LIAN LI Lancool PC-K58W Black Computer Case With Side Panel Window

Comment:
Excellent airflow with screens to help keep out dust, incredibly solidly built case. Really simple to put technique together, they thought of anything. Tough drive carriage method is slick, plenty of room to hide your cables for a clean install. I am a major fan of the bottom mounted PSU as effectively. This is only my 3rd construct, but I am sold on Lancool/Lian Li. Fantastic value for the price. Like a couple of others have said, I also had a non functioning power button. I removed the front and leading and sides, and found that the switch is fine. The issue on mine was the switch slipped out of it's mounting location so it was not finding full get in touch with from the energy button itself. Clicked it back in and it has been fine because, took me about five minutes to fix. Bit of a bummer, but not sufficient to lose an egg. It is heavy, so if that is an concern for you, grow a set. When I added the GTX470 (fits with space to spare) I added two more XIGMATEK fans in the top. That was a tight fit with the mobo installed, but I got them both in. You will need to have to acquire the Lian Li fan mounting kit, or just pull the rubber bushings off your additional tough drive carriages. That worked for me just fine.This caseASUS M488TD-V EVOAMD Phenom II X4 955GSkill 2x2GB F3-12800CL8D-4GBRMWD 640GB BlackEVGA GTX470SeaSonic 650W Gold PSU Windows 7

Comment:
Fantastic case, specially for the cost. A lot of space for something you want to throw on here, supports the largest of video cards with ample space. Also has plenty of headroom for aftermarket cooling alternatives. Grommets on the back side for water cooling, if that is your factor. Plenty of cooling with the fans included, plus mounting spots for two additional 140mm fans, and all mesh front, and slotted top. Difficult drive bays are nice, as are the five 1ǚ inch bays, good tool-totally free design, functions great. Key con for me is the plastic front and leading, they come off too easily, the front panel fell of even though carrying the case to my automobile at one point in time, which lifted and pulled the leading panel forward, bending the microphone and headphone jacks in the approach. I was in a position to fix the mic jack, but the headphone jack was salvageable, and I had to get rid of it in order to put the best panel back on. This is the only issue I have had with this panel. The cable management could be much better. With robust cooling, wonderful internal design, despite the fact that a lack of cable management, and tool-no cost style, this case is positive to meet all your demands. In spite of giving me a small trouble, I still rate it at five eggs. Great purchase for anyone.

Comment:
Outstanding toolless styles, straightforward to use and stock fans are good and quiet. cd drive bay latches are a small weak and the power switch is stuck on out of the box. tried to fix it but it kept finding stuck on, used reset button as power. still recommended for a new build

Comment:
High volume of space. The expansion card locking mechanism is pretty awesome. Was broken on arrival. All 4 plastic posts that hold the top on had been broken off. I have to use a Zip tie to hold it on. Upper thumb screw hole for the window panel was dented and attempting to get the screw out ended up stripping the hole. USB\Audio ports on top give it the idea of having the technique beneath you(on the floor) but I would discourage that due to the PSU vent becoming on the bottom. Didn't want to send it back due to the fact shipping would be the expense of most of its worth. I didn't want to wait a few weeks to have a new one shipped to me with the possibility of having the identical troubles and also not getting in a position to build my new system in that time.

Comment:
Good style, wonderful airflow, and solid constructions Heavy and the power button did not work.

Comment:
Adore the tool-less installation system, including the power supply,The removable back panel is great for wiring and airflow,Love the window on the side panel,Reset button is a wonderful notion The LED on mine don't function, but I don't truly careMy main issue with this case is that Lian-Li doesn't have any upgrade parts for it. All of the aftermarket side panels and tops for issues like fans and stuff don't fit on this case. Some of the side panels might work, but the best of this case is really oddly shaped, so absolutely nothing will work. Acquire it, ideal sub 贄 I've noticed

Comment:
Man, exactly where do I begin, this case is wonderful.-I really like that the HDD cage can be rotated 90 degrees. I did that on mine as nicely as removing the un-applied HDD holders to maximize the incoming airflow from the front fan.-The PSU latch holder factor is really handy-- this case really is Fully tool-much less! That latch actually holds the PSU down tight; its not going anywhere!-The cable holders are really wonderful for cable management, and there is plenty of space behind the motherboard to stow away unused cables.-What actually blew me away were the clips for the PCI slots- GENIUS. Every single case must have this very same program! (although they probably won't since Lian-Li has a patent on it :p)-dust filters EVERYWHERE, nicely except for the best-- make certain you install some fans up there!-Speaking of fans, the included fans are actually quiet, you ca hardly notice them. The only things I can feel of are that the power and reset buttons are a bit too sensitive-- I've already accidentally turned off or reset-ed my laptop or computer whilst moving it. Also, the microphone and headphone jacks seem to be a bit tight, I have to push with a bit of force to plug factors in them.Overall, I shouldn't even be mentioning all these things, they are truly trivial and aren't really a bother at all. what are you waiting for? GET THIS CASE!

