Location: Home > Computers > Components > Computer Cases > AZZA Solano 1000R Black / Red Computer Case With Side Panel Window

AZZA Solano 1000R Black / Red Computer Case With Side Panel Window

AZZA Solano 1000R Black / Red Computer Case With Side Panel Window (AZZA Technology: CSAZ-1000R)
Vendor: AZZA Technology
Price: $0.00 - $0.00 CAD from 0 stores
» Email this product to a friend   » Write a review
» Discuss on forum   » Post your deal
  Store Product Price  

Product Reviews

AZZA Solano 1000R Black / Red Computer Case With Side Panel Window
Very Good
Below Average
Rating: 9.03/10

Review Date: 08/01/13
-good case-appears excellent-decent cost-only a few minor issues-stays cold even although one particular of my fans is going by means of RMA-fits both of my Radeon HD 6950s with a tiny bit of space, I doubt it could match really hard drives in the bays across from exactly where they are, but if you squeezed stuff in maybe-tech help was nice-handscrews -when it was shipped to me the top 230mm fan in the case would not operate the LEDs came on and it would not spin-paint that chips easy it is only minor and truly not even a lot of an issue-the window on the case and the front door feel flimsy and are difficult to get on and off at occasions-on the backdoor even even though I was very careful I need to have turned a screw also far because now it doesn't sit appropriate and just spins with no tension All round a great buy I would have given a four due to the fan, but buyer service was decent and as extended as it operates before also long I'm not worried about it. Worth buying and I would purchase again.

Review Date: 07/04/13
Most anything on this case was pretty very good. The fans are good and extremely silent. Even when the leading fan is set to high. Nothing else genuinely sticks out as becoming so excellent that I need to have to mention it. For this I can say a couple of points. Men and women are raving about the cable management. Personally I wasnt in a position to use it like every person else seemed to. The way its layed out you will need to have some truly long cables to snake them by way of the back. And there also isnt that significantly area in the cable panel. Also as the others have said the paint does chip fairly easy. So be cautious and be certain by no means to move anything ever agian immediately after its been place into place. Every location exactly where I put a screw and took it off has a good ring exactly where the paint was. The other massive factor is that this case wont match significantly larger than a ten" lengthy video card. As soon as the drive bays have HDDs in them and all of the cables are in you just dont have a ton of area for a genuinely big card. Not a con but the truly massive fan on the window panel can get in the way of some coolers. Just before you purchase a single, make certain to read the specs. It cant be any taller than 14 cm.

Review Date: 05/30/13
Will in no way have to be concerned about overheating or something. This issue has so a lot of fans you can just really feel the air coming out to your seat. Super quiet also. Adore it. None.

Review Date: 05/29/13
arrived in 3 days case came in perficate situation.paintjob beautiful inde and out.lots of space to hide cables installed gigabyte amd ud4p mother bordso a lot area to set up any length video card. Ilike the thought that i could install my dvd and a drive on bottom of case. all cables from my trantual 65ow ps have been far more than longenough. none at all verry properly construced and strong will definatly get an additional for next develop wonderful price for such a large case.

Review Date: 04/27/13
-Sleek look-Front i/o panel-Really great air flow-massive inside-bottom mounted PSU -blue energy button-paint scratches straightforward (usually on screw locations)but you wont see that, so other then that just be careful and you'll be fine-The clear panel scratches easy. -My i/o panel did not function when i got the case but their RMA department cleared that up. Great, quickly service also-The best fan has nothing at all to protect against anything from falling through that plastic grate more than it and shooting all more than your laptop.. so you could want to put some screen over that on the inside if your concerned.On the other hand, overall a great case for the price tag

Review Date: 04/15/13
Greatest case I've had over the last 25 years. Painted inside and out,edges are finished and will not slice your finger off. They give you good knurled screws to mount every thing as an alternative of the junky screws. A lot of ventilation, huge fans everywhere. the case has a couple of filter to assist in keeping dirt and White Shepherd hair out. I have some filter foam I am going to attach to the screen filters as a pre-filter. The case does not have hot swap but the hhd cages are very easily removed. Plenty of room for lots of heat creating things, excellent wire management, ready for water cooling or some other cooling technique, overall just a good case at a good value and had a good rebate. None A person with lots of dollars ought to buy me yet another one, or Azza must donate a different red one to me and my dogs.

