ASUS P5N-D Motherboard & OCZ SLI-Ready Edition Dual Channel 4GB PC6400 DDR2 800MHz Memory Bundle

Comment:
ASUS P5N-D nForce 750i SLI Motherboardjust received the board yesturday sadly it didnt boot to the bios(or beep) although the fans and everything where running didnt realy understand that one sent it back hoping this time around it works

Comment:
OCZ SLI 4096MB PC6400 DDR2excellent product. works great with 64 bit windows vista! am planning on getting a second set of this ram.

Comment:
ASUS P5N-D nForce 750i SLI MotherboardI have a BFG 630i and it is still kicking, also have me a 780i TRI Sli, from EVGA, well reviews was all good for it, but check out there site, problems all over the boards, so this is my next board, and I am very pleased and happy with it, Worked right out of the box, had to upgrade the bios before setting up, using the 45nm processor. Even give you the ability to use SLi at x16. One thing I do notice is that the USB's keeps teling me that its not connected to a 2.0 but it is, maybe its my monitor, IDK.

Comment:
OCZ SLI 4096MB PC6400 DDR2Installed into a Dell Inspiron 530 w/ vista 64 home premium and works perfect. You DO NOT need sli to make them work, they will work just fine as long as your MB can take ddr 2 6400 800mhz. Installed it with another set of memory modules (from Dell 2Gigs) and runs fine with them. It seems it would be ideal if I bought another set of 2 gigs to max it out at 8 for top performance. Weird thing is my comp still has a score of 5.5 in memory test...probably due to the dell memory. Still good stuff though.

Comment:
ASUS P5N-D nForce 750i SLI MotherboardI purchased this board and after I got everything hooked up, it didn't boot or give me any beeps. I tried all the tests of different components to find it was a dead motherboard. When I uninstalled it, I was repackaging it and found a rectangular sticker mark on the back. I'm not sure why I got a refurbished or damaged board that was sent 'new' in the box. The new one is on order and I hope the second works.

Comment:
ASUS P5N-D nForce 750i SLI MotherboardJust finished building my PC w/ this board, it's doing great! Im using Intel Q9450, GeForce GTX 260 OC from BFG, 3GB 800mhz RAM, 500GB Hard Drive, Antec 900, 600w power supply, havent tried overclocking (yet), anyway, awesome board!

Comment:
ASUS P5N-D nForce 750i SLI MotherboardArrived on time, works good, no problems, layout is amazing, supports many new products and products to come (like 1333 FSB speed). 2 Way SLI Support, Board does what it should for the price

Comment:
OCZ SLI 4096MB PC6400 DDR2These are high quality and perform amazingly. I used them on my XFX GeForce 8200 mobo with a AMD Athlon 64 X2 5000+ Black Edition Processor. It runs smoothly when playing Battlefield 2142, battlefield 1942, halo ce, Black and white 2, and morrowind.

Comment:
ASUS P5N-D nForce 750i SLI Motherboardbought this to replace my badaxe2. had a problem installing my water block (TT Bigwater). turns out the back plate was touching the solder tips on the back of the motherboard. once that problem was fixed (changed the direction of the back plate) i was able to fire this bad boy up and posted on the 1st try. im OC'ing my Q6600 to 3.6 @ 400 fsb at 1.35 vcore. once again, thanks tiger!!

Comment:
OCZ SLI 4096MB PC6400 DDR2Theirs only 2 words to describe these Simply Amazing i used them on my second build and they are working like a charm! You couldent ask for anything better, i mean who dosent want 8 Gigs of ram for 120 bucks? they look nice to =D

Comment:
ASUS P5N-D nForce 750i SLI Motherboardmy specs: q6600, 2x 2gb ocz 800, asus p5n-d mb, ruby orb cpu cooler, 500gb maxtor hdd, lite-on dvd burner w/lightscribe, pny geforce 8800 gt 512, pc power&cooling 750watt black, vista home premium 64, inside an NZXT tempest case (4 120mm, 2 140mm fans!!). this system runs great, installation was a breeze. overclocking has been limited to 2.8 ghz, not sure why, may just be me (im a beginner oc'er)? other than that, it's great

Comment:
ASUS P5N-D nForce 750i SLI MotherboardI ordered this board for a computer build I was doing and after having trouble powering up, I learned the board was DOA. I sent it back, and figuring it was a good board because of the reviews, I ordered the same one again. Same problem again. I switched to an EVGA board and its working excellently. Two dead boards in a row does not make the product look very good to me, but have your own experiences.

Comment:
OCZ SLI 4096MB PC6400 DDR2Can't beat this for the price. Never given me a problem (hope I dont eat these words later). It also matches the outside of my case (coolermaster Elite 330) really nice with the black mesh. Not that that matters all that much because you can't see it (ha!)but I know its there and its nice. Also going to get another 4 gigs eventually for Vista 64 bit. Dont bother getting two of these (8 gigs total) unless you have 64 bit because 32 bit only supports 4 Gigs including your video card. so if you have 512 meg card and 4 gigs of ram 32 bit will only use 3.5 gigs. Roughly anyways.

