Rosewill DESTROYER Black Gaming Computer Case

Comment:
Very good amount of space to match my rig into. Fantastic quantity of air flow. Effortless to set up and get going. You remove the front to get in and set up your drive and clean the fan but a small space is there when you place it back on. not a major deal. just an aesthetic issue.

Comment:
Very good looks black undoubtedly looks better in person than in pictures, no surprise there. Lots of fans, fan slots if you need a lot of cooling. Small tray on leading is excellent for putting cds and stuff. good clean setup inside nice room to operate with for the most component. The harddrive rack is kinda silly in the way it goes into the case and mounts and how the drives mount inside the rack itself, but if you doesn't bother you how your drive is mounted once its in and purring along then its not a massive deal. The paint chips off quickly inside but at least there is paint, and will smell up your area with an acrylic smell for the 1st couple of weeks of use. The way the panels hook on and the excellent of the thumbscrews is a small questionable.Could use a filter for the side panel holes I can see dust Bee-lining for the side panel already. If your like me and want a far better-than-garbage case for a decent cost and are capable to look previous a couple par/sub-par style attributes for a decent seeking case this is the one.

Comment:
Good case for the funds. Outstanding airflow. The back fan can be taken off and moved to the top if you install a large aftermarket cooler for the CPU. Installing HDDs is bothersome compared to tool totally free cases. They really should make the HDD cage/bays tool no cost and if you could turn the entire HDD cage/drive bay sideways it would be great.

Comment:
Wonderful situation. At idle the typical all round temp is 27C. (Note: A human would die of hypothermia at this temperature) around 40C max load (you may die of a fever of this temp :( well its a fantastic factor that electronics can take temperatures way higher than this) Had to order three additional blue led fans :) If you want a excellent spending budget situation then purchase this. I don't regret it.

Comment:
Good case for the dollars. It comes with three fans, and has space for additional. The black coating is nice. It has kept my process incredibly cool with out adding additional fans. Fit a total ATX motherboard with no any issues. The front panel really should have been simpler to take off, was type of annoying to take away. Wonderful gaming case for the cash. The touch of blue (led) isn't overkill. I'm digging it.

Comment:
comes with fans, nice light, comes with lots of screws, manual, worked, good case for its value. none removing the tough drive cage was tough for me, perhaps due to the fact it was my very first time making a pc

Comment:
Incredibly easy to put with each other taking into consideration it essentially comes pre-assembled. Lots of venting/fan selections and the hard drive cooler fan does it's job although getting whisper quiet. Some low-cost plastic parts on the case, side panels have a bit of flex. I don't plan on transporting it or moving it around so these aren't actually troubles. I was a bit paranoid about keeping a cool internal atmosphere contemplating my last build a handful of years back blew nothing but hot air all the time. This case tends to make it seriously effortless to cool all elements at all occasions straight out of the box. I would surely buy again for a future build.

Comment:
Black steel, nice space and air flow and great sized case. None except for when I finished hooking everything up inside the case and tryed it it didnt turn on. I don't know why and I don't know if I set anything up in the case incorrect. I need it to turn on but I can't get it to.

Comment:
Quite sturdy, comes with 120 mm fans, has front panel connectors with esata! The tricky drive cage is a good touch. Panels swing out instead of having to line up on tabs. Motherboard mounting is great. Lighted fan, fans are a bit noisy. There's a mix of MOLEX and 3 pin on the fans. I've been creating PCs for 15 years and I've used all sorts of high quality from seriously low-finish low-cost to higher-finish high priced. I would place Rosewill's goods against Antec, Enlight, and so on. any day of the week. This case is possibly the best for the price tag period. The steel is as thick as the a lot more expensive instances. It's not flimsy like a lot of affordable (or even costly!) situations. If this case is nevertheless close to for my subsequent develop, I'll obtain it again.

Comment:
Has space for seven fans. Looks excellent. Like the style of it. Don't know if I'll use the front eSATA port, but it's good to have. Incredibly sleek and for a affordable price tag. 3 day shipping was delayed to four day shipping.Virtually didn't fit in my desk, but that would be my desk's fault for not getting big adequate. I'm an quite satisfied with this case. I like the search of mesh on the front. Hunting forward to the rest of my components arriving tomorrow.

