COOLER MASTER R4-BMBS-20PK-R0 Blade Master Case Fan

Comment:
Purchased this for a second fan to make a push pull on my Cooler Master heatsink Hyper 212 Plus functions great so far dropped some degrees on my cpu a Phenon quad B45 denaub that is an unlocked 445 Rana runs a tiny hot unlocked this helps None Will let you know if I have any issues so far none quiet as can be runs superior Smarts if you place your finger in it though its running LOL

Comment:
Im employing this as the second fan for the Cooler Master Hyper 212 Plus CPU heat sink. It is the identical exact fan that comes with the heat sink, quite quiet and moves a ton of air. Really happy with my buy None

Comment:
They seem to be really well built and they are heavy for their size. a tad loud taking into consideration their specs

Comment:
This is a excellent situation fan. Its plugged into the method fan 4 pin connector with the technique fan speed manage function enabled to differ the fan speed according to temperature. Incredibly effective and quiet at all speeds. Does what it's supposed to do incredibly effectively.As usual super quick Newegg shipping. None

Comment:
Quite high flow. I have this running through the radiator on my liquid cooling setup, and temps dropped from 58 to around 45 degrees, and I only have this fan operating at 60%! Surely not noiseless, and considering that I have it mounted outdoors my situation, I do hear it. It is, on the other hand, substantially quieter than a single of my other fans, so I can't complain also much. I purchased this one and one more Cooler Master fan that turned out to be much louder. I wish I had just bought 2 of these.

Comment:
Uncomplicated to install, looks cool, operates excellent with the more fan attached, and can't even hear the fans go. None Its major. I bought the AZZA 1000 total-tower situation and it came with 14 mm fan on the side of the situation which I had to take off. This is not fault of this item, but mine, just be careful when ordering the situation

Comment:
4 pin PWM. Solid constuction, great get. No LED! none Added as 2nd fan (push) on Coolit ECO A.L.C. Utilized 6-32 threeǞ" round head machine screws w/washers (not confident I really needed the washers, but just playing it safe). Enabled Q-Fan manage on Asus x58 Sabertooth mobo so fan did not run at total RPM - tremendously reduces noise of air becoming pushed through radiator, and temps nonetheless incredibly low.

Comment:
Balanced adjustable fan. Fantastic value. I say balanced since you can move a ton of air and deal with noise, or turn it down for quiet but move a moderate (though substantial) amount of air.It spins at nearly 1300rpm at 50%, which causes a quiet whirring. ᤨ% it's indistinguishable more than the rest of the machine. It's not 100% silent?

Comment:
got this fan on my hyper 212 heatsink, it works great.

Comment:
This fan moves plenty of air and it is 4pin . I purchased it from the CM list of case fans with the existing R-four BMBS-20PK-RO ID. I utilised it as a case fan in the cooler master 690. I place it in one particular of the top rated slots at first as an intake more than the cpu but took it out. It did help to generate a cooler atmosphere as I learned soon after its removal; the current CM fan isnt as helpful in that respect. The price tag was also and desirable point. Otherwise I believed it was just one more fan whose rpm would go up and down. only a single egg less for noise considering that it cools really well and noise isnt a big concern for most makes use of; and only because the db rating would appear to indicate much less. It is incredibly noisy. My other fans dont make a sound and I had no concept which fan was producing the noise simply because i had a significant fan rearrangement and added 3. It was truly invasive due to the fact not 1 of the other fans (all but one particular was either stock or aftermarket CM) I got one Scythe but it was soundless. this one particular created so considerably noise I removed it.after reading the above review by dlm, i think, who stated it was the same as in his Hyper212 I located out what it was.I had been looking the fan /case fan pages and could not uncover the model number in the list of CM fans and had to go to the order background to get the true quantity I purchased. The one they sent me in the box with this mod.# didnt have this one on the fan itself. it has the very same number dlm indicated was on his cooler heat sink fan. so i was able to find it to examine out the specs since i tossed the box. the only con is seriously the noise. It didnt anticipate it from the numbers they listed. I , at least , discovered out I have the same fan they use on the hyper 212. I had this a single in the CM690 side panel as properly as in the top rated slot each performing intake duty and it helped keep the Xigmatek s1283 keep the 965be four or 5F cooler at idle. kept the air circulating properly about the memory and cpu as properly as the 4870 i had in there at that time kept that 5C cooler at idle and low cpu use. It was just as well a lot noise and given that the addition of the xigmatek i had to lose a single of the side fans (i utilised 2 with the stock 965 fan) and managed a cooler idle temp prior to the new cooler by a few degrees.The coolermaster is so open the noise traveled and in a far more solid or far better insulated box the noise would be far more surpressed and even against the fins of the cooler the noise would be muffled. I never bothered to see how loud it would have been at max due to the fact i under no circumstances actually put it throgh any major tests; it was noisy adequate at middling temps which is why i took an egg or it would be simple five for cooling

