Rosewill DESTROYER Black Gaming Computer Case

Comment:
A lot of Room.Wonderful airflow - keeps my temps very low.I like getting the audio & usb prots ideal at the top - really hassle-free to reach. A little bit loud. No way to adjust the speed on 2 of 3 fans - they plug straight to energy provide so no way I know of to manage them. In my residence midwinter there is actually no want to have all three blowing at full speed all the time. (in addition to the PSU, PCU & graphics cards fans)

Comment:
Good case, I didn't assume the fans had been really loud and I am nit-picky about that sort of factor. I was surprised by how cool it kept almost everything with only the stock fans, my processor never broke 30 degrees C and I preserve my house fairly warm. Pretty considerably cable management...which kind of sucks...Figuring out how to place the tricky drive in was sort of challenging, but I figured it out, the directions that are provided aren't a massive support though. It's a great case overall, for a budget gaming create I suggest getting it.

Comment:
Wonderful case, roomy and decent air-flow. Uncomplicated to assemble, my buddy and I put all the hardware in it in beneath ten min. and it's nevertheless running rather fine. The front usb ports are a small picky...but more most likely than not that's due to my mobo. Decent price tag for a great good quality case.

Comment:
I got this case for my initially laptop or computer construct. This case is merely wonderful, Its big and roomy. And my laptop or computer has stayed really cool even with the stock 120MMs. For 50 to 60$ this case can merely not be beat. None Purchase it, You wont regret it.

Comment:
Need to preface, this is a construct for my father-in-law. A economic expert, not a gamer.This is a โ case? Truly?Ok, so this is my initially develop considering that my initial 8080 (cough, cough). But I researched, and a removable drive cage, rubber mounts for drives (and spares!), breathes nicely, all black, eSATA front panel, not too garish, Anything fit nicely. A small 1 watt led flashlight was helpful (black on black) to study the case. Do that Initially, and it all tends to make sense. Front pops appropriate off, just squeeze the pins Ɠ every single side) from the back. The front panel header wires are extended, just lay it on top rated of the case while you function, the switches wont get stressed. I usually have 1" adhesive mounting bases for zip ties on hand, so cable management, although the most time intensive, wasn't that huge a chore. Chose to switch out two of the fans, private preference, see "Cons". Bottom mounted PSU tends to make sense to me. No way this looks like a โ case.And, NE, as constantly, in best condition and Quickly! The front LED fan and leading fan are 2 wire, on Molex 4 pin to the PSU. Not going to more than clock, stuff a giant GPU in there or anything, so I didn't need to have them operating flat out. Replaced the front with a 120mm A***c blue led, and the leading exhaust with a 120mm dual ball bearing, similar brand. Why? power from the PSU, and feedback for control from the MB. Not actually a con, like I said. Individual taste. His customers may not want to hear a Huey (most of you won't get that). Just wanted it quiet, like an HTPC. This create (entirely NE)Absolutely nothing is Future Proof, but right here's a attempt at a few years.MB:Gigabyte GA-880GMA-UDM2, 880뫪CPU: AMD Pii X4 840, 3.2Ghz RAM: G. Skill F3-10666CL8-4GBHK, CL8OS/App HD: Caviar Blue WD 500GB, 6Gb/sData HD: Seagate Barracuda 1TB, 6Gb/sOD: LiteOn iHAS-324-98B, 24XPSU: Rosewill RG-430-S12, single rail 80+Case: Rosewill DestroyerOS: Win 7 Ultimate 64 BitExt Storage: WD 2TB eSATA

Comment:
I have had completely no problems with this case what so ever!!!!All the cables fit, buttons are fantastic there is no issue! wish there was a side window but who cares! This is a wonderful low budget case!

Comment:
Excellent starting case, or a case for a different individual whom you are creating for. Lots of fan ports, of which several are filtered to stop dust intake. Not too noisy either.Nice finish all about with the black coloring.Front panel is quickly removed and not damaged (shocking) even though reorganizing wires/fans/drives. The audio out and mic in on the front panel are nearly in the way, not very a con but personally would prefer them to be at least another inch away from the top drive bay.The internal 3.5" drive bay is a bit awkward to perform with soon after the MB (used a Mid sized ATX) is installed, as a tip, do all your drive installation (without running wires) just before installing the MB would definitely buy this once again.