Comment:
Quite cool case general. My customers really appear to like it. The effortless access of the USB and audio ports is great, and the 120mm fans are quiet and nicely placed. Decent construction, though it aint no Antec :) Obtaining applied about 200 Rosewill situations (usually the much less expensive varieties), it's clear to me this is a Rosewill case. That's not necessarily a negative thing, it's just that Rosewill is more of a spending budget builder than a greater end supplier. I often use Rosewill instances for my entry level and mid range desktop Computer's, but rarely for my gaming Pc's. I've begun experimenting with some of their gaming range situations and have been pleasantly suprised. They're not negative. I still primarily rely on Coolermaster and Antec, but if Rosewill continues to maintain prices sensible and put out decent high quality stuff like this, I may contemplate making use of much more of their gaming-range situations.

Comment:
cost, durable, power provide on bottom, looks better than photos, wonderful cooling. loud, fine for gaming, not reccomended for HTPC construct.

Comment:
I bought this situation for air flow. Finding the heat out of the situation is the key element for any construct, no matter if you are over-clocking or not. Since I have employed AMD for several years (before thsy had been common processors) I am accustomed to their heat. The stock fans do a excellent job. This case is really sensible for such a excellent set up. No sharp edges and installation was straight forward. PSU at the bottom of the case is always the way to go. (I chose a Rosewill) The directions that came with the situation were pretty superior, producing it superior for a initial time create. The board I chose had a 12 volt connector proper below the fan at the back of the situation. Removing the fan was essential to comprehensive the connection. (It was a micro ATX board, so look at connection placement) You can add additional fans if you more than-clock your processor. You cannot have as well a lot air in a pc situation.

Comment:
bottom mounted power supplyroom for 4 fans tough drive cage is not sideways all situations really should be that way with a bottom psu superior bang for buck but not a 5 egg situation

Comment:
Great value value for any person developing their 1st P.C. or just for a budget gaming rig. Great black interior which doesn't flake off when scraped against. Plenty of area Fans are low good quality but seeing how it comes with 3 im not gonna complain. Had a little difficulty with my I/O plate fitting. Under no circumstances could get it best but its close enough. Major con is the virtually non existent cable management. It took me a though but i eventually got most of front panel wires, motherboard power, behind the side panel, so it is achievable but its a tight fit. Wonderful value case for gaming rig or just initially P.C. develop. Came with numerous extra screws and such so that's generally great. All in all if your looking for a low-cost, but quality situation undoubtedly gets this one a attempt.

Comment:
1: Good airflow, the included fans are really strong, even though i added 2 additional 57cfm fans to the leading and moved the included fan to the bottom2: Lots of air filters (see consƝ: Extremely nice finishfour. Can support fairly substantially any size PSUfive: Lots of Drive Bays6: Opening in the motherboard tray to make it possible for uncomplicated acces to the back of the cpu for installing aftermarket coolers7: Wire Management is extremely nice for a situation in this price range, there are no grommets or something, but theres a lot of holes in spots to use zip ties to pull wires asideeight: Fans in all the right locations, 1 to hold tricky drive awesome9: with this setup the airflow essentially pulls adequate air by the side vents that installing side panel fans would be a tiny pointlessten: The included rear exhaust fan is extremely powerful 1: The included fans are type of loud, but personally I dont care.2: The connectors on the fans are a bit hard to operate with3: Fingerprint magnet When installing a motherboard make positive you put in the I/O shield in initially from the inside, theres no directions for this. Adding two fans to the prime and moving one to the bottom will make a enormous difference in ventilation

Comment:
Surprising level of top quality for price tag point: fully painted black interior, x3 120mm fans, classy appear with glossy plastic components, epic airflow possible, Sufficient size for modest builds, great front connections. For the money, there is nothing at all to be stated against this case. I must say I get more and far more impressed with every single Rosewill item I obtain.

Comment:
For ำ deal I am suprised! This case has three fans / one particular blue lit, and plenty of room. Component install is a breeze and it has added screws. My first Rosewill and won't be my last. As often I have to say I wish the costs were usually deal day low. Hey, I'm low-cost!