Review Date: 04/14/13
Gorgeous case, lots of assembly space, ESATA, USB and audio on front. When attempting to take away the upper HDD cage, It conflicts with the ram modules on my ASUS M4A785TD-V EVO mobo, as nicely as the stock heatsink for a Phenom II 555 BE. This benefits in not becoming in a position to remove the whole cage, and gaining access to the screws through the small slots in it is a pain. The bottom cage narrowly squeezes past the mobo, but I have to get rid of the front panel connectors so as not to threat damage. Good case, beautiful, good airflow, HDD cage was a minor assembly setback, and general the assembly was particularly uncomplicated with this 1.

Review Date: 03/09/13
By far the ideal case I've ever utilised. Looks awesome, fantastic airflow all through the case. Removable tough drive bays are great. Cable management is a breeze the holes are lots massive sufficient. If you're pondering about buying this...do it you won't regret it..this point is beastly (very incredibly roomy) Tipped thumb screws are type of a dumb concept. Paint does chip semi very easily so make confident you're gentle. The largest con is that you haven't bought this case but Really like it!

Review Date: 03/06/13
-plenty of fans to move air around-red/black finishing appears truly good-speed controller for top rated exhaust fan-plenty of space(was in a position to fit a tuniq CR-PRO120 cpu fan)-gpu seems to fit in w/ space left for power cable(length sensible)-gpu sits appropriate infront of the fan on the side-excellent cable management. absolutely nothing worth finding an egg ding'ed-they gave you 5.25" -> three.5" converter kit, but not three.five-ɮ.5 converter kit....what in the globe are they thinking? obtaining eight three.five" slot ought to be a lot more than enough :( AZZA really should be a bit additional thoughtful on that idea-paint easily chips off when tightening screw when it was delivered, the box looked pretty beat up, but the case was in great situation....*NOTE*do not place the screws on to tight....i had accidnetally tighten a couple of them too tight by hand, and when i moved the dvd rom to a diverse slot, you can see the red paint been removed/chipped off

Review Date: 03/04/13
Quite spacious, easiest install ever. The two 240mm fans supply superb airflow and are quite quiet. Lots of fan mounts. The 3.five" bays are modular and can be removed. Every single modular bay also has a quiet fan for excelent airflow. Wire management technique improved airflow and avoided tangled wires. The five.25" bays have metal tabs to help installing typical five.25" drives. I had to dremel them off in order to install the hard drive hotswap bays.The distance from the decrease mounted PSU to the usual 12v connector on my ATX board was also far, had to improvise a bit in order to get it connected. The ten five.25" bays present excellent flexibility for expansion. I favor the hotswap bays to the internal 3.5" mounting bays. I applied two SUPERMICRO CSE-M35T-1B to accommodate ten Sata drives.

Review Date: 02/09/13
It costed me 60 bucks following rebates for a full tower with the fans I wanted in it. Great coloring and appears fantastic inside. This was my initial "build" so a lot points I like to other people is typical on cases. There where a lot of scratches where the thumbscrews went in looked like somebody hit it with the drill when they made them. The case also scratches really easy on the side covers, be careful when sitting them to the side.The fans are a little loud, but for 220m fans what do you anticipate. Not a fan of 15 days from obtain to get the rebate in, I ordered on Wednesday just before Thanksgiving took me a week to acquire it. I feel this ought to be extended at least through the vacation season. Was swapping my hp a6110n into this case which was a lot worst case then this and in fact cooled my temps down 20 C inside this case.

