Corsair Graphite Series 600T Special Edition White Mid-Tower Case ATX 4X5.25 6X3.5INT USB 1394 No PS

Comment:
What can I say? This case is beautiful! Very large, great for hiding cables and the large controllable fans are very quiet. Best case I've ever had!

Comment:
I'm stepping down from a much larger Cooler Master Cosmos case, though honestly I don't find that I have any less room to work. The built-in standoffs are probably the best thing since the ATX standard was released - being able to prop in your motherboard without dealing with the finnicky gold standoffs is a godsend.The case is whisper quiet, yet keeps temps very reasonable on accounts of its massive 200mm fans. The fans have built in white LEDs, which look cool but will light up a dark room a bit. That said the fan-speed dial on the front of the case will also dim the lights a bit, if you plan on sleeping... or you could just save your power bill and turn off your machine when you're not using it.

Comment:
This case is big, bold and beautiful. I cannot recommend this case high enough. Easy to work in, looks great.Fan control regulates well, near dead silent. I did replace the fans to boost the cooling for the video cards. Specifically, I replaced the rear black 120mm fan and the top 220mm fan with 3 Xigmatec White LED Crystal 120mm fans. I also added a 120mm fan to the drive cage to help push the air towards the GPU's.

Comment:
great case, huge amount of space for things. only took me 2 hours to completely hook up everything and have everything nicely routed, thanks to the simplicity of the case. though some parts of the case does seem cheap (lock, fraying mesh, alignment of door), would also prefer being provided a 5.25 to 3.5 mesh cover for cardreader installs and stuff, having hard time finding one.

Comment:
I built my first computer with this case and it was very easy due to good cable management. It look great with this black and white finish. I like the easy access to dust filter. I found that fan controller is too much on/off so i keep it on max. Corsair make great product.

Comment:
I have built a lot of computers, and I have to say this case was an absolute dream to build with. Everything went so smooth that by the time I was finished I had to take a step back and make sure I did everything, because it was way too easy. Corsair never fails to amaze me, this screams quality from top to bottom, inside and out. Corsair spared nothing in this case. There is a ton of room behind the motherboard for cable routing, and Corsair makes it easy with the routed holes. Then there was the motherboard cutout behind the CPU cooler, I don't think I will ever use a case without that small feature!I could go on forever, if you are even remotely considering this case, BUY IT! You will not regret it. Pictures don't do it justice, it's just a beautiful case and I can't say enough good things about it. HIGHLY HIGHLY recommended!

Comment:
Simply one of the best case i've ever owned!

Comment:
This is my first ever build of a computer from scratch (usually I just use peoples unwanted computers and combine them) and I have to say, the case is extremely easy to install. I had a 3.5 inch card reader but this case did not come with an adapter. Bought an adapter and fits perfectly but would have preferred for the case to include it especially at this price.

Comment:
The last case I bought was over 5 years ago from the fine people here at NCIX. It was a black Tt Tsunami Dream window version. I loved it for it's good looks and great portability(I LAN quite often). So when it was time to finally look for a new enclosure, I started the hunt many, many months ago. I wasn't finding anything that really looked good, and had the build qualities I was interested in. A few buddies have Corsair cases, and they looked really well put together, great materials, but the often looked like just another case.Started looking at white cases after finding I was bored overall with the same old black. When after considering a Fractal R3 white, I saw a few articles for the white 600T, and was hooked immediately. The price point kept me in check till it hit the right mark, then I snatched it up like zippy zap. The 2 weeks wait after the final click was brutal. I just wanted to play with it like a kid with a new cardboard box. When it finally did arrive, I was all giddy and pleased. Slid it from the box, freed it from the cloth and Styrofoam cover thingies it was wrapped in. The plan was to wait till I could get to my buddies house and we were going to build together(he got some new watercooling toys for his system), but deleys in his order were just to much for me. I had to dive into building it up with my old hardware. Just a few minutes into working with the enclosure I was even more happy with my choice. The amount of room it has over my old Tsunami was fantastic. Getting my bits and pieces in was effortless. Cable routing with the grommet holes and various zip-tie cutouts(could be more of them) went super smoothly. I found under the HDD cages is a small area to stuff any extra unused cabling. Very nice surprise as the little 'box' is enclosed so no wires are seen from the front. All of the fan and front mounted port cabling was long and reached everywhere I needed it to with no issues. The power connectors for any unused fans from the fan controller have a 'cap' so there is less possibility of accidental contact with the metal of the case. This brings me to the fan controller itself. While it does work, the only adjustment available seems to come in the top 10% of the knob. Wide open you will notice the sound of the fans, on low, there is still some noise. I have to stop and pay attention to it however, during normal use I never notice it otherwise.Front audio, USB/1394 header cables are also long and easily routed, however there is no header type cable for the USB3 front port. It uses a standard USB connection that will need to be routed in some way through the case and out to a rear USB3 port on your mainboard, should you have it. I don't, so mine is tucked away inside and shall remain so for some time. Overall, I'm extremely happy with my choice and now have a great platform to start adding some nice subtle mods to make it just pop a bit more. Here are some shots with my first mod added. Pulled the LED strip from a dieing 120MM fan and placed it so. https://picasaweb.google.com/killertek78/Corsair600TWhite

