HEC 6K28BBX585 Black Computer Case

Comment:
Decent powersupply for a generic create..8mm steel thicknessPrice tag Would like to see a front fan mount techniquefor intake For the value i have no complaints.Came with a psu adequate for me to install a generic create.Did two systems i5 and a i3, h55 & h57 gigabyte mb, four gig ram sets, 1 hd, 1 dvd, low price range graphic card. Something far more on vid card i think you would need to have much more amp on the 12v rail.

Comment:
Great 585W power supplycame with every little thing I necessary wonderful price tagSmaller Case meant for Micro Motherboards None

Comment:
looks wonderful, plenty of space to perform in . as stated ahead of, the three pin cord is of no use, but it does not impact the create. BUT, the DOA power provide did not help still operating with HEC about this as Nerwegg can not RMA due to the reality that i did the punch-out on the optical drives for the create without having bench testing the PSU initially. So i am unable to return it in "As new situation"

Comment:
all wires/front panel items are effortless to read what they are and fit effortlessly on the pins. Plenty of space for a micro case, powerful power supply. No directions what so ever. Terrible case if it's your initial create. If you've built more than one particular personal computer in your life you will like it, just don't let it be your 1st.

Comment:
I bought this unit on sale with free shipping as I was attempting to cut expenses in places other than the motherboard and processor. This was my first build, and it went really smoothly. The situation came with every thing I required and looks sharp. The PSU is quiet and sufficient. Situation fan is also quiet and sufficient. I'm not overclocking or employing a super serious graphics card so I'm not that concerned about cooling. Cable management gets a small messy (but the case isn't see by way of) and the HD was a tight squeeze (good issue my MB came with an angled SATA cable) If I paid complete cost and shipping I might have provided it 4 eggs. What I place in the case beneath...- Gigabyte GA- MA785GM-US2H MB- Phenom II X4 3. Ghz- WD HD- Sony Optiarc DVD-RW

Comment:
Price, space, power provide, no cost shipping and and air movement Sharp edges hidden in the interior, processor cone on case for air escape does not line up with processor on my Gigabyte mobo, no manual, no removable or tool-less drive install For free shipping, this case with the power supply is a hell of a deal. With small youngsters running about the house and being attracted to bright LEDs like moths to flames, the minimalist appear for this case is perfect for me and nonetheless looks glossy enough to be somewhat cool. It didn't come with a manual, but that wasn't a major deal except for identifying the grounds on the wires. It came with more than adequate hardware for mounting. The wires were all labeled as to what they had been. There is a lot of area for a good video card and good air movement. It also feels pretty well built.Just make positive you put your DVD and challenging drives in prior to mounting the mobo, it is a micro ATX case

Comment:
This case is commonly on sale with totally free shiping, you can't beat that, nice searching case with a decent energy supply. Have bought more than ten of these instances and have had no complications. How can there be any cons for a case that sells for this price tag. You get more than what you paid for!!! One particular of these case is at perform where I have three printers. 1 cutter, one back up drive, usb keyboard & mouse, 22in monitor and an external three.5 floppy conected.

Comment:
-Cheap-Power provide is solid and fairly quiet-Case is simple to perform inside, the removable three.five inch tray is a nice touch -Back panel is rivetted in, so there's really no way to get back there-Tricky drives and CD drives rattle, creating a fair amount of noise in this case

Comment:
nice finish, half-way decent power provide, free of charge shipping not the ideal excellent case. Feels like I'm going to pull the front jack out by the roots when I disconnect my headphones. Its not a bad case but not that good either hence 3 eggs

Comment:
Sleek glossy finish, thumb screw side panel, included 80mm rear fan and surprisingly exceptional PSU for the price. I have purchased close to ten of these cases and each and every 1 has been flawless. For the value this case/PSU combo cannot be beat for budget builds. As noted in other critiques the motherboard power LED is 2 wires in a three pronged connector with an empty slot in the middle, this can be simply fixed by removing the cable with a flathead screwdriver and moving it more than one particular slot, will not take away an egg as this is hardly a big fault. Pair this case with a Sempron 140, Gskill 2gb DDR2 800 and a solid micro ATX mobo and you have oneself a high quality spending budget develop.

