OCZ DDR3 PC3-12800 Gold Low-Voltage Edition Triple-Channel Kit - 6.0GB

Comment:
Works as advertised. Step up your uncore speed in the bios to hit the proper ram frequencies and enjoy. Gold heatspreaders look very nice as well. Price is good as well.

Comment:
With all the flashy looking RAM around nowadays, its nice that OCZ still makes a no frills quality set of memory. Put these in my core i7-950, with zero issues. I plan to see how muchI can over clock soon.

Comment:
You can configure it in bios, it's rated at 1.65V but most of the time it runs at 1065MHz at 1.5V. I run it at 1333MHz at the same settings. if you up it to 1600MHz you tend to have to move it up into the 1.7V range usually. not too bad but not really necessary unless you want to have it that high.timings are sometimes off too. supposed to be 8-8-8-24

Comment:
I don't overlock yet but I have never had an issue with OCZ Ram, I used a 4 Gb ddr2-800 (2x2) kit on my 6000+ and it is still going to. I run this Ram on an Asus P6T V1 if anyone is wondering about compatibility.

Comment:
No complaints here... RAM is RAM, and these work in my i7 rig as advertised. Went into the BIOs, tweaked it to the proper steppings, OC'd the bus, and awayyyyyy we go!

Comment:
This is a good buy if you are not looking at special, high-end, overlocking ram. Bought it because it was in my motherboard's QVL, no complaints at all.

Comment:
This ram is great so far. Installed in Core i7 930 system along with a GTX 480 and it works great. Very fast and games run amazing.

Comment:
I used this RAM in core i7 build I was doing. When it arrived I just dropped them in and they were already set at 1600 and good to go, none of then were DOA. I've always been happy with OCZ and will continue to be.

Comment:
Have booted fine in 2 different Asus mobos, just need a little bios tweaking to get them to run at rated speeds. Happy with them otherwise. Bought with a rebate, so far have not yet received it from OCZ (3 weeks later) but according to online status, its been received and accepted, and I dont expect any issues.

Comment:
You need to be an experienced user when setting the proper specs on this RAM. If you are a beginner, dont expect it to run at 1600Mhz unless you know what you are doing. If youre experienced, you shouldnt have any problems with this RAM.

Comment:
NCIX took care of me with a full refund but I purchased some Corsair ram next time around which works perfectly.

Comment:
I bought this memory but I wound up getting a bad stick (failed Prime95). OCZ Support is less than helpful (I'm still working through the RMA process after 3 weeks). You get what you pay for.

Comment:
Some boards are finicky with this RAM. I have an EVGA X58 SLI LE and I had some trouble getting the RAM to run at it's rated speed. That was cleared up by a trip to OCZ's excellent help forum. On my board the RAM had to be set up manually and certain other parameters had to be set. One thing they suggested was running this stuff at 1.65v. I did and almost immediately got errors in Memtest86 (3.4 because 3.5 would instantly lock up when testing began). I backed the voltage off to 6.0 and then the RAM passed with no problems. I tried 6.2v with the same results. Now the weird part; After testing while in the OS it started locking up. I had a hunch that it was the RAM and so I upped the voltage to 6.5 and rebooted. Voila! No more lockups.So you tell me; how can RAM run smoothly at 1.65v in the OS but throw errors in memtest? And inversely, how can it run smoothly in Memtest at 1.6v but cause lockups in the OS? Hmmmmm. Strange stuff, indeed.In any case, I'm not expecting much from this RAM as far as over-clocking is concerned. If it runs at spec I'll be happy but only more time will tell. Strangely enough, I've had this problem in the past with Corsair Memory as well and I'm beginning to think that memory manufacturers are taking it upon themselves to exaggerate the ability of their products. Believe me, after a visit to the OCZ forums, you really start to see that many are having problems with their RAM not running at spec and, in many cases, are getting permission to RMA their RAM. In most cases it simply won't do what it says it can without crazy tweaking. RAM manufacturers are quick to blame the board makers but I don't know...Oh well, four stars for now and I reserve the right to return to update  this review after living with this stuff for a while longer.P.S. This stuff is outrageously priced here so do yourself a favor and PM it. I got it for cheaper than the after rebate price, quite a bit actually. I simply REFUSE to play the rebate game anymore. It's a scam and a hassle so just say no kiddies.I's OUT!

Comment:
These worked great with my P6T MOBO and i7 920 clocked to 3.8 GHZ. They run a little below the rated frequency at that clock and perform well and are rock solid. Details could be provided if requested. These work like a charm.

Comment:
Ram works fast and does exactly intended to do. Pros: -1600hmz at a good price for ddr3 - highly recommend! Cons: -had to manually adjust timings in bios (boohoo for some, not a con for me) my system: -I7 920 at 2.6 (not OC'd) -EVGA X58 sli mobo -OCZ 6GB ram at 1600mhz -Sapphire 5870 -1000w Ultra X3 PSU -SB X-FI Gamer

Comment:
Easy to install, triple channel at its best. Win7 64bit runs flawless with this memory. OCZ has always made great memory.

Comment:
i have those rams about 8 days,. OCZ never disappointed me. the heatsink for the ram is amazing. also the timing is actually 77721 instead of 88824. i love those rams.

Comment:
Pros: Cheap, good timings, lifetime warranty. Cons: No XMP (have to configure by hand, and they don't have the correct configuration anywhere. Hint: use 2T command rate or the memory will throw errors. Also don't forget to set 8-8-8-24 timings and 1.65 voltage). Like everyone else, I got a bad stick and had to RMA. Took about a week for them to issue me an RMA number, but they do offer the option to charge you to send you the replacement kit before you send the original back. I can't get the replacement kit to run at 1600MHz. The best it can do is about 1400, no matter how much extra QPI or CPU voltage I add. Save yourself the trouble and spend a bit more on a Corsair kit.

Comment:
well build ram with some good heat dispersion. got 2x this set for my i7 gaming machine. looks good and o-clocks very nicely. enjoy!

Comment:
I use this to play Crysis at 1920 X 1080 max graphics at 8X AA. Very easy install on the Asus P6T and booted up instantly. Nice color too.

Comment:
Very good product,no problems at all

Comment:
Performs as advertised with an excellent price and quick delivery. Two minute installl and up and running perfectfully since. No reservations about recommending.

Comment:
Just ordered another 6gigs. Been running the first 6 for a year now and have had 0 issues. Fast memory at a great price.

Comment:
I have had this ram for about 2 mounth now i have had no problems have not oc yet i need some more powerful fans pefore i do that. The price is vary well set for the 6 gigs of ddr3 ram. The heatsink plates on the ram look awsome and they spread the keap the temp down. The ram is fast and the heatsink plates look good in a gamers case i have a lot of nice hard ware and i would recomend this ram to anyone

Comment:
Runs perfect on my P6T and i7 920. Very configurable with the right motherboard. Buy this and you will never need to worry about your ram. Did a lot of research to decide on this kit. You don't need more expensive ram as you will not notice a difference.