Review Date: 02/05/13
Great style, appears really great. TONS of space for expansion. Super simple install. - PSU mounted on the bottom (up or down for intake or exhaust) - Cable Management System behind second door opener, case appears very clean - Style is incredible: - The metal of the case itself appears wonderful, love the black. - Red glowing fans are sexy, tends to make the computer system appear like a actual gaming machine. - Side window to show off the method looks like it's in the correct location - Usability is incredibly good. - The screws are simple to screw/unscrew w/o tools - Mobo fits quite well - HDD cages (there are two separate ones) are really nice - Appreciate the pop out front covers, just pop them in or out when you want to put in a CD/DVD drive or HDD/SSD - Simple plugs for the front I/O panel have been plenty long, but not as well long. They work genuinely nicely. - CD/DVD drive installation was pretty effortless.Want I could write even more about the case. Surely deserves 5Ǜ eggs b/c of its eas Just a few...- SSD mounts didn't operate properly... fortunately I purchased my personal anyway. Mounting HDD was uncomplicated (once you got the cage out.. See under), but not SSD- HDD cage was effortless to get out w/o tools, but took a while. All in all, you had to unscrew 12 screws to get just one particular cage out... 2 for each side door, and four for every side of the cage. That could have been accomplished from just one side of the case and accomplished with 6 alternatively of 12, would have been much better.- Removing the front panel is somewhat annoying. The clip to get it out is slightly underneath the top rated, not much space to place a finger or thumb... and I have fairly tiny hands. Initial time trying to mount SSD. Have only dealt with about six circumstances, but this was BY FAR the easiest and ideal of all of them.

Review Date: 02/03/13
cool caselots of fans high-priced LED's are not as bright as in the picture

Review Date: 01/25/13
- Tons of area- Uncomplicated assembly- Tons of airflow...TONS- Cable management system- Up to 50% of the firm profits go toward charity. That's fairly freakin' great!- Rear exhaust fan speed switch- Lots of assembly screws (way additional than you would want)- Beastly red glow in a dark space! Sucks with my BRIGHT blue Gigabyte CPU cooler although. Would be good to have a red cpu cooler or no color at all - Only one three.5" adapter- The rear exhaust fan is not LED. With almost everything else being colored, it only makes sense to commit a tiny far more and make that a single good and bright also! It would have been nice if they included more 3.5" adapters. It only comes with a single. I knew that ahead of I purchased it but it wouldn't cost considerably far more to include things like at least 1 a lot more.

Review Date: 01/22/13
- Good Air Flow- A three level manage fan- Roomy for the most portion- Red LED lighting is a nice touch- Uncomplicated to take apart additional down really should you want to- Screws no tooless. (Personal Preference, but I like to screws to secure elements.) - Red paint peels a small simpler than some other situations- Cabling set up is fine but it is snug for PSU with extended cables.. so I wish it was a tiny far more organized- SSD mount is a tiny troublesome- Blue light on the power button seems out of location on an Correct light system. Following receiving almost everything place with each other I powered it on and not even five seconds later it started to smoke at the leading, followed by a 1ǘ flame.In a panic, I powered it down... right after additional inspection, the USB set at the top rated was completely melted.I e-mailed the AZZA service and they sent me a new set free of charge. So maintain this in thoughts.. their client service was outstanding despite this flaw.

Review Date: 01/14/13
-The case is certainly silent-Thumb screws for drives/Video Card-Lots of room-Removable drive pays-5 fans ƒx240. 3x120) -None The red glow is very sinister when the lights are off ^_^

Review Date: 11/28/12
Extremely straightforward to install every little thing into this case, and cable management is a breeze. Dropped heat temps a very good ten to 15c. Finger screws for almost everything are a genuine plus. And it is truly quiet, even with five fans. Plus there's a spot in front of the PSU for yet another exhaust fan.Going to be adding some sound activated cold cathode tubes to this for the look I want :) none at all :) I saw a evaluation stating the HDD bay interfered with the ram slot. HDD's don't go in from the inside of the case, you pull the front grill off (which is simple) undo the four finger screws on either side and pull the cage w/fan out the front and set up your HDD's. you have to pull the front off anyway to get the five.25" drive plates out otherwise you break the tabs.

Review Date: 11/18/12
It comes with a box full of motherboard mounting screws that let you attach whatever motherboard size you want. The case also has holes for all various motherboard mounting screws. The box of screws also has tons of additional thumb screws and reusable zip ties for cable management on the back panel. The panel behind the motherboard has slits for mounting zip ties and cables. It could have some kind of amazing latches that I've under no circumstances observed prior to rather of thumb screws? It's not completely manufactured--a incredibly good case, but some of the metal is off on sizing by maybe a third of a millimeter. Sorry about spamming the critique board. I meant to cover this point earlier.

Review Date: 11/04/12
Its really major. it looks nice. all the components perform. extremely heavy. it can also fit extended atx but it doesnt say it. great air flow.the paint is in fact very good. the red isnt as vivid as in the photographs but i dont care. my rebate nonetheless hasnt come. its worth buying.

