G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory

Comment:
Plugged them in and set to 1600 on a Asrock 870 AM3 motherboardLifetime Guarantee Dependable which is what attracted me to the brand. none I heard horror stories with OCZ and

Comment:
Works and well. In truth so effectively I bought additional G.Skill RAM the other day. None Truly do I have to clarify how and why it functions?

Comment:
At the time that I bought this ram, it expense ๪. Superior cost for four gigs off DDR3 at the time เ is kinda typical now I guess. Functions at 1333. It gets 1 star since it does not work as advertised. It will not run at 1600 mhz at 1.five volts at 9.9.9.24 Absolutely nothing but bsod all day extended. I will not get Gskill again. I have 3 sets of gskill on different platforms at the moment, 2 are troublesome. The 1st was amazing but 2 poor in a row is sufficient to sour me for ever. NO Quantity OF TWEAKING WILL Allow IT TO RUN STABLE AT 1600, NOT THAT I Really should HAVE TO. PhenomII X3 740 Unlocked 4th core, OC three.5Dual Radeon 4830sWD Black 1 tbThis ramMSI 870-G45Raidmax 730 watt psThermalTake Black Widow CPU coolerAntec 300 case Manufacturer Response:.Dear CustomerThe memory is not stable at DDR3-1600 simply because you are not configuring it properly. With AMD CPUs, you DO NOT raise the DRAM Frequency by way of the multipler. You have to overclock the CPU Bus Frequency to accomplish the higher memory frequency. Here is our guide that may assist you with stabilizing your technique:http://www.gskill.us/forum/showthread.php?t򖳘These are standard directions to accomplish DDR3-1600, but not restricted to higher frequencies. With the appropriate settings in BIOS, your technique will be perfectly stable. If you still have troubles, please really feel no cost to join the forum or speak to us directly for assistance. Thank youGSKILL SupportExcellent and consumer service are our prime priorities.Tech Assistance E mail: ustech@gskillusa.comRMA Dept Email: rma@gskillusa.comG.Skill Forum: http://www.gskill.us/forum/

Comment:
great low-cost ram and appears quick too.simple to set up in bios didnt come with winning mega millions number had 4gb at very first, it went on sale so i purchased 4gb additional, didnt actually require it, but why not!! and g skill just sounds cool doesnt it

Comment:
I got my replacement for my bad chips and It operates good. Just had to have 1 negative chip get by way of.:) I wish they didnt have negative chips mailed out trigger the remailing just adds to loss to the corporation inturn raising price to the consumer...me and you. But 40 bucks for the second fastest 4 Gigs. I'm not complaining.

Comment:
Bought these for a gpu folding box. I have not owned Gskill yet so I am hoping for the best. I had no issues with the build, everything booted fiirst try.

Comment:
Good ram and fast. none

Comment:
It works. Ordered 2 Sticks for my create back in June 2010, just ordered 2 additional for a total of 8 gigs, Huge cost drop! Timing was a bit tricky to analysis and set up back in June. havent even looked at the timing or configuration for the extra two yet :O Just plugged em in and ran

Comment:
bought a 4gb 1600 for my asus mobo. runs ok. not stable at 1600 only at 1333. none Manufacturer Response:.Dear BuyerWe are sorry to hear you are experiencing instability. Please get in touch with our technical support department to troubleshoot this challenge. They will be able to determine the problem and assist you get it up to speed.Thank youGSKILL SUPPORTQuality and buyer service are our leading priorities.Tech Support Email: ustech@gskillusa.comRMA Dept E-mail: rma@gskillusa.comG.Skill Forum: http://www.gskill.us/forum/

Comment:
Run great installed and began with out any hiccup. Posted and enabled 1600 OC on my X48 Platinum which I run at 1333 with lower CL good performance. None Excellent price DDR2 was in no way this great or cheep.