Comment:
Inexpensive "relatively"Looks goodBottom mouted PSUPainted black in the insideThumb screws included for case covers Kinda low cost bendy steelLoud fans "they do move alot of air though"HDD cage is sorta a discomfort to useInexpensive plastic partsno wire management This is Truly a HEC "Compucase" Blitz Black Steel Edition case rebranded as a Rosewill brand case.

Comment:
I ordered two of these to construct a matched set of computers. The case is black inside and out. It is not the heaviest case available, but it is not flimsy either. The front fan lights up a good blue. The leading fans on each circumstances do not light up at all. There are plenty of screws for mounting hardware and a cage is included for mounting 2.five inch difficult drives. The front panel includes 2 USB ports, mic and headphones and a sata port. The cabling for these was less complicated to connect that circumstances I have used in the past. USB ports were merely a typical USB plug. The case is black inside and outside. The screws are also all black. For old eyes it can be a bit tricky seeing the screws if you drop on inside the case. Maintain a flashlight handy. I'm rather pleased with these cases and I got a good deal from Egg. I checked he competitors but no 1 came close to the price tag. Thanks Egg.

Comment:
Low Profile, All black Screws, Non-Conductive center pin, Blue L.E.D Principal fan. Super spacious for nearly all motherboards, as well as Graphic Cards like Nvidia. Fantastic case for concealing wires allowing maximum airflow through the case. A number of drive bays for DVD/DVD-RW etc. The case panels come apart super straightforward giving you a 360 degree view of the inside and out. Plus comes with three Fans, and 2 ports for you to add two a lot more if you want. Really simple access to every spot in the case, thanks to the removable panels. Honestly, I am a tiny upset it didn't come with any Twistie-tie's (Tear) It would have been good so I can conceal my wires and cables, rather I had to acquire some. Its an all about wonderful case. I do not regret purchasing it at all.

Comment:
This case is excellent. There was plenty of space for an ATX motherboard and every thing seem to fit appropriate into spot.A lot of air flow by way of the complete case with the stock fans that come with it. The energy / reset buttons really feel kind of low cost, but absolutely nothing to seriously complain about. Overall for the value, I consider it is an outstanding case.

Comment:
Lots of bays and fan slots? A case is a case except when it sucks like this one. The case was hard to build with, requiring two folks to get the mobo in (one pushing it more than the holes since it wasn't aligned adequately). To get the mobo face plate on, the back fan also has to come off initially which was annoying. Soon after much less than a year the fan for the tricky drive bay has stopped working, and earlier this week the black pin protector on a single of the two front usb ports popped off - this properly makes it useless given that to get anything to work, even just chargers, you now have to hold the cable up whilst it's plugged in. Soon after receiving this last August, I wish I had gotten a diverse case and hadn't just been tempted by the large number of fan spots. Do NOT get this case.

Comment:
Good seeking case. Solid construction. Cool blue lights. Three fans. Lots of screws. For the value it is difficult to beat. Assembly was simple. I wish the wiring for the power button was secured with tape or glue. While removing the front cover I guess I wasn't careful and the wiring came off the power button. I had to repair it. Hope it holds. Be cautious when removing the front cover. Still a extremely good case

Comment:
Spacious, lots of bay for your five 1ǚ & three 1ǘ drives. EZ to install. Come with 3x 120mm Fans... can't beat that... not to mention they are mounted directionally correctly for great air flow, front bottom (LED Fan) in, back and top rated out (Power Provide, back fan, best fan)... and there are much more location to mount far more fans... it's Excellent. XD Back fan DOES get in the way when you're attempting to put the MoBo in... but not bad adequate that I have to take the fan off. I also don't like how the front panel manage wire comes in from the top front corner of the case... type of acquiring in my way when putting components in... but no biggie. The Mobo POWER pin comes in 3 pins connection rather of two (what most mobo takes) If you look closely, the middle pin location is empty, just take a tiny screw driver, eliminate the one pin and put in the middle to fit your mobo, please make confident your ground and hot wire is in the correct connection to mobo.