Comment:
78CFM3.9mmH20quite quiet none

Comment:
Excellent fan for motherboard thermal management if you’re undertaking water-cooling or needing a replacement fan for a CPU cooler. None the fan kit offers you every thing you require plus rubber dampening pads. Also wish they produced the Blade Master in a 140mm size, but this one is carrying out the job and carrying out it well. CPU i7-980X @ three.748GhzMB ASUS P6X58D-E GPU's BFG GTX 260롰 SLI/FoldingRAM 6Gb G.Skill DDR3 @ 1600Mhz PSU Ultra X4 Series 750W SSD xG.Skill Falcon 64GbHD WD VelociRaptor 150GbWater-Cooling Setup all Koolance

Comment:
These issues move a LOT of air! Working with them in a push-pull setup an a Corsair H50 and they function very effectively for that. With fan speed set to 75%, these preserve my i5 750 @ 3.6Ghz about 32 deg Celsius idle, average under load even though gaming 55-60 degrees Celsius. Very loud at complete speed! Sounds like a leaf blower with two going complete blast! They are pretty quiet beneath 75% even though, and nevertheless move sufficient air to get the job done. I didn't believe I could live with the noise these things made when I very first put them in my computer, so I purchased a couple Masscool fans Item #: N82E16835150115 to replace these. The Masscools were certainly quieter, but my temps climbed 7-ten degrees over the Blade Masters.

Comment:
I utilized this fan as the second fan in a Push/Pull configuration for my Cooler Master Hyper 212+ CPU cooler. It operates fantastically and lowered my CPU temperature an more 4C. Excellent worth! None

Comment:
Got this to perform with the Prolimatech Megahalems. Works as expected. Fantastic air flow. None.

Comment:
Superb replacement fan for the Corsair H50 process. I put two of these on the radiator in a push pull configuration and dropped my temps one more 4 degrees beneath full load. Good price tag, fantastic fan. None. I am a new user of cooler master solutions, and have to say I am impressed so far.

Comment:
Quite effective fan, exciting blade style. Fairly quiet at low rpms, but at any appreciable speed they are noisy. A high-pitched, shrill whine. This won't be locating a house in my pc, on with testing. I was disappointed having had good outcomes with the Cooler Master 69-cfm blue led fan. That fan is quite quiet even though, understandably, they do make some noise at full rpm. I have one particular running at 1400 rpm and it's extremely quiet.

Comment:
seem to move air pretty nicely. pretty quiet. no LED is a good solution. seem to play great with my fan controller. I got two of these and you can feel a slight rumble in them though they are operating, even at lower speeds. but the rubber vibration dampeners seem to take care of that. these seem to work pretty nice. i'm employing them for front case fans blowing on the HD's at a lower speed. they seem like "keepers".

Comment:
Bought to add to a Hyper 212 for a pushpull, functions perfectly. None As advertised

Comment:
Just to clarify....this is the fan referenced on the Cooler Master net web site as the 'matched' second fan for the Hyper 212+....just to take away all doubt. None....tends to make a great cooler even superior.

Comment:
A really inexpensive fan that runs quiet, excellent product None None

Comment:
Good fit, lots of air Noisy at complete speed I put this in my Antec Twelve Hundred case as an optional fan. It fit nicely, and plugged it directly into the motherboard. At complete speed, it was also noisy. I had to lower to threeǚ speed for the noise to be tolerable.

Comment:
I needed a 4 pin 120mm fan to put in my sg01w case (you heard it right!). My case was getting hotter with my new i7 2600k overclocked j4.4 ghz, plus a GTX580 in such a tight places, so i have added this fan in the bottom in between the front and the motherboard on the cpu side, it fits perfectly. It is connected in the cpu fan connector and speed faster when needed.

Comment:
Drop temps quite nicely on my hyper 212+, looks great. None Serves its objective, with hyper 212+ on a 965 quad oc'ed at four.1 ghz, idle temps = 26 c, normal use ៼c, extreme tortue testing max 51 c. Combined with artic silver 5 thermal.

Comment:
I put this on my hyper plus 212 so its hooked up to the mother board and controlled from there automatically. It can get somewhat loud (and i use loud loosely) but when my mother board puts the rpms a bit down, it is fairly quiet none ideal for the hyper plus 212 This will fit an antec 300