VPN: F2-8500CL5D-4GBPI-B
Product ReviewsG.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory
|
78%
8%
3%
6%
5%
|
 Rating: Review Date: 09/13/13 |
|
|
Rating: Review Date: 08/12/13 |
Comment:
Installed on a new ASUS M4A785-M/ AMD Athlon II x2 three.0GHz combo bought here at Newegg with out even blinking an eye. Incredibly impressive program! Quite fast!!! Would extremely advocate this product. I have G.Ability in 3 distinct projects of my personal and have had zero challenges! If a lot more persons would analysis more ahead of they bought there elements I'm certain there wouldn't be any terrible reviews on G.Ability, this RAM is good! NONE. If it had been a small much less costly would have made it even superior, but you get what you spend for. As mentioned above, I think most individuals don't analysis there demands adequate ahead of there buy. I'm undoubtedly no guru right here, all I did was investigation advisable RAM at mobo internet website (ASUS) and every thing functions like a charm. Been operating this brand for 2 years now and for the value I don't feel you can beat it! Operating Win 7 x64 with lighting speed for a handful of months now with my 2 year old ASUS A8V-XE and AMD Athlon 64 x2 set up which I also purchased at Newegg and couldn't be happier! I've also installed this brand in a number of costumers Pc's and have by no means heard of, or knowledgeable any difficulties. |
|
Rating: Review Date: 08/07/13 |
Comment:
Incredibly steady memory. I purchased 2 sets so both of my dual channels are running the exact memory but I have place this memory via many battery of tests with no failures. None at this time. If you are working with an older motherboard that could use this memory, do so. Great lat occasions and runs extremely cool. |
|
Rating: Review Date: 08/01/13 |
Comment:
They run at 1066Mhz, 5-5-five-15 automatically, with no difficulty. Heat sinks are nicely built and attached effectively. Clearance concerns with Arctic Freezer 64 Pro and these heat sinks, but I anticipated that when I purchased it. RAM only fits in slots three-four due to the fact of the height of the heat sinks. Need to have integrated a "Pi logo" case sticker in the package. Asus M3N72-D, AMD Phenom II X3 710, Arctic Freezer 64 Pro, 4GB G.Ability DDR-1066, XFX 9500GT, LG GH22NS30, WD 3200AAKS, Raidmax Smilodon w릌w ps. |
|
Rating: Review Date: 07/25/13 |
Comment:
Runs fine, steady, excellent heat sink NONE Mobo detected as ddr2-800, manually transform values on bios to ddr1066 5-5-five-15 and runs fine as promote |
|
Rating: Review Date: 07/17/13 |
Comment:
This memory rocks! I stuck em right and and they produced me genuinely pleased! Even though upgrading from a p4 with 1 gig of RAM...just about anything is an upgrade! Umm...that its not free of charge? Acquire it! |
|
Rating: Review Date: 07/12/13 |
Comment:
I purchased two sets of this memory a handful of months apart. No issues whatsoever, basically plug and play on my ASUS P5Q-E board. Really rapid memory and well worth. None. I like the heat-spreaders on my very first kit greater. |
|
Rating: Review Date: 07/04/13 |
Comment:
This is 1 of the greatest Memory in it class....DDR2 1066. If you acquire it, you will delighted with it! Mainly because it's incredibly stable and efficiency...I go with this memory from a model: OCZ2RPR10664GK, now I just put the OCZ away...hehe... This memory created in high quality...worth your income! purchase it and delight in your game, etc. 1. Rampage Formula MBtwo. G. Skill 4G MMRthree. EVGA GTX 260four. Q6600 @ 3.30five. two of WD6400AAKS in raid The technique is Performance, and extremely steady!!!! |
|
Rating: Review Date: 06/20/13 |
Comment:
quickly , appears excellent , acquire it none |
|
Rating: Review Date: 06/19/13 |
Comment:
Outstanding price tag on an superb product. Promptly recognized by the Bios and correcting installed. (Bios was already manually set to 1066, five-5-five-15, 2.1 V) Not compatible with Crucial Ballistic Memory. Currently had 4 GB of Critical Ballistic Tracer ƔX1GB) installed on an MSI K9A2 Platinum Board and wanted to up it to 6 GB total, by replacing 2 GB of Ballistic with 4 GB of G.Skill. Timing settings had been the identical for both memories 5-five-five-15 at 2.1 volts. GSkill was instantly recognized (Installed alone), as made, but when I attempted to set up the 2 GB of Crucial Ballistic with it in the remaining two slots, the program refused to boot. I moved the memory to all various slot positions but the two different manufactured memories modules would not function with each other. Important Ballistic worked alone and the GSkill worked alone but not collectively. Guess I'll have to spring for an additional four GB of GSkill. |