Comment:
ASUS P5N-D nForce 750i SLI Motherboardthis is to the dude that bought a power supply, and sent in a review that it only had 23 pins lol, all power supplies are like that,24 pin are for the older mobo's,all power supplies are 23 pin,,lolol,like i say in all my reviews get some knowledge before you review a product,this mobo rocks,bought it for my son,never shut off for a year now without any hitches,Tiger Direct rocks

Comment:
OCZ SLI 4096MB PC6400 DDR2Works like a charm! Running on a BioStar ( built-in HDMI connection M/B) Just upgraded to a Evga 8800GT 512Mb DDR3 Video card, from a 128Mb 6600GT card. Can't wait to get another 4 Gig of this ram. Os Vista Home Premium 64 bit, AMD Dual core 6400, 3.2Ghz. Overclockable,,, but no need to go there. (ram that is) Should improve the following specs... Previous Vista rating: 4.7 Present Vista rating: 5.9 With 4Gig of OCZ SLI ram, 4Gig flash drive Ready-boost and vid card. Will get another 4Gig of this RAM in the near future!!!!!!! Thanks Tiger!!!!!!!!!! :) Rick.

Comment:
OCZ SLI 4096MB PC6400 DDR2Bought mine from a different vendor. Works like a charm. Actually bought two pairs for my 64-Bit ''Super-console'' setup. Overclocks well on the EVGA FTW MoBo, no complaints there either. BTW, they require you to return the whole pair because these are Dual Channel, and they'd be ripping you off if they just gave you a single replacement.

Comment:
OCZ SLI 4096MB PC6400 DDR2Well, one of the modules was D.O.A. Never had this happen before so I don't want to make a big deal of it and give a low quality rating. OCZ is taking it back and will replace. Only issue is if you buy a kit they require you to send the whole kit back. They will not break it up. Whatever. Anyway, the one that did work performed very well. I am sure I will be happy once I receive the replacements. I would still buy OCZ ram again. This was I am sure just one in a million defective products. Figures I got it though.

Comment:
ASUS P5N-D nForce 750i SLI MotherboardI got the board and I couldn't enter the bios! Blank screen! Tried to boot to DOS and reimage the bios and it crashed, bricking the MB. Finally, the emergency onboard bios reflash tool allowed me to flash the latest bios revision in and now it's working perfect. Weird. SATA ports are in exactly the wrong place, gets in the way of video card. They say ''use L connectors''... you can only fit ONE in, it overlaps all the other ports. I dunno... it's working perfect now but I'm definitely not impressed. 1 for quality. 5 for everything else.

Comment:
OCZ SLI 4096MB PC6400 DDR2Got this ram to go with my nForce 750i SLI FTW mobo, E8400 Duo Core and one EVGA 9600 GT, it's certainly kickin ass. I did have a minor problem running this ram in the beginning... Every time I'd boot up to just before my Vista 64 login screen, the system would crash giving me the somethin ''NOT_LESS_OR_EQUAL'' type error... I think it had to do with the memory so I would suggest not running all 4 gigs at once until your OS is completely done with drivers and all that crap. Otherwise, great ram, and most importantly... AGE OF CONAN GAMERS: I get about 60+ FPS in Old Tarantia, that's effing good, especially with only 4gigs of RAM and ONE 9600 GT. I can't wait to see how well this runs it when they finally get SLI and DirectX10 working!

Comment:
ASUS P5N-D nForce 750i SLI Motherboardif any one is still wondering about the 650-750i issue, it is a 750i due to the pci-e 2.0 slots

Comment:
OCZ SLI 4096MB PC6400 DDR2Awesome product, but a word of warning 32-bit versions of window only support up to 4000MB (4GB) of memory, i've got 6144MB of ram now, so i needed to Upgrade to a 64-Bit OS, Windows XP Professional x64 Edition and Windows Vista Ultimate are the only ones for Windows, if you have linux you are on your own.

Comment:
OCZ SLI 4096MB PC6400 DDR2This memory is great, I wanted until I could buy it for $75 and jumped on it. Now its $65!! Highly recommend buying at this price!

Comment:
ASUS P5N-D nForce 750i SLI MotherboardI bought this board last week. It is good and bad. Great features and it supports 16 x 16 PCI-e for SLI, not 8 x 8 like some cheaper boards. This is the main reason I bought it. The board itself is well built, comes with great accessories pack, runs very stable, easy to overclock once you update the bios from the Asus website. You just pick 5-20x overlock, no messing with voltages. However I ran into 2 issues that are a known problem with this board. #1 ..Sata Dvd drive caused my computer to freeze and gave me the blue screen of death. This board will NOT run a sata dvd drive, no big deal really just picked up an LG IDE dev drive for 30 bucks and it fixed the problem. #2 I could not get the realtek on-board sound to work for the life of me, and I have been building computers for 10 years. Messed with it all day until I gave up and just went and bought a new sound card. Still a great board despite these two minor issues considering all the features and future upgrades it supports.

Comment:
ASUS P5N-D nForce 750i SLI MotherboardPUrchased this card from TD on 25 May, received it less than a week later, as expected. I put this board in my Antec P180B Case, which was very tight, and Asus included a padded connector plate which was a good thing as the board fit very tight for hole alignment. Overall, the board is of high quality. The motherboard manual is first rate, but they could do better with regards to the cpu installation. Driver installation was not that smooth, but I got it going. Love the bios setup. Look, if you are looking for a relatively inexpensive mb, but want quality, this is the board. I also run an Intel E7200 Core 2 Duo, 2 g of Ultra DDr2...all bought at TD.

Comment:
ASUS P5N-D nForce 750i SLI Motherboardthis board is good when using anything other then the e8400 if using the e8400 then it sucks for o/c runs hot for the chipset and gives a false reading of over 15' for cpu, great board though. not for overclocker when using the e8400. on a side note. i could not get my 1150 reapers over 1000mhz, i think it's m/b limmited. but i did manage 700mhz 3.3.3.8 2t timing so i can't complain