Comment:
The case is a good size, fits a Geforce GTS 250 in it. Comes with three fans and the installation of added fans is incredibly uncomplicated. I like how the tough drives fit into a metal cage that's removable, same with a floppy drive. I forgot to install an IDE cable to my cd/dvd-rom and so I pulled out the floppy drive cage, and reached in that way so I wouldn't have to mess with my PSU's cords. Also a thing worth noting that's a plus compared to some Antec instances from what I've observed, the psu has the alternative to mount the fan downward so it pulls air from outside the situation and via the back, which is excellent for not affecting heat levels in the case or disrupting airflow. Also has an eSATA port in the front which is a plus. Comes with tons of screws! Also, my AMD 1090T sits between 30 (idle) - 42 (gaming, Battlefield Negative Organization 2, Starcraft two, etc...) degrees celcius with the stock cooler. I think this is simply because of the situation enabling so substantially airflow. I won't knock any eggs off of this for any of this, these are just my opinions but based on the value, I can't genuinely complain. One particular con is that the front exactly where your drive goes, the piece that you knock out is a mesh, and so are the rest of the slot covers in the front. I bent the initially and third mesh piece even though popping out the second piece for my ROM. A different con, the manual doesn't really clarify which screws to use for which screwhole. So I guessed on what screws to use on my motherboard, fans, drives, and so forth... I even place the screws aside and counted them to see if any totalled the holes for the motherboard and none did, there were a lot more screws than holes so I guessed. I messaged the manufactorer a few days ahead of ordering this to ask if my GTS 250 card would function. Unbeknownst to me at the time, I'm upgrading to a Radeon 6850 which is at present becoming shipped to me. Rosewill responded to me within 24 hours which is a very good time frame for a question. I haven't tested the Radeon in right here but, but I have no doubts it'll fit. All in all, I'd recommend this situation to about anybody. Also, this case is louder than my last, but I think it is simply because it will allow far more airflow. I game so I've learned not to thoughts sound so considerably due to the fact most of the time I have headphones on anyway.

Comment:
Solidly built chassis. Wonderful ventilation but quiet. Appreciate the blue LED fan although my wife hates it for now, she will develop to love it I just know it. Ample space for peripherals. Presently have 3 HD, A media card reader and CD ROM and nonetheless have plenty of room to grow. Cable management can be a small hard depending on the interface placement on the board. Challenging to put a fan on the bottom of this case contemplating my PSU cables intrude on that space a bit.When taking off the front cover the LED and Power switch connectors are attached. Given that the front cover is a bit tricky to take off but important at occasions the wires can be broken. I know I've done it. Great situation for the price tag, nevertheless I will be calling Rosewill about the LED/PW connectors.

Comment:
Lots of airflow. Fully meshed front panel and tons of fan mounting points make this a great place to install your subsequent air-cooled gaming Pc. Included fans are fairly excellent, if nothing to write house about - that said, you do get a lot of them.Lots of space and configuration possibilities, even for pretty involved builds. The vibration dampening mounting method for HDDs is pretty great, if a bit fiddly.Black finish inside and out is nicely-completed. Overall fit and finish belies it's super-low price tag point. four-bay HDD cage nestles inside three 5.25" bays and will be a bit of a pain to add or remove hardware from right after the initial create.Steel is fairly thin and will act like a sounding board for unruly fans. No devoted cutouts to help with cable routing, even though both aren't unusual at this value point. At the cost they're asking, you can do a whole lot worse than this case - the copious air-cooling choices and the great overall look make this a wonderful selection for the builder on a budget, or can no cost up a bit of extra money to upgrade yet another component devoid of worrying about whether or not your elements will burn up in their new home.

Comment:
Big and straightforward to work on. Lots of space.Ideal element was when I ordered a new heatsink and opened my case to see it had a uncovered section suitable beneath the CPU. Didn't have to take my motherboard out at all. None.

Comment:
-Will hold 11 and 1ǘ inch GPUs-Comes with three 120mm fans will hold four much more-PSU can vent out bottom of case-Solidly built.-flexible, not flimsy-Black inside and out -WHAT? -For โ you get a case that can compete with 贄+ case

Comment:
Picked this up as a March Madness unique for ื and cost-free shipping. This case has fantastic airflow with the standard fans it shipped with. A lot of room even soon after installing the following.MSI P67A-GD65i7 2600kCOOLER MASTER Hyper 212 (barely, and I mean barely fit)ASUS ENGTX480 Power and HDD LED on front are extremely dim. May well as nicely not even have them.

Comment:
The price tag is very good. It has enough space to fit a big heat sink and numerous drives. The installation of the elements is fairly straight forward. I like the built in offsets for the ATX form. I have large fingers and not getting to fit those little buggers into a bunch of holes was great. Removal and replacement of the main panels was easy and I like that they are metal. I like the stupid blue front case fan lighting. Two case footers fell off with almost no pressure becoming applied and are really challenging to replace on the case. The wires for the front panel would have been tricky to run in a manner in which they do not appear haphazard to a buyer if you construct for other men and women. These are fairly minor complaints as it is a spacy case that did not make assembly tricky. I can\'t decide how angry I am about the footers. I had applied a additional upscale Rosewill that I am pleased with that did not have these footers. My construct was for a customer, who thankfully did not mind the problem but if I new each and every case was going to have that situation I don't know what I would consider about it.