HEC 6T Series 6T10BB Black Computer Case

Comment:
Lightweight.Good finish.Energy switch, buzzer, LEDs all attached with clips, so they're straightforward to move if you want to add a different fan. Metal appears a tiny thin.Challenging drive cage hits full-size video card.Published dimensions don't contain bezel - add 1".Not enough air intakes on front (bezel only has a small opening at the bottom). Involves a loud, sleeve-bearing 80mm case fan. But the case has mounting holes for a 92mm fan, so I place in a good Antec TriCool - considerably much better. The case front doesn't really have a spot for an intake fan, but with some versatile rubber fan mount standoffs, it was simple to add yet another 92mm fan in front of the really hard drive cage.The outcome is a nice looking, cool, quiet, lightweight program. Properly worth the price.

Comment:
SteelAccepts a common ATX energy provide.Front 2x USB two. and eSata ports. Not the greatest in moving heat out - regardless of fan decision. I bought this for my first ground-up, mid-price range build. I'm happy with all except the heat/air concerns.

Comment:
Nice hunting - very good fit and finish. Has the blue energy light, but not as intense as others. I wanted tiny and I got it. That indicates it is a lot more tricky to get it all in there. A essential standoff is supplied to position the mobo for installation. So you don't have to push the mobo back with one particular hand even though you try to screw in the first screw. I appreciate these! I/O shield went in very easily. There is a formed clip that locks the power provide in location so you easily set up the screws. Once again - not the normally holding the PSU in spot with one particular hand and try to install the initial screw with the other. No reset switch. The Energy LED is a 3 pin connector and a lot of mobo's have only two pin. Had to get the dremel out and saw it in half to get it to operate. There are three to two gender changers - but why not just have separate optimistic/negative lines? I have a relatively robust power provide and the extra cables had been hard to squeeze in and out of the way. If all the cd bays are full it would be really challenging. The cooling fan is a little noisy but not poor. Shiney black - so maintain a dust cloth at your desk.

Comment:
Built solid , excellent layout, good shinny front none Genuinely like this case...replaced a massive ATX tower ..almost everything match quite nicely... buy this case if you want a nice neat looking case

Comment:
Got it right now (ordered last night for 3 day UPS typical delivery). It's a cute little case and will fit all I will need to keep on my desktop. (A micro motherboard, two cd drives, a DVI video card, and a major SATA drive. None.

Comment:
Outstanding case for the dollars wonderful finish and newegg shipped it lightning rapid and packaged effectively. New egg rocks they are the only spot I acquire from with good costs and the ideal choice on the net. None

Comment:
I bought this in a combo package with one more item that was going to be purchased anyway; this case was sort of an impulse purchase at an successful price of ฟ with totally free shipping. It turns out to be definitely superb and is worth a lot much more than the amount paid. Absolutely not as excellent in excellent as an Antec, but it characteristics a lot of flexibility for a incredibly smaller, microATX size only, method setup. Following the suggestions of other reviewers right here, the 1ǘ" teflon spacers with 2" Ƙታ"width) machine screws and bolts added Ū to the price, and allow the integrated 80mm fan to be mounted on the inside of the case, facing your video card and assisting air circulation. The challenging drive should be mounted on the swinging 'tray' just behind the on/off switch. I substituted a four pin (PVM) 92mm add on fan (Ű), in the rear exhaust position exactly where the included 80mm fan had been. HEC consumer service was prompt, incredibly useful and complete of fantastic suggestions when I asked them questions in e mail... Fit on the CD ROM drives is Quite tight...

Comment:
Got this free with a 20" widescreen LCD monitor along with a totally free 500w PSU. No challenges with it, every thing fit inside when it when I used both the free PSU and this case to rebuild my old P4 2.53 machine when the old mobo died. None, as it *was* absolutely free. I believe newegg ought to do more bargains where they give away free stuff. I seriously liked getting this case and a 500w psu for no cost and it worked out really effectively when I employed it to rebuild my old P4.

Comment:
Basic however great. Astounding cost, excellent and useability. I have two of these at home. Compact, very light. Made some modifications to these and added a 90mm intake fan in the front of the case by stacking rubber washers to avoid hitting the cables. Also added a 80mm fan to the side vent to cool my sapphire HD 5770. None My Tiny beast.THIS CASEPhenom II X2 three.1ghz Castillo Black Ed. (unlocked to quad)GIGABYTE GA-MA785GMT-UD2H Micro ATX MoboSAPPHIRE 100283L Radeon HD 5770 Antec TruePower New TP-750 750W A-Data 4GB ƒ x 2GB) DDR3 1600 (PC3 12800)Western Digital Caviar Black 640GB 7200 RPM Sony Optiarc 24X DVD/CD Cost: 輌 (Newegg rocks)

Comment:
This is my second 1. Best for a desktop program that permits you to leave it on the desktop. You don't have to open a door to get to the DVD. USBs on the front and a effortless to use Power Button. Fit and finish is excellent. I love the MOBO stand off for a set point - uncomplicated install. Tiny fan on the back is quiet sufficient. Minor - no reset button. You can force a tricky drive in the three.5 bay, but it is genuinely built for only a single drive - which is what you want in a micro case. I had no problem putting the DVD in the major slot - I use the Lite-on smaller type DVD burner - from Newegg of course.

