Corsair Cooling Hydro Series H100 Extreme Performance CPU Cooler System LGA775 1366 1156 AM2 AM3

Comment:
This is a very good hydro cooler...will buy again!!..THanx NCIX;)

Comment:
Easy to setup, not that expensive for that kind of cooling capability (keeps my Q6600 g 3.2Ghz g 40c load!) Replaces my dead Coolit Domino

Comment:
This is the perfect cooler right now. Running my OC i7 2600k p4.4GHz and idle temps are at 24 deg and max temps at 60 deg under full load running prime 95. Ambient air temp in room is around 21 deg. I'm going to add 2 more fans for push pull soon to see if there will be any difference.

Comment:
From what have read elsewhere I didn't bother to try the supplied fans, instead bought a couple pf-12 noctua fans for the top pull and added a couple vegas fans on the bottom for some push with bling. Temps under load on a 2600ka 4.4 is around 50c with prime95.Gaming say 35-40c, nosiest thing in my system now is my ps.

Comment:
I purchased this unit approximately 2 weeks ago, and am quite pleased with the performance. It allowed me to take my 2600k up to 4.8GHz, with temperatures staying around the 60°C mark. I'm sure that my temps will drop  some more once my thermal paste has a chance to cure.Installation was easy, and the integrated low, medium and high speed switch is nice as it gives flexibility to the user, however I set mine to high from the start because I wanted the maximum performance. The included fans push a respectable amount of air and are not annoyingly loud, I could probably get a few degrees lower by implementing push/pull, but at this point it is not necessary since I'm not going for a stable 24/7 overclock of 5GHz, and I'm comfortable with the temps.

Comment:
this is a pretty awesome cooler. it will destroy the stock cpu fan!!!

Comment:
I like this cooler, it performs well, I have a 6 core AMD running at 4.2 GHZ that has yet to break 45 degrees.but because of my experience receiving and installing, I have to rate this a 3.first thing, right out of the box some of the rad fins were bent because a pack of screws was loose in the box during shipping and knocked in to them.Second, and most crucial, the fan mounts on mine are not square and DO NOT line up with the holes on the fans.it took me approximately an hour and a half to mount 4 fans in a push pull configuration and I had to leave one screw out.Quality control is lacking at corsair and the only reason I didn't RMA it is because I already had to RMA a VGA for the build and I just wanted to get it working.

Comment:
I'm very impressed with the h100. I wasn't a big fan of the corsair hydro series. I returned my h70 because the fans were to loud and wasn't cooling as good as my air cooler. But with this you can control the speed of the fans. It cools so well too I was running stock cooling and it was getting up to 70 degrees while I was gaming. Now my cpu hits 50 degrees while gaming! Overall get this if you want to OC and don't want a big air cooler on your MB.

Comment:
Picked this up as my 1st baby steps into watercooling. No complaints so far. It didn't fit my CM 690, was pretty sure it wouldn't, since the top fan mounts are not spaced for a rad. Not a big deal, lined it up with the front set of fan holes and just modded the top of the case to the new spec. I also had a mounting issue, inside the case, due to space issues. Again not a problem. Took off the top cover, cut out the little plastic bits and then cut out the mesh. Rad mounted inside and fans mounted on top of the case in a pull config.Just outperforms my old TRU by a few degrees, so quite happy with the purchase.

Comment:
Great product. Upgraded from H50. This H100 has much better cooling performance, I'm running my 2600K m 4.8 ghz 24/7 and this is keeping it at a decent temperature. It's a little pricey for a CPU cooler but still cheaper than any custom liquid cooling loop. Zero maintenance as well. My unboxing: https://www.youtube.com/watch?v=V0xcSNLGoGc