Review Date: 10/22/12
This case is extremely effectively built. I had never heard of AZZA just before, but I took the threat because it looked like a quality case. It has great airflow, interesting tough drive docks, and a truly cool style. the tough drive bay is cool but it sort of a pain to install. not that bad although

Review Date: 10/20/12
Superb Full Tower None

Review Date: 09/17/12
This case is really roomy and the truth that you can run cables in between the panel and the case makes cable management substantially easier. The setup exactly where you can eliminate the box which homes the hard drives is particularly handy. All round, it is a incredibly good case for the value. None for the time getting. The red on the inside of the case is not as bright as the pictures make it seem to be. Also, I had a bit of trouble placing the side panel back on due to the fact I had some actually fat cables operating by means of the back side of the case for cable management.

Review Date: 09/10/12
Looks awesome, fantastic airflow, can hold lots of optical drives/hard drives, plenty of extra screws. Tricky drive cages are a genuine pain to get out. Couldnt fit my hyper 212 CPU cooler with the side fan, hence the 4 eggs. Not that detrimental but I had to take away the side fan to get it to close. Hold that in mind if your looking at the hyper 212.

Review Date: 09/07/12
Adore the coloring on this case. Great air movement, haven't got anyplace close to worrying about temperatures however. Fairly massive, but expected for a complete tower. The cable management program is not as fantastic as i was hoping. The idea of getting able to run cables in amongst the side panel and the outside cover is excellent, but there just isn't enough space to get some of the power cables in.

Review Date: 08/18/12
This situation is produced of high top quality material it comes with 5 led situation fans and is enormous wonderful buy for the money! Just there are some very sharp edges on the case i cut two of my fingers attempting to pull it out of the box be careful. This case is for a create im doing for a buyer. I wish i had one.
Click Here Show More Product Reviews

Product Features

ATX Mid-Tower Desktop
19 Bays 230mm Fan

Azza Solano 1000R Full Tower Gaming Case
Keep your internal components safe with the Azza Solano 1000R Full Tower Gaming Case. This Tower Case works well with ATX, Micro-ATX, E-ATX motherboard to host a number of components. It also includes a 10x Ext 5.25", 1x Ext 3.5", 8x Int 3.5" bays for integrating a number of drives and cards. The 3 x USB, 1x e-SATA Port allows you to connect to your PC very easily. Featuring 2x 230mm Red LED Fan, 2x 140mm Red LED Fan, 1x 120mm Fan, it circulates enough air flow. Purchase the Azza Solano 1000R Full Tower Gaming Case immediately.

What It Is And Why You Need It:

  • Compatibility; holds your ATX, Micro-ATX, E-ATX motherboard
  • 3 x USB, 1x e-SATA Port; allows easy access, sharing, storage and ultra-fast transfer rates
  • 10x Ext 5.25", 1x Ext 3.5", 8x Int 3.5" bays; lets you integrate a number of devices without any difficulty
  • 2x 230mm Red LED Fan, 2x 140mm Red LED Fan, 1x 120mm Fan; for an optimized cooling system

Product Specifications

Brand AZZA
Model Solano 1000R
Type ATX Full Tower
Color Black / Red
Case Material Japanese SECC Steel/Metal mesh in front
With Power Supply No
Power Supply Mounted Bottom
Motherboard Compatibility Micro ATX / ATX
With Side Panel Window Yes
External 5.25" Drive Bays 10
External 3.5" Drive Bays 1
Internal 3.5" Drive Bays 8
Expansion Slots 7
Front Ports
Front Ports USB / Audio / e-SATA
Cooling System
80mm Fans No
120mm Fans 1 x 120mm Fan In Rear
140mm Fans 2 x 140mm red LED silent fans (19DBA) in front
230mm Fans 1 x 230mm red LED silent fan (24DBA) on top
1 x 230mm red LED silent fan (24DBA) on the side
Physical Spec
Dimensions(L x W x H) 19.70" x 8.10" x 21.50"
Features 3-speed fan switch control
Bottom-mounted Power Supply
Optimized Cable Management
Easy Assembling
USB & Audio Ports Located on Top
Manufacturer Warranty
Parts 1 year limited
Labor 1 year limited
PriceBat.ca is 100% Canadian Own premier price comparison shopping site. Easy to search & compare prices of computer products, electronics and games at Canada online stores.