Tuniq TX-2 Cooling Thermal Compound

Comment:
Less expensive than arctic silver 5, looks virtually like it, and performs improved. It's sticky so don't get any on your hands.

Comment:
It kept my CPU at 34 C at idle. (Ambient temp was 23 C.) I didn't have any difficulties spreading it on each the CPU and the heatsink. Someday I'll test it on full load... None, genuinely. Just be careful you don't place also considerably. I almost created a mess, and I didn't have any remover on hand (Tuniq TR-1). Intel Core i7 920True (Thermalright Ultra-120 Intense) 1366 RT heatsinkNoctua NF-P12 120mm fans x 2Noctua NF-B9 92mm fans x 2

Comment:
comparable to arctic silver five, dependent on which comparison you read (generally outperforms it initially, but after arctic silver 5 has cured, it's pretty close). came no cost with my sunbeamtech core get in touch with freezer actually tougher to spread than arctic silver five if you use the card approach like a lot of individuals, i'm utilised to spreading compound on my cpu utilizing a card. works excellent with arctic silver, which will smear into a thin layer, and you can get a good even coating over the entire surface. with tx2, employing a card will truly tend to scrape compound, and just push it about on the surface rather than spreading it evenly. ended up utilizing two-3x more compound to get an even and total coatingon a side note, amd phenom ii x4 965BE OC'd to 3.8ghz @ 1.4375 vcore, idle temps 30-32c, load temps ㅪ-51 working with sunbeamtech core get in touch with freezer in a cm690 situationalso, lol @ newegg citing abbreviation for arctic silver five as inappropriate

Comment:
Keeps computer at about typical temps like 34c idle 45c max 45c max

Comment:
Non conductive!! This thermal compound is a lot far more forgiving if you accidently get some on your other elementsKeeps my new AMD 6 core less than 33 degrees along with the Corsair H50 CPU water cooler even when overclocked to 3.85 GHz This compound is a lot a lot more runny than what I am employed to, as an alternative of spreading like a paste it oozes out around the CPU even if a tiny as well considerably is employed.

Comment:
Slapped it on my Q6600 with a V8 by cooler master. I iddle among 27 to 34c... 45c at complete load. Incredibly good product, not as well tricky to spread. I just put a couple dabs in the middle and spread it with an inside-out sandwich bag. Plenty for multiple applications. Going to put it on my video card, as well. The shipping is annoying... things weight is only a couple of grams and it's tiny. I'm new to the game, and I place this in with a entire new system so my opinion is not based on item comparsion. I just know I'm pleased with the benefits.

Comment:
This is what comes with the tuniq tower 120. Does'nt taste good. This is extremely very good stuff. I recieved a small quantity to attach my 120 tuniq to my cpu/board and I evidently place it on proper, cuz when operating prime95 it under no circumstances got past 44c on an E8500 overclocked to 4.two and then it reached 44c as soon as and hung out at 43c thru the testing. Fan was running around 1750 rpm. I will purchase this when I require additional high finish thermal compound. Go figure, companies who make heat sink and fans for cpu's end up making darn fantastic thermal paste.

Comment:
Does what it's supposed to. HD4830 applied to idle at about 38C and now goes as low as 33C doesn't do laundry:(

Comment:
Applies incredibly thin for exceptional thremal transfer. Non-conductive so you needn't worry about excess item shorting out your CPU or mobo. Non-toxic and RoHS compliant so you don't have to manage it like nuclear waste. Syringe has a small window on the side for noting how considerably compound remains. Only the outrageous shipping cost! Now and then this item has sensible shipping rates. The rest of the time, anticipate to spend the exact same as the product just to ship it unless you are acquiring other parts at the very same time to get the discount rate... Removing the factory applied grease or pad and as an alternative utilizing this compound has lowered the temp by at least 5-8C on just about every heat sink encountered so far. I'm nonetheless working with the very first tube I bought but wanted a spare. Have so far accomplished 3 CPUs and count on an additional three before it runs out.

Comment:
Low-cost, does its job. Comes in a syringe for easy application. Needs some burn-in to be truely productive. Temps are four-five degrees cooler than the stock HSF glop. None at the moment.

Comment:
Incredibly uncomplicated to apply and cleanup, low-cost, non-electrically conductive newegg shipping fee Most likely the best aftermarket paste to acquire. I was pleasantly suprised how simple it was to worked with after using Arctic Silver 5 for years. The TX2 provides you far better temperatures and is so considerably less complicated to work with and is less expensive.