Comment:
Inexpensive ram, fairly rapid. Set at manufacturer spec timings and voltage, comes up at 1600, but each sticks had errors with Memtest 86+, motherboard was GIGABYTE GA-MA770T-UD3, and this ram is on the "approved" list for this motherboard. Attempted altering timings and voltages to no avail. Put ram on an additional motherboard with unique CPU, nonetheless had errors. Newegg is the Best for consumer service. MAKE Confident you test your RAM for a couple of hours ahead of loading your OS!!!! Manufacturer Response:.Dear ClientWe are sorry to hear the memory is not operating properly on your technique. Not all AMD CPUs are fully capable of DDR3-1600 natively. You will will need to raise the CPU-NB Voltage Ʈ.1V or DRAM Voltage Ʈ.1V to stabilize the memory. Once that is done, your program must be stable. If you continue to have a dilemma, please don't hesitate to contact us directly for assistance.Thank youGSKILL SupportTop quality and customer service are our leading priorities.Tech Assistance Email: ustech@gskillusa.comRMA Dept Email: rma@gskillusa.comG.Skill Forum: http://www.gskill.us/forum/

Comment:
I have installed these in 4 systems such as my own more than the last year, and they simply function. All i had to do on install is alter the FSB/DRAM ratio to 1Ɉ and away they go at 800Mhz. Solid performance, not a single failure on any of the builds yet. None

Comment:
Added this set when on sale to an additional set I had for total of 8G. I had read in G.Skill Forum some timings I wanted to attempt. I set these at - 1333 @ 7-7-7-21; 15V. Win7 liked the 8G's of mem, my MSI Motherboard liked the timings and I bumped up my Phenom II X2 555 a click to 34Ghz and it purr's like a kitten(guess I'm not a real overclocker). Ha. I use this for a HTPC. The 4GBNQ was the only heatsinked mem that I could get between my mobo and the difficult drive cage in this matx case. Really, like its proper up against it. I know that a lot of people today have complained about their bio's not selecting it up at 1600 -- that your motherboard's issue. Not the mem's. If a bio update dosen't fix it then you will require to set it manually. If you are so inclined, check out G.Skill's Forum. There is alot of very good facts there.

Comment:
Upgraded with additional 2x2 GB sticks for a total of 8GB on Win 7 AMD 865E. Seamless installation and correct SPD timings in dual channel at DDR1600 after setting in bios. Running wonderful WEI 7.7. None Worried about ordering an extra pair for dual channel but MEMTST results showed no errors. Great value if you want to upgrade from 4GB to 8GB.

Comment:
Does what it's supposed to do. Operating at 1333 instead of 1600 but that's most likely just my program Manufacturer Response:.Dear ClientThank you for your G.Skill obtain and review. DDR3-1333 CL9 is the standard, so this is the highest any DDR3 motherboard can default to. Due to the fact this memory is DDR3-1600, manual settings are required in BIOS. Or if you enable the XMP Profile, it will automatically detect and set the memory for you. For further assistance, please really feel totally free to contact our support department directly. They will be able to get your computer operating at maximum efficiency.Thank youGSKILL SupportExcellent and customer service are our leading priorities.Tech Assistance E-mail: ustech@gskillusa.comRMA Dept Email: rma@gskillusa.comG.Skill Forum: http://www.gskill.us/forum/

