FSP Group ATX300-PA 300W Power Supply
VPN: ATX300-PA
Vendor: FSP GROUP USA
Price: $0.00 - $0.00 CAD from 0 stores » Email this product to a friend » Write a review
» Discuss on forum » Post your deal
Vendor: FSP GROUP USA
Price: $0.00 - $0.00 CAD from 0 stores » Email this product to a friend » Write a review
» Discuss on forum » Post your deal
What is on Ebay
Product Specifications
Model | |
Brand | FSP Group |
Model | ATX300-PA |
Spec | |
Type | ATX 12V (v2.2) |
Maximum Power | 300W |
Fans | 1 |
PFC | No |
Main Connector | 20+4Pin |
+12V Rails | 2 |
PCI-E Connectors | No |
NVIDIA SLI Support | No |
Modular Cabling Support | No |
Power Good Signal | 100-500ms |
Hold-up Time | 12.0mS minimum at 115V/60Hz or 230V/50Hz (Full Load) |
Efficiency | > 70% |
Over Voltage Protection | +3.3V (4.6V max.), +5V (6.5V max.), 12V1 (15.5V max.), 12V2 (15.5V max.) |
Overload Protection | Yes |
Input Voltage | 110 - 127/220 - 240V |
Input Frequency Range | 50/60 Hz |
Input Current | 7A @ 115V, 4A @ 230V |
Output | +3.3V@20A, +5V@20A, +12V1@16A, +12V2@16A, -12V@0.8A, +5VSB@2A |
MTBF | 100K hours at 25°C |
Approvals | UL, CSA, TUV, NEMKO, CB & FCC |
Features | |
Connectors | 1 x Main connector (20+4 pin)1 x 12V (P4)4 x peripheral1 x SATA1 x Floppy |
Features | Remote ON/OFF Control:The power supply shall accept a logic open collector level which will disable / enable all output voltage (excluding +5V standby).Over-current protection: +3.3V (66.0A max.), +5V (50.0A max.), 12V1 (27.0A max.), 12V2 (27.0A max.)Temperature range: operating 0°C~50°C, storage -20°C~65°CHumidity: 90~95% RHDielectric strength: primary to Frame Ground 1800 VAC for 1 second, primary to secondary 1800 VAC for 1 second |
Manufacturer Warranty | |
Parts | 1 year limited |
Labor | 1 year limited |