Comment:
What a excellent deal! This package was recommended by a nearby computer system shop as an affordable but trustworthy case and power supply. They had been suitable. Aside from the wonderful aesthetics, it appears to be a incredibly well built case. The side panel and blank-plates remove and reinstall quite uncomplicated. The fans operate really quiet, too. I'll be recommending this to my close friends and may get one more one for my daughter. Didn't come with any published material at all. This wasn't a difficulty for me at my knowledge level, but a person out there may well need to know how to take the front cover off (that was a bit tricky). Be advised that, even though not a "con," it's darn tight in there when installing or removing the motherboard! I built this for my 12 y/o son, and this was the excellent way to go with no spending a lot of funds. We haven't had any complications.

Comment:
Largely nice case. Very good pairing with the PSU. The case power LED is not the new 'free floating' style exactly where the leads individually attach to two or 3 prong mainboards. This is set in a lead block of two - which suggests if your mainboard has a three prong power LED attachment, you can't spot the pins, and as a result can in no way tell if your machine is running, except for the HDD Activity light.

Comment:
This is fantastic looking, solidly built case. The power provide isn't the greatest, but if you get one that works it more than does the job.I bought this case for an HTPC construct with complete information that the power supply may possibly will need to be upgraded in the future. It has a good glossy black front that doesn't attract your eye or distract from the Tv when watching movies, which was specifically what I wanted. It also has a extremely big round power button with a muted green LED that doesn't burn your eyeballs like some of the blue LEDs I have observed. The HD LED is a muted amber color. I like the big power button because it's large enough to switch on with my large toe.This case isn't super quiet, but it's not a mesh style, so it's quieter than some instances I have employed. I can only hear the fan when nothing else is on. When a movie is playing noise is definitely not noticeable.The steel of the case is thick and mounting anything was straightforward. None If, like me, you're going to use this case with a single hard drive and one optical drive it's nearly best. A lot major sufficient. So far the power supply has worked flawlessly.My favorite items about this case, even though, are the green and amber front panel LEDs that don't distract my eyes from the monitor followed by the massive, effortless to push power button.

Comment:
No back panel to take away, just slap in the 1 from your MoBo.The case's metal edges are rolled, I didn't cut myself at all performing the develop.One of the MoBo mounts is replaced with a pin, it actually assists when lining up the other screws.Mounted power supply is decent, includes 3x SATA power and 1x 6 pin PCIE connectors. Glossy exterior is a dust magnet, although it wipes clean easily enough.1 of the difficult drive bays is mounted sideways with a fast release sled, but the rear of the drive ends up so close to the case that you need to have right angle SATA connectors to squeeze it in.

Comment:
Great Style, Value and Quality DOA / Bad Power Provide

Comment:
This is a wonderful Case with decent power supply. I have built numerous computers using these cases. Power supply has not given any troubles. Not genuinely a con... USB ports in front are also close to every other. For instance, you can not stick two regular USB thumb drivers next to each other. Hope HEC would contemplate it as a suggestion for future. All in all, this is a good purchase. I will acquire it once more.

Comment:
Great combo of case and high wattage power supply at the correct price point. Will let me to upgrade the graphics card and add additional components in the future. Connector for power led is 3 pin, rather of two pin needed for motherboard. Easy remedy was to meticulously cut 3 pin in half with a sharp pair of scissors and connect + and - power led pins individually. Also, only a single drive cage obtainable for tough disks. Would be nice to have at least one additional drive cage for a hard disk. Temperatures stay cool with single 80mm fan and stock cpu heatsink, even with devoted Radeon HD 5670 PCIE two.1 video card with 400W power provide minimum requirement. Overall very satisfied...now if only I could preserve my toddler away from pushing the big power button with green led.