Comment:
Rapidly, Cheap, and wonderful warranty if its set up suitable. Bought 4 sets of these for four new pc's. Very first create went fantastic, second build, bsod, lock ups, etc. Read a lot more below. Timings were not right by default. Not positive if it was the rams fault, or the P55 motherboard. Initial create timings were detected as 9-9-9-24-88-5-50-6-12-6-1-10-5-four-7-4-7 and it was 100% stable at 1600Mhz @ 1.61V. The second build timings were detected as 9-9-9-24-74-four-20-5-10-5-1-10-five-four-7-four-7 and would bsod, and freeze all the time. This was the case with the bios settings at "Standard" or "XMP Profile" setting. Would not pass one LinX test at all. I even changed the voltage a tad over the rated max and nonetheless not any improvement. I lastly changed the timings to what the 1st set were detected as and it now works perfectly stable! Passes 100 pass's of LinX with flying colors and thats running at 1600Mhz like they really should be running. Good ram, but it took me a couple of days to lastly find out what the issue was. I do know that these sticks wont run @ 1600Mhz at anything much less then 1.61v. Not in the motherboards that I purchased anyway. All in all, Im pleased with this ram, I just generally never ever have to mess with timings. This is my initially acquire of G.Skill ram, and Im not confident if it will be my last or not. I have two additional computers to finish, and I will see how the other sets function. Fantastic price on the other hand on this ram, I hope they dont dissapoint me as I require to construct two much more computers for my residence besides the two I want to construct for my place of employement, I just may purchase much more if they they hold up. **ATTN To Any person who complains that this ram wont run 򜩀Mhz and operating an Intel i3 CPU. This is a limitation of the CPU and NOT the ram. In order for the ram to run @ 1600Mhz, you will need to have to overclock your cpu. Just thought I would let you know prior to you knock eggs off and give bad reviews.

Comment:
wonderful ram very stable very good price. thanks newegg none

Comment:
- Excellent price/performance ratio- Snappy looking heatsinks- Heatsinks aren't bulky and leave some breathing room in between modules - N/A Purchased to complement a prior obtain of the identical kit for a client's pc. Upgraded the total RAM from 4GB to 8GB for a very reasonable price. (Compatible and utilised with Asus Maximus III Gene). You may will need to verify speed settings in BIOS but otherwise no issues. Mild overclock effective, kept at reasonable speeds for sake of stability.

Comment:
Quick, stable and cool, although it is only operating at 1333MHz mainly because I have but to over clock my processor. None.

Comment:
1. Runs ok at 1333 and 1.5v 1. Doesn't run stable at 1600 and 1.55v.two. Fails POST on reboot at random when I run it at 1.55vthree. Runs too hot when i run it above 1.55v. Manufacturer Response:.Dear ConsumerWe are sorry to hear the memory is not operating to specification. It is odd that you are having such problems. Please really feel free to send the memory in for RMA, the replacement kit ought to function greater. If you have any further concerns or questions, get in touch with our technical support department directly and they will be glad to help you.Thank youGSKILL SUPPORTExcellent and consumer service are our top priorities.Tech Support E-mail: ustech@gskillusa.comRMA Dept Email: rma@gskillusa.comG.Skill Forum: http://www.gskill.us/forum/

Comment:
Works great! none

Comment:
Does the job. 4 stix in my pc and I just put two in my bro's. Works excellent and they're purty! ZERO I had never heard of G.Skill. Bought them a year ago as they were on the list of approved ram for my MB. Encounter was excellent so I got additional for my bro's pc.

Comment:
I was a tad bit worried following I bought this memory, as I had not observed that this memory was tested for P55 chipsets.I am using a P67 chipset.Luckily, this memory is working exactly like it should be. None as of appropriate now.

Comment:
Works excellent at full 1600. Cheap too. Would get once again and my just get two more sticks to bump up my rig to 8 gigs. Nice heatspreaders too. None. Get it!

Comment:
Inexpensive, bought this a year about when it was 贉. I got two sets for two distinct builds I was performing. One set worked, the other set didn't. It would trigger random blue screens. I spent several hours narrowing it down. Replaced via Newegg had to pay shipping and restocking fees. The new set seemed to work and haven't had problems. I have had overclocking problems with this memory also. At stock speeds it is working, but I will not get GSkill memory once more. Manufacturer Response:.Dear CustomerWe are sorry to hear you are getting complications. This is an entry level gaming kit, so overclocking results are restricted. To overclock these modules, make sure to raise DRAM Voltage or DRAM timings to accomplish greater outcomes. If you continue to have issues and require assistance, please feel no cost to contact our technical support department directly. They will be able to guide you with any complications you may well have. Thank youGSKILL SUPPORTHigh quality and customer service are our leading priorities.Tech Support E-mail: ustech@gskillusa.comRMA Dept E-mail: rma@gskillusa.comG.Skill Forum: http://www.gskill.us/forum/