supported a big video card 񤀀GT) and had really a bit of cooling capacity. This and the extremely silghtly bigger (by a couple inches) centurion 590 had been the very best cost efficient solutions I found to fit such a compact space.

Comment:
Can hold 3 140mm fans and two 120mm's! Comes stock with a 120 in front and a 140 up best.. GR8 cooling! Dropped my core2e6600 from 45c or so in my old coolermaster Mystique to 28c idle! CPU cutout for screw in cpu coolers, quite handy for those of us who upgrade allot. good hole cut outs for wire management, and you can still close the side panel with the wiring taped up on the backside.. :) You may well will need some cable extender depending on your powersupply. Looks quite nice, incredibly modern day/subdued. I have it sitting in my living room subsequent to my enertainment center given that I game on my lcd/surround sound, mostly sim racing, and the case looks really good subsequent to the all black theme i have. and you can turn off the front led! Quite thoughtfull of them. And now the poor... I dont have a lot of, but 1 is poor sufficient. so I have a zalman 7700-cu cooler. Mounted the motherboard with cpu attached, as well as the 140mm fan installed up best. guess what? It doesnt fit! the fins of the cooler rub up against the fan, not allowing it to spin freely! Why they did not consist of a slimmer case fan for the top I don't know, I know they make 20mm or possibly 15 mm fans? THIS is a gamers case, don't they know we will use aftermarket heatsinks? Well anyway, I just moved it to the side vent location, so now I have a 140 yate loon, and the coolermaster 140 fan, they are both incredibly quiet, and move comparable amount of air. I also have the stock 120 in front, and i put in an additional 120 in the back, also a coolermaster from my old case.. Good and cool. I will have to appear on putting a screen filter up top to preserve dust out, or locate a thinner fan to install up leading. as cool as my system is, dont genuinely believe I want it. So in final notes, gr8 case, looks very nice, a lot of cooling possibilities, and the nice front mesh with built in screens are very good, but dont program on utilizing a big fan form cooler with this! I feel those utilizing a heat pipe model really should be ok.

Comment:
Massive enough to have a lot of room to work, but not take up a "large" footprint. No annoying extras. Just make confident your power supply cables are lengthy sufficient to reach the best of the motherboard. I'm using the CORSAIR CMPSU-850TX, and it barely reaches. Didn't come with all the fans, so had to spend some added income to get fans. Type of a mixed blessing seeing how most stock fans suck rather of blow.

Comment:
awsome case solidly built,surprisingly roomy for a mid tower case,wonderfull ventalation,precut holes in mobo tray for cable management can hold up to 5 120mm fans ɢ a win for ~์ case in my opinion none

Comment:
My anticipation of having problems with purchased components was 100% meet. Soon after reading reviews of all the components I was purchase (complete develop) I knew it was going to be a gamble, thought I would have issues with the mobo never ever would have thought the connecters inside the case would be completely destroyed. Opened the box to come across the front I/O panel cable connects (mobo side) looked like they went by way of a grinder. The audio connecter was in 5 piece and the wires were torn from the USB connecter. Just my luck. RMA'd but I'm losing time on the other components. How in the world can a connecters inside of the case get destroyed? Had to RMA back to Newegg, but my return clock keeps ticking away with all my other components will I wait for a replacement. By the time I get my replacement case I'll only have 2 weeks to varify all the other components function. Newegg ought to send a replacement quickly and bill me if they don't receive my return case. Not a great firt impression with newegg.

Comment:
Solid, quiet, a lot of expansion bays, stock fans keeping everything cool so far but nonetheless lots of space for expansion The 3.five" expansion bays run the width of the case, not the depth of the case so you have maybe an inch of space on each side to run your SATA energy cable in. The tightness was wrenching the cable and brought on the flimsy plastic connectors of the SATA ribbon to snap off. Ended up having to use electrical tape to maintain them attached. This is a nice box that I'm employing for an HTPC. I gave up on those tiny HTPC circumstances due to the fact they're too hot, too noisy and don't have readily available storage expansion. This box has it all. Sure it's bigger than a typical HTPC case but it provides me every thing I want and in fact works.

Comment:
comes with a front 120mm blue led fan with a on/off switch in the front panel for the led. and a 140mm exhaust fan on top. there are also spaces for 2 side panel 120mm or 140mm fan, and a baxk exhaust panel for a 120mm fan that you can add.very nice ventilation. the front panel also comes with a fan filter which is nice, keeps dust out.only thing you have to watch out for is when trying to move the plastic pins for the pci slots. i broke one when i opened it incorrectly, had to superglue the pin together. you have to push on the side, and the pin will pop out.overall this is a great case. great quality. great packing. lots of space for fans.

Comment:
some people say the plastic clips break easily. I don't think so,unless maybe you force them. Has very good ventilation, even with 2 fans. there is lots of room for my M4A785-m it almost looks lonesome in there.

Comment:
This is a pretty solid case with good airflow and lots of room for installation. As mentioned below, the plastic clips can break rather easily, but overall this case is still a great value. Comes with two fans and of course will channel your inner gladiator. (best case description ever!)

Comment:
Great cooling everything stays 39 degrees C or cooler with stock fans. Installation was easy and the cables tucked away pretty good. I would buy another cooler master 600 case for any build. I actually bought 2 of them and had no issues with anything. They were also packed well no damage.