Comment:
This case is totally awesome!!!! It looks great and has lots of versatility to mount all the fans you want and you can put 2 big fat 240mm x 60mm liquid cooling rads in it! The dust filters work great! The computer stays spotless inside! I also love the hard drive array and the versatility for changing the mount further back to mount a radiator in the front of the case.I also like that all the hard drive bays have SSD mounts as well. The case did have enough tiedown tabs for cable management but I had to get very creative with it. I built this computer for my wife but I will be getting another one for myself probably this week! I think it could be the best case, bang for buck out there!

Comment:
This case is one of the most beautiful cases I've owned to this date. Absolutely pleased with this purchase.

Comment:
I worked with a variety of cases from Antec, Silverstone and Coolermaster and I have to say the 600T is the best I've ever worked with. Corsair really knows what they are doing when it comes to case design. I would love to see future versions include a hard drive docking bay and built in SD card reader.

Comment:
I had an Antec 900. After seeing the white 900T on display I fell in love. Couldn't justify spending almost $200 on a case (the black version was $129 at the time). After a couple weeks I bit the bullet when I saw a slight price drop. Either way I don't regret this purchase. Cable management is MUCH better than the Antec.

Comment:
Case looks amazing and fits everything very well. Well thought out cable management. HD tray feels alittle flimsy but minor as well. Fits 6950 with plenty of room to spare.

Comment:
Really good looking and performing case. Price is justifiable once PMed. I opted for the mesh so i can mount another 4 120mm fans for maximum cooling. The stock case fans can be a bit loud but if used with the integrated fan controller, its great. The white LEDs are a good touch lighting up parts of your case for you to see the insides through the window or mesh/fans. So much space to work with, its so easy to computer building. Definitely recommended to system builders with large components (like the noctua D14 or radiators).

Comment:
The case is really nice looking. Its side panel window allows me to see right into the case and adds a sort of neato feeling to it. The material is metal and plastic. You shouldn't worry about it though because they go together fine. None of that cheapo cutting corners where plastic was used just to save money.It has dust filters and removable metal mesh over the case fans. There is a fan speed knob which will change the speed of the fans. The side panels are easily removable by just pressing down on both latches and pulling it out.It will fit just about anything inside it. Theres quite a lot of clearance height left over even after my tall NH-u12p SE2 CPU heatsink is installed. If you are really looking for extra cooling, it comes with a mesh window to install 4 fans on it.After all this, I only have one major gripe with the case. Occasionally it will make some sort of case expansion sound when I first start up a game. It goes away after leaving the computer on for a while. However, don't let this prevent you from getting this case as most people don't have my problem. This is the reason I docked 1 star.Otherwise, it would be the perfect computer case for me.

Comment:
I had to replace my CM 690II after my video cards arrived and I realized they wouldn't fit (d'oh!). Corsair build quality is noticeably better than CM. Great case! I'm very impressed; it's clear that a lot of thought went into the design. The $10 is worth it for the Special Edition version.