ICY DOCK MB990SP-B Dual 2.5" to 3.5" SSD & IDE/SATA HDD Bracket

Comment:
Works perfectly. Don't need to have screws to hold it in, but if you want you can go that route. The screwless choice worked properly for me (there are little nubs on the side that pop into the screw holes on most instances) None. It's amazing Read the directions. I bought two of these and didn't read the instructions. I Almost broke the initially one particular since I didn't notice the closed panel could open to let the drive set up less difficult. I saw the instructions with the second bracket and installation was effortless as pie when you do it the proper way :)

Comment:
Fits with my Critical 64gb ssd sata3 drive. None None

Comment:
Straightforward style... It's super uncomplicated to place a single or two two.five" tricky disk or solid state drives into the dock. As opposed to some prior ICY DOCK enclosures (such as ICY DOCK MB882SP-1S-1B 2.five" to three.5" SSD & SATA Challenging Drive Converter), you connect the information and the energy cable from your motherboard straight to the drives rather a separate connectors on the back of the enclosure which is great. Although placing the drives into the enclosure is very straightforward, putting the enclosure into a 3.five" personal computer bay might or might not be very easily based on your laptop or computer situation. Enclosure comes with 4 headless screws attached to the sides of the enclosure. Utilizing a spring mechanism these screws are supposed to snap into the holes of a three.5" bay. They do snap but the spring is not extremely robust to hold the enclose really tightly. To additional secure the enclosure, there are two enclosed headed screws which go into the holes drilled in the plastic siding of the dock.There are two possible problems with this style: Ƒ) The spacing of the headless screws did not align correctly with the holes on my 3.five" personal computer bay. I had to unscrew two of the 4 headless screws to fit the dock into the bay; ƒ) The supplied headed screws had been also small to fit into the threaded metal holes left following removing the headless screws. It would would have been good if there had been four additional headed screws in the package to fit the metal holes on the dock. That's incredibly affordable but really beneficial.

Comment:
Works great I would recommend it! None

Comment:
Extremely cheap. Somewhat flimsy. Spring loading isn't really tight, causing the bracket to slide in and out when installing drives. Lack of a "backplane" signifies that installing drives nonetheless requires connecting cables to each and every drive which gets somewhat cluttered.

Comment:
Basic, properly intended and it performs. Have attempted different types of metal bracket in the past...will never go back! None for me.

Comment:
Then this. The dock operates excellent. Slides right into my tool-less 3.5in bay. With two platter HDs, heat may possibly be an concern with drives stacked on leading of each and every other. There is no area for air to follow among the drives. Making use of an older seagate 160GB laptop drive from my PS3.

Comment:
Works fairly properly, and supports no screw installation if every little thing matches up. Don't count on your rebate although. I was kinda taken back when I got an e-mail along the lines of 'oh, your rebate was late, but we are such a great company we will get it to you anyway!" but then in no way really saw a rebate.

Comment:
Works "fine" for my X25-M and my new OCZ. Good to not hog two little bays for SSDs. As a different reviewer pointed out, on the other hand, your milage may differ.I'm in "tweeking" mode appropriate now, and the more I use this factor, the far better I like it.Straightforward Uncomplicated Uncomplicated to get SSDs in there in the initially place, as long as yours fits.And, of course, two two.five's in 1 three.five bay is nice.Decent cooling separation. Though I'd sure put the SSD I cared most about on leading. Too clever for its personal good. Question no matter if if this is the device for you if you just want to stick a drive or two in there once, and by no means touch it once again. Really quirky ... in terms of how it functions. Specifically if you have an unintentional or lazy cable jungle going on.The screwless fit, for me, is Incredibly loose. If these weren't SSDs, that would be a deal killer for me. Nevertheless, mine aren't mechanical drives. My pc is not mounted in a roller coaster or a cruise ship in choppy water. So for me and my SSDs, the loose fit is acceptable. If you like "easy in and out" for laptop or computer tweeking such as altering SSD arrangements, or even if you have to do it when in a though, it's a quirky unit you can discover to actually like.If you just want to lock and load, and be accomplished with it FOREVER, however, take into account a unique signifies of mounting.

Comment:
Buy Crucial SSD. Fit nicely. hum.. non that I can assume of. Good case.

Comment:
Bought 2, one functions! one broke! Thought = 5 eggs; material = 1 eggMy first RMA with newegg!

Comment:
Fit Perfectly. Effortless to install and recognize how it functions. Holds 2 SSD's. Solid construction for its objective. none

Comment:
Worked perfectly. None

Comment:
Fits perfectly inside Antec 500 3.5 bay region. Just snaps into holes on side, no tightening necessary. None. Very best price tag / performance. I have far more than one of these, holding SSD drives, some with two of them in use per dock.

Comment:
The Price. The reality it can residence two two.five" drives in on three.five" bay. It also has a pretty ingenious no tool installation technique. Havent identified any to speak of. I will be utilizing this for my dual RAID SSD's for OS.Thermaltake Elemant GMSI 890FXA-GD70AMD Athlon II X2 250Corsair H-50 liquid coolerSaphire Crossphire 5770'sCorsair Dominator 8GB 1333 cas 7-7-7-7Corsair HX-1000 PSUSamsung SH-B083L Blu-ray player2x Western Digital 120GB RAID Seagate 1TB Media drive

Comment:
Fantastic that it holds two SSD drives in 1 bay! Wish the bolt pattern was a bit more lenient.... Wonderful product for the $$

Comment:
1.fit into my Antec 300 internal three.5" drive bay securely working with screws that came with my case .two.fit my HITACHI Travelstar 7K200 fairly firmly.3.looks durable and sturdy. I have not identified any cons but at this moment. I would suggest this HDD Bracket to anybody.

Comment:
It works in particular for pc case like the ANTEC sort case format/Layout. None

Comment:
Purchased this for my SSD and it works perfectly! No rattle, not difficult to put together and it fits ƒ) two.five harddrives in 1 bay! none! :D

Comment:
Terrific Price , works well none