|
Rating: Review Date: 06/16/13 |
Comment:
Great video card. It's somewhat outdated compared to the most current batches of video cards but for the cash it's the ideal issue I could get. Certainly seeing an improvement in my computers visual efficiency. None as of yet. Didn't anticipate the size of the card compared to the last a single so I had to shift my HDD to a difference spot. |
|
Rating: Review Date: 06/01/13 |
Comment:
Installed and no isssues. technique runs steady. I have just received My G.Ability F2-8500CL5D-4GBPI-B memory a handful of days ago. Right after operating a few benchmarks I noticed CPU-Z and SiSoft Sandra show it to be PC2-6400. I believe the solution I have received has been packaged incorrectly and or not labeled correctly on the box.Under is a direct copy of the CPU-Z data.Memory SPD Module 1 DDR2, PC2-6400 鷐 MHz), 2048 MBytes, G.Skill Module two DDR2, PC2-6400 鷐 MHz), 2048 MBytes, G.Talent I wonder if they have recived a batch of incorrectly marked PC2 8500 from G.Expertise. As soon as I Have the Right Memory and run my benchmarks I will update my post. Manufacturer Response:.Dear buyerPlease maunally set to DDR2 1066 with TCL5-TRP5-TRCD5-TRAS15 and memory voltage 2.1v in motherboard bios. please refer to your motherboard manual about how to transform these settings. According to JEDEC, motherboard can only post at DDR2 800 1.8vThank youGSKILL SupportHigh quality and buyer service are our top priorities.Tech Support E-mail: ustech@gskill.comRMA Dept E-mail: rma@gskill.comG.Ability Forum: http://www.gskill.com |
|
Rating: Review Date: 05/07/13 |
Comment:
Great value, easy set up, nice heat sinks, no clearance problems with Zalman cooler. Working with a GIGABYTE GA-MA78GM-US2H, I required to manually speed to 1066 and timings. Running Warhammer on the web, became unstable. Had to set it back to 800. Runs fine at 800Mhz. Phenom 9950, GIGABYTE GA-MA78GM-US2H, G.Talent 4GB, CORSAIR CMPSU-550VX 550W, ZALMAN CNPS9900LED CPU Cooler, Sapphire 4870 Manufacturer Response:.Dear consumerhave you alter the memory voltage to 2.1v on bios? if you have any situation, e-mail our tech support ASAPThank youGSKILL SupportExcellent and buyer service are our top rated priorities.Tech Help E-mail: ustech@gskill.comRMA Dept E mail: rma@gskill.comG.Ability Forum: http://www.gskill.com |
|
Rating: Review Date: 05/02/13 |
Comment:
G.Talent, quick, outstanding heat spreaders, look awesome. NONE! I purchased this RAM for my final construct about 1.5yrs ago, and I love it. I've usually purchased G.Ability RAM for my builds/upgrades, and have by no means had any issues. I constantly suggest G.Ability to all my good friends. |
|
Rating: Review Date: 04/28/13 |
Comment:
Nicely I purchased this ram to go in the EVGA 780i but somehow I got shipped the wrong mobo and got the EVGA 790i ultra that was packed in the 780i box (weird huh?)But I have to say that the RAM is built good and extremely sturdy.For those wondering, the heatsink does not interfere with putting 4 modules of this RAM side by side so you could have 8gb's of this with no challenge. the heatsink is developed in such a way that if put right subsequent to an additional module it will fit collectively like a puzzle. none system:Evga 790i Ultraq6600 (about to play around with overclockingƜx2gb Mushkin 1600mhz ddr3Andy Samurai CPU coolerGTX 2802x WD 150gb Raptors Raid |
|
Rating: Review Date: 03/14/13 |
Comment:
Good RAM, operates wonderfully. I don't have any challenges with it (but I don't OC). Good value, nice quality. Possibly not a con, but the heatsinks are a tiny oversized. Sort of a tight match on my mobo. It might not be Corsair, Kingston, or Patriot, but GSkill holds its own in overall performance and cost. |
|
Rating: Review Date: 03/04/13 |
Comment:
Bought two sets (total 8gb).Been extremely reputable and a lot more RAM than I currently want. Even for games like Crysis. ASUS motherboard picked up settings on auto extremely simply.No complications. Absolutely nothing genuinely so far. Next upgrade will be a new motherboard, processor, and psu. Currently running an nvidia gtx260 but is not capable to run "full tilt" due to my mid-range processor. |
|
Rating: Review Date: 12/27/12 |
Comment:
