Product ReviewsAtdec Flush Universal Projector Mount
|
48%
8%
4%
0%
4%
|
With 25 User Reviews
|
 Rating: Review Date: 02/26/15  |
Cons: none
Pros: Price, sturdiness |
|
Rating: Review Date: 04/30/10 |
Comment:
Fast shipping, excellent quality, easy to install, solid and flexible. Very great product for the price. Very Satisfied. Would recommend to anyone. |
|
Rating: Review Date: 04/24/10 |
Comment:
Very simple to set up works well with my optoma HD20. the only thing is would be nice if they gave you a little more leway in fixing the projector it seems a little loose and hard to get at the screws while the projector is mounted |
|
Rating: Review Date: 04/05/10 |
Comment:
This little mount worked great for my Epson projector. I needed a mount that was close to the ceiling and was white - this fit the bill. I do wish then included some longer mounting brackets - as I was unable to reach all the available mounting screws (but so far it's quite secure). It took about 15-minutes to figure out how to attach it to the projecter and I did have to take it apart once - but in the end this was a great value and easy to install in the ceiling. |
|
Rating: Review Date: 02/05/10 |
Comment:
Very vague instructions must pay close attention to drawings to get proper alinement for mounting. Not adjustable in length and hard to use if you have a drop ceiling. |
|
Rating: Review Date: 01/23/10 |
Comment:
easy to install, keeps projector steady and cheapest |
|
Rating: Review Date: 01/14/10 |
Comment:
Very solid ceiling mount - -very flexible, easy to assemble as well as easy to remove projector when needed. holds in place very well and adjusts easily. This piece of equipment performs as advertised. perhaps a little over-priced. also for the cost should have probably included the extension (just as many other ceiling mount kits do). |
|
Rating: Review Date: 01/11/10 |
Comment:
Great quality, however, I was unable to use it with the Peerless Ceiling plate. There is no tube routing for the cables. I like the product, but there should be a way to use it with the peerless product and a cable hidden route would be nice! I waited for almost a week for delivery from the Purolator Depot in Peterborough to receive it. It was on the delivery truck and taken back to the depot three times without a call. VERY FRUSTRATING! |
|
Rating: Review Date: 11/27/09 |
Comment:
This mount is tough enough for most projectors. The price is affordable. The instructions were clear and detailed. The quality of the mounts and even the paint were very good. It is quite compact and requires one to use the supplied Allen wrenches to make adjustments in for and aft, left and right angle adjustments. We like the product. |
|
Rating: Review Date: 09/28/09 |
Comment:
I have installed almost 60 of these mounts to a variety of projectors ranging from very old projectors to the new ones on the market. After reading the reviews from the people on here, I wonder how are they talking about this same product. I have installed each projector to the mount in under 10 minutes. The install is so easy, I even had a class of 6th grades learn how to install them for a project grade in my IT classes. I am now at another school and we have bought the same mount and have been installing them with no trouble! Price is great, so is the value and ease of installation. |
|
Rating: Review Date: 09/24/09 |
Comment:
The, Easy Disconnection Point, was brutally hard to remove even AFTER I finally removed the bolt. The projector mounting Allen bolts were factory tightened too tight to loosen so I couldn't even try to mount it to my projector. Totally unusable. Serious quality issues. |
|
Rating: Review Date: 09/17/09 |
Comment:
The mount does swivel in all directions and provides a good number of different sized screws and other pieces. However, the adjustments are very difficult to make. You have to back off a screw then it is too loose. If you tighten the screw too much you can't adjust things. The little arms that attach to the projector are finicky too and tend to move when you don't want them to. |
|
Rating: Review Date: 09/15/09 |
Comment:
Looked like a great mount, except I could not install it. The factory tightened the allen bolts down soo hard, I actually broke an allen wrench attempting to get them loose! This retailer took it back because of their great return service, however, it was for a school installation and I had to go locally to get the project done. If it were not for the install problem it looks like a nice mount. Maybe a little better QC from the factory. |