Comment:
Nice Black finish, Looks quite good, effortless to work with, like obtaining a choice to mount hard drive vertical. Only con I could believe of was that when I had my Ram installed and went to install Challenging drive it hit the ram stick and I could not mount difficult drive in its intended slot. This was due to the ram sticks being taller than standard. Thank goodness they had a vertical mount for the drive I could use or I would have been in touble. I just adore this case. I feel it is neat looking and nicely constructed. Considering about purchasing another one particular. Just beware that if you have tall ram sticks you might have no decision but to use the vertical mount for your challenging drive.

Comment:
-Superb workmanship-eSATA port on front WITH cable to motherboard-Adjustable duct for CPU fan-Smaller type factor-Nice HDD drive management technique -No genuine mounting area on front for fan-No reset switch Good daily case for spending budget builds. I have utilized this identical case for about 15 builds so far. Very great construciton throughout and the eSATA is a good touch for external tough drives, and so on.. The face on this case is a high gloss black; so it will show dust, scratches, and fingerprints very very easily. Plenty of ventilation accessible, even with out mouting point for front fan, for a standard develop making use of modern day low watt CPUs. Overall this is a excellent case for the funds and is commonly on sale by NewEgg, often with free shipping! HEC tends to make fantastic spending budget situations, and this is not diverse.

Comment:
Good searching style--not gaudysmaller size and foot printfront connectors nicely situated and contain eSATA if you need it.Rolled steel edges avert cuts.Effortless to assembleGreat for little mATX builds with just a card or two. not significantly at the price tag.I would not try to use numerous cards and difficult drives. glossy black is the in issue and is but prone to displaying dust and scratches--but not a big deal general.the lock loop on the back is a joke--it would cuts with nail clippers.The mother board mount is a bit strange with the single stud pin going in the recess at the middle front of the board. Use the heavier drive variety screws to mount the motherboard. The larger screws (provided) are 6-32, the ones for the case, energy provide and tough drives. The smaller sized screws, M3-.50, may possibly appear like they work for the motherboard, but they are seriously also smaller and you will regret even trying to use them. These are the screws applied for mounting CD/DVD and floppy drives.

Comment:
A excellent deal at ฮ with free of charge shipping. Considerably nicer hunting in individual. Adjustable ㆔mm shroud for any size cpu cooler, and a lower vent for video cards. Has an esata and very firm ports on the front, it isn't the affordable kind of case where the front panels snap off. The back I/O is flimsy and some of the screw holes weren't cut correct so I had to take a power drill and thread them. Got them working, but one of the card slots bent in the procedure, which was also simply fixed. Take it uncomplicated and you'll be fine, I was in a bit of a rush when installing it so I caused myself some troubles. The side vent looks like 92mm, don't quote me on it though. Wouldn't fit an 80mm fan but it was only slightly larger.

Comment:
Looks way superior in individual, exceeded my expectations actually. Hold every thing I require in a nice small size.Feels solid, reading some reviews of other instances they talked about them feeling like they had been produced out of paper, not this a single. Fan it came with is good and quiet.USB ports are youtubtup correct-side up n the front - yea!Every thing I could want for a situation this low-cost, entirely satisfied. two "tooless" screws on the whole point. But not that big a deal to me, acquiring a situation like this you generally put the stuff in it and then forget about it forever.No reset button (?) (can you recall the last time you utilised yours? I can't).Typical sharp edges, two tiny hand cuts in the course of this install(!) If you can't get your blue LED power to work flip the cable, it only works 1 way! On my motherboard the situation was "raised" for like 5 out of 7 screws points, but for the last two I had to use the small brass risers (one peg, one screw in) it to get it seated ideal. Took a few min, but the moment I figured it out, not a massive deal.Never ever had a vertical harddrive mount like this ahead of, but not a huge deal other than the SATA cables are a little challenging to get to, so plug them in ahead of you screw the drive in.Only a small "vent" in the front bottom to suck air by, but it does have CPU side vent + additional grate on the side for additional airflow. Speaking of which the CPU vent is a tiny "off" and "short" for my LGA 775 mini-mobo+the default Intel fan on it.