Didin't consider id see a lot of a distinction going from OCZ800 to this RAM.Boy was I incorrect,i truely enjoy the quickness off every little thing on my desktop now. Had to make positive voltage in Bios was set to 2.1 for it to see that is was 1066 Ram.Other than that its excellent for my method. Yes the heat spreaders are Major..Im useing an Antec 1200 and a Zalman CPU H/S &fan so its not an concern for me. |
|
Rating: Review Date: 12/26/12 |
Comment:
Strong heat sinks, Good quality RAM None Installed on a GIGABYTE GA-EP45-UD3P LGA 775 Intel P45 motherboard and runs with no problems. |
|
Rating: Review Date: 12/21/12 |
Comment:
It runs rapid and efficient.Cas Latency five Have to set the settings manually to 1066 mainly because the mother board has a difficult time detecting the actual speed. Also as of late windows 7 keeps giving me these blue screen of Death. I have a Biostar 790GXE and just purchased an MSI 890FXA-GD70 mainly because I thought it may well be the mother board acting up. I will soon come across out if the dilemma is actually the memory itself 'cause that is what windows mem test is stating. I like G.talent and usually have utilized them and if it is the memory I will just RMA them to G. Talent. Manufacturer Response:.Dear CustomerThank you for your G.Talent buy and critique. All DDR2 motherboards can only default to DDR2-800 CL5, so for any memory above this, you have to manually configure settings in BIOS. Also, not all CPUs are fully capable natively, so extra tweaks may well be expected as nicely. If you would like help with this, please contact our technical help department directly and they will assistance make your personal computer operate smoothly. Thank youGSKILL AssistanceTop quality and client service are our major priorities.Tech Assistance E-mail: ustech@gskillusa.comRMA Dept E-mail: rma@gskillusa.comG.Skill Forum: http://www.gskill.us/forum/ |
|
Rating: Review Date: 11/26/12 |
Comment:
Works at its rated speeds with its rated voltage of 2.1v .one hundred% stable.I had the DDR2 900 versions of this ram and loved it but wanted 1066 which that ram couldnt do stably.So i sold it purchased this.100%.I virtually went with a total rebuild with DDr3 and a i7 920 and a new mobo.But choose to to get faster ram and cpu and stick with my 775 setup a even though longer.And im really happy with my technique atmCoolermaster CM690Q9650ʄ.0ghzEvga 780i-A1This ram2x Seagate 500gb 7200.11 HD's in raid BFG GTX 285X-Fi Xtreme Gamer fatal1y proCorsair 850TXLogitech Z-4's only con is its DDR2 not DDR3 I like this G Skill PI series ram |
|
Rating: Review Date: 11/23/12 |
Comment:
Fired ideal up to 1066 on P45 Gigabyte motherboard at rated timings. Nice heatsinks. Too tall to use with wide low-profile CPU coolers. G-Ability continues to be my go-to RAM for DDR2 1066 memory for overclocking builds on socket 775 machines. |
|
Rating: Review Date: 11/12/12 |
Comment:
I don't chase that extra 10 percent when it comes to overclocking.But, when I posted the motherboard, the memory showed up effectively with the proper latency. No challenges right here fantastic vaule, fantastic memory! None. |
|
Rating: Review Date: 10/15/12 |
Comment:
Would be Great if it was stable. Cpuid says its 400mhz max. so i consider they just located some setting that made it function at 533 but idk i am sending mine back too many bsod Manufacturer Response:.Dear CustomerWe are sorry to hear that you are having issues with your memory package. When installing memory, make positive to set memory frequency to DDR2-1066, timings to tCL 5 - tRCD five - tRP 5 - tRAS 15 - CMD 2, and voltage to two.10V in your BIOS. If not, the memory will not be operating at total potential and may possibly appear as if it is defective (BSOD).CPUID reads defaults based off your motherboard; JEDEC regular of DDR2-800, that's why it is reading as 400MHz max. Above DDR2-800, such as DDR2-1066 鹕MHz) is known as an Enhanced Performance Profile. As a result requiring manual settings in BIOS. Notice the timing values presented for 533MHz in CPUID, it is stated as EPPş (Enhanced Efficiency Profile ş). When every thing is set adequately, your laptop or computer will be running smoothly.Thank youGSKILL SupportGood quality and consumer service are our major priorities.Tech Assistance Email: ustech@gskill.comRMA Dept Email: rma@gskill.comG.Ability Forum: http://www.gskill.com |
|
Rating: Review Date: 10/03/12 |
Comment:
Quite stable Never had no Complications N/A this ram is Large it was way bigger then my OCZ Gold Suggest this ram place votls at two. not 2.1 |
woof fantastic fast and steady jumped 1100 points on benchmark and i was going up in latency realy good ram didnt acquire sooner