Comment:
Great look, mucho working space, no sharp edges. All the hardware you could need to have and all painted black. Be carefull of the switch wires. Won't take substantially to destroy switches. I have used brand name instances that where not designed or produced this nicely.

Comment:
Great steel construct, best for the budget buyer who nevertheless wants to push their laptop or computer for gaming, but also ideal for the average user, several fans/fan alternatives make for a incredibly cool (in both approaches) technique. The back fan came with a motherboard connector rather of the regular power provide connector. not much of an issue but besides that? best case A lot of room for anything I need and lots of airflow. Shipped very quickly THANK YOU NEWEGG

Comment:
Effortless set up. This was my initial create and I had no complications with the case. Great air flow for cooling and not to mention the LED light adds a great look to the case. The fans are a small loud. But then once again, I have the case sitting 1 foot away from my ears. Wonderful case for the cost. I have no complaints.Lets bear in mind, you get what you pay for.

Comment:
Every little thing worked It was a little complicated to align the keyboard appropriately with the motherboard. Screws were always off with the three boards I tried. Ended up leaving a couple unscrewed Looks like a gaming case, expenses as a lot as a regular case

Comment:
Straightforward to put together and lots of space for a mid tower. Room for 6-7 fans Ɩ in my case). Very Durable Paint, and no problems with any of the wiring durability wise. Not wide adequate to fit a 120 cooler with the side fans in. I could only fit 6 120 fans inside my case due to the fact the XFX powersupply was oversized.

Comment:
Surprising good quality at this price point. Fit and finish are superb, incredibly little plastic (sides of front panel and top). Front mesh drive covers are metal and quite sturdy. Side panels come off incredibly effortlessly utilizing a clever "hinge" program.A extremely discreet, fantastic-seeking case IMHO.The capability to mount 7 fans in this thing enables you to use lower-speed, hence quieter fans. Included mesh filter on the bottom intake fan position and foam filter in front bezel to manage dust.Bottom-mounted power supply can be mounted with internal fan facing up or down, as you opt for. Some genuinely high-priced instances I've utilized don't allow this! The thickness of the metal is definitely not Antec or Lian Li normal, but the case is sturdy as soon as assembled. The greatest concern is with the screws: either the screws or the case metal are quite soft (haven't figured out which but) and very simply stripped after a couple of in-and-outs. So purchase a fantastic set of thumbscrews along with this case--you'll require them. Yes, the fans are junk, but seriously, I have bought 贄 Antec and Lian Li cases and swapped out the fans. The way I appear at it, for the income you are saving on this case, you have paid for 5 or 6 high-top quality fans. I've bought 6 Gentle Typhoons for this and the case is cool and practically silent with a Xeon processer and two Quadro graphics cards (hot, hot components!!).The removable 3-bay hard drive bracket (which has an attached fan) can be positioned anywhere along the front bezel, permitting you to add a second front fan where you want it. Only problem is that I haven't but figured out how to mount a second one, and the instruction booklet provides you no clue.Did I say how considerably I like the look of this case?

Comment:
-Looks cool-Very good ventilation-Lights-Decent size -Poorly developed in the back installing cards and such-Slightly Flimsy-Front panels break straightforward Looks cool and room for expansion. Not poor for the value.

Comment:
So far it has been in a position to hold all my upgrades to the method, has good air flow, and looks cool. Not certain how I did this but all my internal parts with Light are blue and so it offers off a really cool light when the lights are out. (Power provide, Fans, Video card and so on) Front panel is a little tricky to take off, could just be me. And 1 of the brief leg/support thing fell off on the proper front. Operator error when I tried to scoot it just a bit on carpet. None other than I really like it. I keep upgrading my technique and always browse the Circumstances but never ever can uncover something that I feel I would like a lot more for the cost.

Comment:
Solid. Cool. Best-side fan expansion. Bottom PSU. None as yet. Fantastic case to save dollars.

Comment:
Sturdy, three fans, top quality built none so far

Comment:
Wonderful case, tons of space for almost everything you want to put in it! Adore the 3x120mm fans, and I put 3 far more and the temp of the mobo dropped to 26 from 32!!! The front USB ports are not actually straightforward to use, kind of difficult to plug stuff in it. Other than the USB ports at front, that's a good case especially for the buck you pay!