|
Rating: Review Date: 08/18/09 |
Comment:
I bought this for my BenQ projector. It was a simple setup and didn't take more than 20min to mount it to the ceiling and set my projector up on the wall. It weighs just as much as my projector, but you know it's not going anywhere. If you have a projector, I would tell you this is probably one of the best ones to get, all the hardware is there, just limited instructions on install. |
|
Rating: Review Date: 08/17/09 |
Comment:
What more could i ask for. Easy, secure install. |
|
Rating: Review Date: 07/15/09 |
Comment:
Bought this mount for my Optoma DV-11 hoping it would work as several others I have tried just didn't do it.This one is fantastic absolutely all hardware included to get the job done.Excellent price for a ceiling mount of this quality |
|
Rating: Review Date: 06/25/09 |
Comment:
Plug and play beauty. I have only had one other projector before, but it was more expensive and had worse picture out of the box. I paid 600 on this site for this projector and am totally satisfied. |
|
Rating: Review Date: 03/26/09 |
Comment:
The Telehook Universal Projector Flush Mount is exceptionally versatile, and its works well with most projectors weighing up to 33 pounds. It features a 5-inch minimum distance from the ceiling, and can be rotated a full 360 degrees. This white colored mount also features a quick-release mechanism that allows for easy maintenance and installation. This product is protected by a 5-year limited warranty. This product having nice features and good quality product...... |
|
Rating: Review Date: 01/25/09 |
Comment:
Truly a great, versatile projector flush mount. If you need one, your search can stop here - buy it! In the beginning, I've gone from wooden shelf; to a cheap nylon-and-aluminum pivot ball mount; and finally, to this Atdec mount. Would've been cheaper and must less aggravating if I had just purchased this projector mount from the very beginning. Keep a 6'' crescent set and an extra set of metric allen key wrenches handy to aid in installation. |
|
Rating: Review Date: 12/26/08 |
Comment:
The hardest part of puting up my new mount was a trip to the hardware store to get a stud-finder! Easy assembly, all the parts needed to mount just about any projector, piece of cake! Thanks! |
|
Rating: Review Date: 09/23/07 |
Comment:
I can't say enough good things about this mount! It is well worth the 79.99 for this mount. I bought it with the ViewSonic PJ506D projector. It took me less than 15 minutes from box opening to having the projector mounted. Stare at the direction diagram for a few minutes and then pick the right size screws and spacers and that's about it. Just simple, easy, and it WORKS! :) Very nice and VERY sturdy also. Well made and it looks good; not out of place and bulky. Worth every dime! |
|
Rating: Review Date: 06/04/07 |
Comment:
Well built from heavy gauge steel. Included numerous adapter arms, spacers and screws in different lengths and diameters. I'm guessing this mount would work with just about any projector. It mounts pretty tight to the ceiling so beware of low hanging light fixtures that may be in the way. (I didn't like that light anyway :-) |
|
Rating: Review Date: 05/25/07 |
Comment:
Wide range of applicability - this will literally work with just about any projector. I was amazed it even had the right screws for my machine - I was expecting to have to make a trip to the hardware store. The instructions are a little dificult to understand, but if you look at the pictures long enough, it comes together. |
|
Rating: Review Date: 02/10/07 |
Comment:
I don't know that you could ask for much more in a projector mount: wide degree of pitch, yaw, and roll, and enough hardware to accommodate most projectors. It's pretty intuitive, too. |
|
Rating: Review Date: 01/20/06 |
Comment:
I bought this projector mount for an Epson Home 10+ projector. It was not the easiest to figure out, and the instructions aren't much help, but you need to remember that this is a universal mount. You'll have to make it work for your particular projector, and they provide a lot of parts to help you out. Once it is mounted, it is quite nice, as it has a quick release mechanism to let you take off the projector, and it gives you plenty of rotation in both directions. It is the best projector mount I have seen for the price. |
For $50, this was a great buy. It's not big and bulky, yet seems very sturdy.