Comment:
Excellent case. The HDD mounting program is tool-less, speedy, quiet, attractive; the expansion slot tool-much less fastener system is effective and looks fantastic; MB mounting screws are a treat; great cable management, with a small much more room in the cable management wall cavity that some Antec situations I've worked with. The power supply clamp fastener is swee-eet. The case exterior design is understated but also has a look of authority; I appreciate the fact there are no lights in the case interior, and the power LED and HD Activity LED lights are incredibly smaller, which is good. The side panel window is thick and has a good raised, beveled edge. The case is quiet--the loudest component is my low-cost optical drive. I will repeat the design flaw other people have mentioned: the cable routing access hole at the top rear of the right side wall is too close to the case leading panel and as a result unusable, it would have been so nice to route the 8 pin 12V cable behind the MB (I thought about...(cont.) (Pros cont.)...cutting portion of the best panel to make room for the 8 pin connector to fit, but it's not worth it). The heat sink installation cut-out behind the MB is wonderful, but it should be cut 1ǘ" bigger on the front edge, I barely had room to access the mounting holes for my ASRock MB. By the way, the CM Hyper 212+ fits in this case with no problems. The optical drive tool-much less system is flimsy, but it's holding my DVD drives without vibration or noise. The two included fans are sufficient for my present hardware, but it's nice to know I can add two more top fans. There is a washable air intake filter the power supply. Top features: HDD mounting system and PCI mounting method. Cons: It's bigger that and Antec 900 but smaller than an Antec p180; I'm just trying to thing of some Cons. Obviously, if it's cracked and the panels are falling off and the power button is MIA and it has 3 corners rather of four...return it and bill UPS for damages.

Comment:
The setup of the case is excellent. Draws a ton of air by way of the case. Rubberized rails for tough drives, good clip-ins for disc drives. Sturdy, solid. none

Comment:
Solid, nicely built. No hitches at all with the inital build. The electric switch in the chassis that turns the box on keeps falling out of its holder and out of reach of the plastic pusher in the top cover. Therefore, I have to open the cover and get rid of the top to lift it up and restart the machine. I am hopig LIAN can aid with a new switch, but I am not optimistic.

Comment:
This is my first create and I was so fascinated (probably over-fascinated) by the pure usefulness of this case. Some people today complained of the "hardware free of charge" aspect of this case. Sounds like operator error to me. Like I said, this is my first construct and I just thought that every thing was so effortless without having to deal with screws and what not. Not truly a con but it came significantly larger than I expected, my fault for not understanding the sizes of circumstances entirely. Excellent case. Has room to add additional fans on best. I didn't actually do much of a performance build so heat is not a problem for me suitable now.

Comment:
Excellent air flow. Comes with two 120 mm fans which pull in cold air, and blow out the inner case's air (obviously). These fans move quick and quiet. Has two slots on the best of the case for two additional fans. The tool-much less capabilities are amazingly uncomplicated and straightforward to use, even although I secured my dvd-drive anyway with screws.The energy button, headphone/mic jacks, two USB ports and a reset button are at the top of the case, which is actually convenient. I hate LED/flashy cases, so this one was best as it only has 1 modest LED for the energy, and one tiny tiny 1 for HDD. The front fan has a removable filter that gives some protection to the inner case from dust. Wonderful case Not definitely a con, but it doesn't have a removable mobo mount. Case is fairly massive, could be a con or a pro to some folks, but I like the space it gave to perform about inside.

Comment:
LOTS OF SPACE!!!! Genuinely IS A TOOL Much less CASE. Awesome side window, AIR FLOW and lots of it. Have a lot of room for a Larger MOTHER BOARD and A VIDEO CARD And i have like a foot lengthy card so im really pleased with it. Economical,would advocate it to any 1! YA Correct

Comment:
Its ariving tomorrow!I think its tomorrow or 2 far more days!But oh nicely, awsome case anyway! not yet... :)

Comment:
Superb and versatile case, not big by any standard, but was able to fit what I necessary and supply excellent air flow. not the PC-K62 For the cash, If I it to do over, I would have devote a couple of bucks far more and get the PC-K62 version. That getting stated, my complaints are minimal and only really reflect the difference in value over this model. Both cases do the job and offer you an excellent platform to upgrade or build anew.

Comment:
-All intakes have filters.-Fans are somewhat quiet.-Eggcelent airflow if optional fans are installed.-Roomy, superior quantity of space behind motherboard-Excellent cable management, superior than my last (no cab man at all)-Mostly tool-less (Screw driver required for MB, PSU, and five.25 drives in my scenario)-Overall quiet design and looks excellent with window.-Also fits giant Mugen two cooler and Asus engtx460 best perfectly-Got it on sale woot-and much more. -Be aware no external 3.5 drive bays, adapters are required-Energy and HD LED mixing-Energy cable to the atx 12v was a tight squeeze through cable management hole-If only it came w/ the two fans and mounting kits, but I bought separate anyways and still saved $ vs the pc-K62-Can get heavy with all parts assembled-The PCI tool-less mounting did not work with my gpu, I had to eliminate the side bar/rail on the gpu so it would function, but I was going to change the thermal paste anyway-5.25 tool-much less style kind of flimsy, use screws-Grey color interior, but don't mind, easy paint job-Not much else. With all the other mid tower instances out there (I spent hours and hours searching more than several critiques) I chose this one due to the fact price was just proper for the attributes that this case has, particularly filters for all intakes which all other instances lacked and great airflow with significant quiet fans. This case does not really feel complete if you're missing the best two 140mm fans, and I advocate receiving some and the mounting kit from somewhere; in my case I got nzxt 140mm fans and they are eggcellent. This case is truely lian li top quality with a spending budget cost.