Comment:
Finest situation technique i have utilized so fare. Effortless to work with and a really great exterior look. none so fare.

Comment:
Good case for HTPC - looks good and is rather smaller. I like the amount of airflow and the truth that the included fan is pretty quiet. Takes a total size ATX power supply but make positive your PS is not also lengthy or it will hit into your Optical drives. About six" is the max length you will want. ฤ for shipping appears high for such a modest cass. This is a wonderful low expense situation for my HTPC. Got it for ษ shipped on BF- Thanks Newegg!!

Comment:
Simple, clean design. Every thing operates wonderful. No fast release clamps to break. Good that it came with eSata, and a fan. Normal ATX power supply will fit. The fan is only 80mm, and the slot fits a 90mm. The front bezel is a fingerprint magnet. Only supports 1 Tricky drive, when the situation certainly has room for additional. The case only has 1 tricky drive mounting point. But if you opt for, a second can be installed in one of the FDD bays. Acquiring IDE cables to perform could be tricky, but I was in a position to manage. If you are working with SATA drives, then it would be straightforward to install 2 drives.

Comment:
- Its fairly smaller, so if you want a good tiny computer thats not gonna take up alot of space, this would perform for you.- The way it layed out, it can fit any size video card even a 5970- Pretty nice glossy finish on the front, the photos dont genuinely do a justice- Not also flimsy like alot of budget cases. Its not going to bend if you put too considerably weight on it. - Cost, its cheap, nuf mentioned. - Its quite smaller, incredibly small room to function with. I had to eliminate the 80mm fan in the back so I could install the motherboard. Also, the space among the energy supply and disk drive was so tiny that I had to take away the disk drive, plug anything into it, and place it back in which was type of a hassle. But if you're getting a mini case, then that is to be expected.- Incredibly small airflow. It came with a puny 80mm fan in the back which moves very small air. You could upgrade it to a 90mm if you wanted. Also there is a port on the side panel that would let one more 90mm fan to be installed. - This situation includes constructed-in stand offs in the kind of small bumps where the motherboard screws in. The thing is, there are only four of these bumps so when I was plugging issues into the motherboard, mainly the 24-pin energy and headers, I noticed the motherboard bent a tiny because it didnt have any support underneath. Didnt cause any situation but meh, I was a small worried. I dont know if this was a motherboard or situation situation, but the PWR LED header was 3 pins for some purpose, and my motherboard only had it for 2 pins. So I couldnt use it. Anyway, this situation will function just fine for what its intended goal was. Its just a uncomplicated computer for my sister built on a extremely tiny budget (踰 like OS). Heres the stats if interested:Athlon II X2 240 2.8ghzAsrock A785GMH렘M AM2+ mobo2GB A-Data DDR2-800 Thermaltake TR2 430w psuASUS DVD-RWHDD from prior laptopWindows 7 House Premium 64-bit

Comment:
Smaller Platform. Fits into tight spaces. Has e-sata on front. Looks sharp. Fan is quiet Only space for 3 three-1ǘ inch drives. Only one particular modest cooling fan. This is great for a modest Computer in a kitchen or for a children space.

Comment:
This is truly a good case for the cost! It looks extremely great in individual and has a gloss black front which is definitely great. Also extremely fantastic structural integrity. The only con is that it utilizes screws for securing the elements in the situation but this is really not a massive deal. It takes a small bit longer to install but not as well considerably of a hassle when considering the fantastic deal for a excellent looking situation.

Comment:
Nicely thought out situation...has almost everything you need to have in a smaller package. Fantastic workmanship and very great design. NONE. Read the other testimonials on how to mod this case.

Comment:
Solid, light situation. Shipping was great - no scratches or dings. PSU casing has a small cushion/dampener to minimize vibration. Utilizes 'mounds' to secure the motherboard, and not necessarily mounting screws. Not actually an challenge even though For me, it was kind of a precarious order of installing components. Be certain to mount your PSU and HDD first, otherwise it gets a small tricky.

Comment:
This case provides a good compact body with affordable space for parts. I transfered an old dell demensions 8200 into it with a new microatx motherboard and it operates awesome. It produced the method run more rapidly due to efficient cooling and it just looks much better than that piece of junk dell. I am incredibly impressed and satisfied with the case and the price that it is being sold for. Dont hesitate to purchase this case if you want a sensible budget situation. none actually. esata plug in in the front of case :)

Comment:
Nicely built situation for Micro-ATX Board, great seeking, and small. It is a little tight, not a lot of additional space. I had to eliminate the CPU fan, in order to insert challenging disk. Great case, just a few quirks.