Corsair Graphite Series 600T Black Steel / Plastic ATX Mid Tower Computer Case

Comment:
Overall, this is a very good case. I love the fact that both sides of the case come off very easily to help run cables.There is also a hole cut directly below the mounts for a CPU, so mounting/removing a heatsink that has a plate on the bottom is very easy.Love the easy mounting system for the DVD drivesCase is a mix of plastic and steel, plastic makes it feel a little cheap.I would recommend this case to others to buy though.

Comment:
I just love this case it is a real quality product from corsair and I really love the all black interior and the cable management.

Comment:
This is about as close to a perfect case as I have found. An excellent value when on sale, a little less so when not on sale. My build fit in perfectly and looks good. Airflow is not a concern at all. My only complaint is the USB headder uses a standard male connector for USB 3.0 forcing you to route it out the back of your case and into your motherboards back panel.

Comment:
I got this on sale for just over $100 on Canada Day. I used this for building my first desktop and it's pretty beginner-friendly. No tools required for mounting your drives - all you have to do is just pop it in. The grommets allow for easy and tidy cable management so it doesn't obstruct airflow. There's also enough room for you to put a radiator at the top stacked with 2 100mm fans.The only complaint I have is that the front panel USB3 uses a male header, so you can't connect it to the motherboard.

Comment:
Overall the best case I have owned, and it's very roomy inside. Feels solid, is solid. Ample options to route cables, ample room to stick both your hands in the case to work. No sharp edges anywhere.Only downside is the bottom dust filter for the PSU has to be removed from the back of the case instead of the front.

Comment:
This is a great case but the cooling is a downside with 200mm fans that are hard to replace. Front fans you cannot swap for 2 120 mm fans without modding.Overall I do enjoy the case as there's plenty of room, has understated looks and build quality is acceptable

Comment:
a definite improvement from my old antec 900. lot more room, and better cable management. could just be me, but it sounds quieter than the 900.

Comment:
Just a very nice case. Easy installation with wire assembly being the best I have seen. No modifications of the case were necessary.

Comment:
Order this from DirectCanada and it was a money worthable case. Got it for a decent price.

Comment:
I like everything about this case. It's a solid piece of workmanship. You won't regret this purchase.

Comment:
I had been looking and wanting this case for a very long time, it was on sale so I finally went for it and couldn't be happier. It is very quiet, keeps things nice and cool, and it is sooo easy to do a very nice cable management job. It is however, quiet a bit larger than I was expecting.

Comment:
I'm not one for flashy cases, so the fact this is a relatively simple case suits me well. A few specific thoughts:- The fan control knob while not precision, still let you limited control of a few fans nonetheless. - For where my tower sits, the top-mounted ports are convenient. - While I prefer a case without lights, the white LEDs from the 200mm fans are the least offensive ones for my tastes. - The door mechanisms seem to be quite robust and I'm keeping my fingers crossed that they won't fatigue or break any time soon. - The bottom fan filter for the power supply is a little awkward. Don't get me wrong, its great, I just had to go out and get some shelving to rest it on because I figure having it on carpet would be a little bit of a pain. - Quiet. Considering the last time I put together a desktop was 6+ years ago, so for me its a step up from the old tower and the lappys I have. - It is a little big heh, but I'm getting used to it. Good thing I didn't get the 800D like I was initially thinking. All in all, considering what I prefer and need, it's great.

Comment:
For my Pro build project i went with this baby, very well thought out and Liquid Cooling friendly. Quality paint and excellent fans. Another Quality product from Corsair, high recommendations.

Comment:
The latches on the panel broke for me when I had it propped up against the wall and it fell over, called corsair they said they were going to ship a new panel out still haven't gotten it.... other then that I am really happy with this case.

Comment:
This has been a great case. It is very solid. I've had to move it a few times; though it is quite heavy, I have no worries about the case getting wrecked by being moved around. The cabling is wonderful. The silicon grommets provide lots of flexibility for where to run the cables.The case is extra wide, which can be annoying if you want to fit it into a desk/shelf meant for a standard case. But this extra width makes running the cables much easier.The airflow is great. I have had no heat problems at all.

Comment:
I love my case, a little dynamat and it's perfect :)

Comment:
For my first pc build, this case was the best choice for me, it was easy to work on, and this looks very sophisticated which I like alot compared to other cses

Comment:
I would definitely buy this again. The box it came in was well packed, and packing material was not cheaped out on.I can't seem to figure out all the wires coming of it in regards to the fan controller, even with some googling. Cases rarely come with anything more than a "contents included" card, but with the build quality, I've have like to seen at least a little bit of a manual.

Comment:
To make it simple, this case is a must have for anyone who want a clean and easy installation for their PC.The pre-made hole for the wire in this case are just awesome, it makes it so easy to mount your stuff it's just incredible! I would buy this case over and over without a blink.

Comment:
Very nice case, built a new system with an MSI P67A-GD65 (B3), i5-2500k with a corsair h50, MSI 460GTX Hawk OC, and 8GB G-skill ram (ddr3-1600). Needless to say I immediately overclocked it to 4 ghz out of the box with no problems (expect at least 4.5). Idle temps on processor are from 28 to 31. I am surprised by the seemingly little pressure created by the fans. If I place a piece of paper on the top of the case and crank the fan controller, the paper barely moves. I find the fans a little loud as well, but very quiet in comparison to my old 80mm fans in chieftec case.HIghly recommend case for a very clean build.

Comment:
Great Case would buy this case again and again.

Comment:
This case has been my dreamcase for the last 5 weeks and I had to see a bunch of things to afford it. Gotta love the style and size of this beast. Allows for easy cable management even for the beginners and included all the necessities to manage the interior. Switching from a COOLERMASTER 430 to this is the best decision I made for my PC. The only downside are the fans which I was hoping to switch and may take some time and work to do. Just touching the case side, front, back, and top tells you just how good Corsair is at making high quality cases.Love it.

Comment:
This is my first "NEW" case I have purchase,to go withmy new system.Very glad i got this case.Great size, better then I thought it would be,very roomy,good layout.Cable management keeps it so clean, not needing any tools is wonderful.Would like to have had the clear side panel,but may buy one later on.Cheaper with price matching. This review was modfied by poster @ 03-19-11 04:07 PM

Comment:
I've been building systems for over 14 years now, and I've never had an easier time than with this case. I no longer dread opening up my case to change or replace cables, or move anything around. Just so much room to get around inside this case. Only downside was that the 8 pin power connector on my seasonic M-12D wasn't long enough to route behind the motherboard.

Comment:
this was my first build and building in the 600t was a breeze, the grommets makes it so neat and the cooling is way better than the pre-built hp i had.