Comment:
I got this case fairly discounted with a combo on here not so lengthy ago. I have never been more satisfied with a case I have spent so small on. All the smaller particulars were totally believed out for this case; from the side-mounted drive bay to the rubber grommets that rest between each fan screw and the case itself. Among those grommets and the rubber strips that seal the PSU in, it's incredibly quiet. The cable management holes allow you to maintain the inside of your case clean looking, which is a enormous bonus with that window. There's nothing more tasteless than a windowed case that doesn't come with wire management. The window. I'm not a massive fan, and it appears to create up static electricity easily and has shocked me quite a couple of times now. But this was the 1 that had the combo, so I genuinely can't complain about such a feature wealthy case. This is a significant case, it will dwarf a micro ATX board. It will fit fine though.

Comment:
+Excellent case. Gives wonderful airflow and keeps my components cool.Comes with a 120mm and 140mm fan already mounted!+Cable management is a dream! Comes with mounting brackets to tuck cables away.+PCI-e latches make replacing my video card fast and straightforward without having to mess about with screws.+The 4 three.five" drive bays make inserting & removing difficult drives some thing you can do in literally seconds. Also comes with rubber pads to dampen the vibration noise of the drives. The cage can be rotated 90 degrees if you wish so that the cables face the board rather of the side panel.+Top and front mesh panels have dust covers under the panels. -Side panel window - I still don't like these points, but that's not a con for most individuals.-Bottom-mounted PSU. Not a big fan of these, particularly given the length of cables of my PSU (had to stretch a cable all the way across the mobo!), but that's a subjective factor once again.-Documentation is garbage. Poorly translated, but with some somewhat helpful photos if you're completely lost.

Comment:
Roomy, low-cost, tool much less, simple to construct Power button broke right after powering it up about 4-five times, doesn't make the very same clicking sound it normally does, can't take off the leading with out a a tool I don't have so I can't power on my computer now...fantastic.

Comment:
Roomy case with excellent cable management and amazing looks. Surely designed my greatest develop ever with all cables pretty considerably hidden with behind the motherboard routing and putting difficult drives in with cables towards rear. This was carried out easily via the removable drive bays. Window is quite clear and defect free and truly shows off your handy work. Of course newegg for rates and shipping. Wish I would have painted it black inside before build. Excellent roomy case and fit a coolermaster V8 with a liitle room to spare. Case is a wonderful bang for your buck.

Comment:
+ No installation woes+ Really sturdy, wonderful material utilized - doesn't really feel inexpensive.+ Keeps everything cool+ Window is wonderful+ Cable management+ Can take a Corsair H50 - I don't know why case producers nonetheless do this, but the Power LED cable connector is three prong even though motherboards nowadays take two prong. I completely enjoy this case. I take it on my roadshows to grab attention - the window is wonderful and the case is so properly produced. I by no means when thought about the case throughout install which is a very good factor! It was in no way in my way and the layout inside is excellent. I highly suggest this case.* Intel i7 960* Evga X58* ATI 5870 Sapphire Vapor-X* 6GB Mushkin DDR3* Corsair 850HX PPU* Corsair H50

Comment:
Spacious. Quiet. Very good looking. Be advised this has a slatted best, so if you spill your Coke on it, it's going to flow right inside. Mine is under a table so no worries. I bought the ൙-371-030 ANTEC NEO ECO 520C 520W RT" energy supply to go in this case. It has a major, quiet fan with the correct orientation. Also look at the output amps, that 1 has oodles compared to some in its class. Keep in mind to install the small metal plate that goes in the opening 1st, before you install the motherboard, or you get to do that over once more.

Comment:
Overall I am happy with this case, fairly much what I expected. Does not come with x2 140mm fans on leading like the similar PC-K62

Comment:
+Lots of space, expansion slots+Great airflow, moderately quiet fans+Large dimensions: this factor will fit something you care to put in it.+Looks awesome+Both side panels are removable, creating it uncomplicated to install an HSF+Dust filters are a good touch -The tool-less installation is gimmicky and doesn't feel secure.-Tool-less expansion slot bracket release gets in the way of actual brackets, far more trouble than it saves. Seriously, most men and women can use a screwdriver.-Only four three.5-inch bays: sufficient space for HDD's, but stick some coolers in there and it's full.-The side panels come off too simply.-Manual is poorly translated and pictures don't help significantly. Overall, a satisfactory case. But for ๠ bucks, you can possibly do much better.