Comment:
The cost with a larger power provide -- yeah, I like to have a little bit additional power in the box, larger power supplies fail much less. Make sure you install the disk & CD drives ahead of the motherboard.1 of the internal three.5 bays is quite close to unusable, at least, if you also want a motherboard, which leaves you with two internal 5.25" and two internal 3.5". Purchased for the BIOSTART TH55B HD LGA 1156 Intel H55 HDMI Micro ATX mother board.Anything is fairly nicely labeled, it's an effortless make.

Comment:
High wattage power supply. Every little thing else. This is the worst case I have ever come across in numerous years of builds. There is no way to get the back cover off, it is all riveted together. I literally had to rip the front cover off to get in to remove the 5 1ǚ" steel plates and cover plates. There is no way to get your fingers underneath the HD/FD carrier to release the back set of clips. I was also unable to release a single of the bottom clip sets. the clips were also big for the holes. I am sure they went in OK, but getting them out was impossible. I wound up prying the friggin' factor off with a screwdriver, breaking most of the clips off anyway. I was so peaved at it I didn't care at that point. Must have sent it back but I wasn't going to pay shipping for a case. Very first piece of junk I have ever bought from the 'egg.

Comment:
Good exterior finish( i'd say better that you can see from pictures),uncomplicated to install the components,plenty of space even is a microatx.The PS run nice and quiet,the rear fan also quiet. None realy. The side vent don't fit exacly (but hey is created for intel mobo),i have a matx board.

Comment:
Almost everything fits. (barely)Sturdy case.Comes with a power supply (which im utilizing and appears to perform just fine for me, doesn't catch on fire.)in my opinion, the case is wonderful looking. =Dit does give sufficient airflow for me, but i only have one hdd, one disc drive, and no video card (built into mobo) Quite tiny space to perform with inside of this case, when it says mini it signifies mini.Though it has 3 hdd bays, the maximum amount of hdd this thing could hold would be 2, as one of the bays is blocked by the motherboard power pin. ( i was only able to get my hdd into the horizontal hdd bay)the front of the case is extremely difficult to get rid of whilst the case is empty, and impossible if you have put all your guts in there. (without breaking it atleast)the power LED under no circumstances worked, but thats not a large deal for me. i would advocate this for a budget build, but not to any individual with multiple hdd. and there isn't a entire lot of room for a graphics card either. but general, im quite pleased. (this was my initially make.) =D

Comment:
Looks nice, vented side with cone for cpu, vented side where my vid card sits, psu operates wonderful. Low-cost price tag decent top quality. my vid card barely fit with the tough drive in place but it functions, i did dent the top rated from choosing it up wrong but that's kinda my fault. Purchased this in a budget combo haven't had any matters yet.

Comment:
-Black plastic is really slick searching-I was in a position to use the optical drive cover panel on the CD tray by connecting it with double sided foam tape so it looks fully slick-Black faced optical drives integrate smoothly in the front bezel-Power supply has two fans and is potent yet quiet-Priced proper-Rubber feet on the bottom don't want to come off -I prefer clipping mechanisms rather than thumbscrews for the side panel-Can't cleanly mount two challenging disks in the upper drive bays-Power button has an indicator LED that is offset to the correct which tends to make it look like a volume dial and upsets the otherwise symmetrical face.-The USB and Audio ports on the front are not really well secured. Flimsy. I can wiggle the ports and they sort've "sink" into the case when I'm pressing a connector in.-There is the cutout outline of a firewire port on the front panel, but no firewire connector. I like it.

Comment:
I'm giving this a fiveǛ basically because I've had it for over a year and this third party power supply is still pumpin' out energy as strong as generally. The case is basic, incredibly basic style, with a piano black front panel, which is good looking as it matches with my piano black Tv. None. I would advocate this case to anybody needing below 600watts of energy and a case for 60 bucks. Extremely superior deal. It's like acquiring a 30 dollar case and a 30 dollar energy supply, both becoming worth more then that IMHO.

Comment:
Case is solid. Functions excellent with micro ATX mobo. Free of charge shipping. PSU by no means workedNo documentation