VPN: FN-200RB
Product ReviewsNZXT FN-200RB Case Fan
|
0%
75%
25%
0%
0%
|
With 4 User Reviews
|
 Rating: Review Date: 12/02/12  |
Cons: -Grandeur pas très standard
Pros: -Beaucoup de CFM 166cfm-peu de bruit pour le RPM |
|
Rating: Review Date: 08/05/11 |
Cons: - A bit on the noisy side, but bearable- Won't fit on a Corsair Graphite 600T, not the same "bolt" pattern, but can be fitted with a little bit of imagination
Pros: - Move a lot of air Comment:
Overall, good product, move a lot of air, but draw a lots of watts watch out if you use a fan controller, be sure not to blow it up ;) |
|
Rating: Review Date: 07/23/11 |
Cons: Can be noisy at full speed.White fan blades.Only designed for NZXT cases.
Pros: Moves lots of air and very good static pressure for a 200mm fan. Comment:
I bought one of these at a NCIX store and thought it would be great to get one to replace one of the 200mm fans in my CM HAF 922 case. As soon as I took off the side panel to mount the fan I discovered that the mounting holes didn't line up. Just as I was putting the fan back in its box to take back I decided to use cable ties to mount the fan. Sure enough that worked perfectly! This fan easily outperforms the 200mm fans with a rated airflow of 166CFM and static pressure of 1.82mm. I currently have my case fans set to silent and this fan spins about 50% faster than the CM 200mm fans. Internal case temperature with what I have hovers in the range of 26 to 28 degrees Celsius. I'm hoping of getting two more of these to replace the front intake and top exhaust which will help lower the case temperature. I'm only giving this product a four star rating because even though it's a fantastic fan it's only designed for use in NZXT cases. |
|
Rating: Review Date: 05/10/11 |
Cons: no LEDs.
Pros: it's an air mover Comment:
using this on my phantom case as a top exhaust tied into the fan controller. sure it's a bit noisy when full powered but it makes up for the noise by moving air.installed my own LEDs. had to drill larger holes. |
J'ai acheter cette fan pour me faire un laptop cooler homemade, malgré qu'elle ai briser la premiere semaine, je l'ai bien aimé. Il est a noté que c'est de ma faute si ca a briser, j'ai mis un voltage/amperage trop elevé..