Comment:
Good compound, brings the temps down a little more over stock stuff. non-conductive none

Comment:
I put it in. I have by no means put in thermal grease just before. It used the credit card technique and it was so effortless.My cpu before when gaming would get to a dangerous level of 80-85 celcius. Now i cant even get it previous 55. Im actually happy with this. Properly worth just a handful of dollers. None so far. Even though its inexpensive.... i do like free of charge.... not that it will ever happen. I also purchased the evercool fox-1 fan. Combined they have brang my case temp. down a.... lot.

Comment:
Effortless to operate with, does a very good job when applied appropriately none Premium thermal compounds all have comparable functionality when applied properly. What tends to make stuff like Arctic Silver well-liked is that you can apply also considerably of the stuff with no seriously compromising thermal efficiency - that's why you get numerous n00bs who say "ZOMG, this stuff is far better than xxx!ŋ!". I like the consistency of Tuniq TX-two for HDT heatsink applications.

Comment:
High quantitynon-conductableworks with my Cooler Master to hold my CPU at 21 C at idle and 39 C at complete load Don't know what to do with the rest

Comment:
Effortless to use particularly if you use the "line strategy" as described at the Arctic Silver web page. It came out fine with out any mess but it doesn't conduct so it's a small safer than silver containing material. My temps seems like other individuals on the forums and are inside Intel specs at all instances. Don't admire the stuff. Place on the cooler and secure it. Improper cooling mounting is a widespread bring about of truly high temps so make sure all is secure. The TX-two will do its job if the human does. A single of the easiest decisions of the build right after performing web searches and reading reviews. How can 90% of Newegg reviewers be wrong? Try it - you'll like it.

Comment:
Effortless to spread,non-conductive, instant drop in overall tempsOhh and for half the value of other individuals. None seriously other than you do seem to have a bit of restricted 'working time'. [tens to get a bit dry]I prefer to dot-spread and lightly 'tin' the heatsink location that makes get in touch with. with cpu / gpu. Will surely advocate and buy and use once again.

Comment:
works as advertised, consistency is fine, sufficient for a several cpus. none so far I saw some evaluations that this was a very runny liquid, but I tested a bit on a piece of paper before applying on the cpu and mine was not runny.

Comment:
Kept a "non-overclocked" satisfied at 36 degrees Celsuis, two degrees decrease than the integrated paste on the stock Intel 775 fan. The opening for the paste is kinda large and the stuff flies out. I feel I have wasted half the paste I applied due to me scraping it off with wax paper and tossing it... Its thermal paste, non-conductive, does the job, affordable, buy it. Also don't buy Arctic Silver, they are the Monster Cable rip-off of thermal grease.

Comment:
excellent TIM droped my temps 5C. was using evercool thermal compond. there was an air bubble in the tube so when i 1st went to aply the paste it sqirted to considerably out. my pII 720 be runs 28C idle and 45C load. was 34 and 50 C.

Comment:
I was leery of trying a inexpensive paste, but to my surprise its working fine. Beneath Prime95 my temps @ max load under no circumstances hit above 60C with stock HSF. I'd say possibly three-four days immediately after application when i ran the test the initially time, so burn-in did not take incredibly extended. SHIPPING!!! I ordered this with a video card AND a crossfire bridge and had to pay shipping on this and the bridge cable separately. (all shipped in the identical box, I'm positive the paste and cable did not even come close to half a lb.) AMD 965BE CPUCoolerMaster HAF 932 Situation

Comment:
This thermal paste is significantly more affordable than AC5, yet it performs just as properly. The purpose why I purchased this was simply because I had my AC5 for more than a year and the tube was running low. Amazingly, this TX-2 paste performs just as well as my AC5 did but at a substantially lower value... in fact, most thermal paste need to perform at the exact same level if they're applied correctly. It does get a bit dry immediately after a even though, but it doesn't impact temperatures and it's does become simpler to wipe off when you want to replace it. I stuck this paste onto my Intel Pentium E5200 that I have overclocked to 3.96GHz with a ฮ aftermarker RocketFish Universal CPU cooler from Greatest Get. With Prime95 operating for more than 24 hours, the high was just a small more than 60C. But that's respectable given that my E5200 is running at 3.96GHz.I also applied the X technique to apply this compound onto my E5200. The spread approach, on the other hand, will result in air bubbles when you put on the heatsink.I ought to try the smiley face strategy next time. I heard it operates great also.

Comment:
This stuff operates like a charm. Keeps my CPU great and cool. None.

Comment:
I have a 3 year old Intel 1.86ghz conroe dual core so needless to say, I'm pushing it a bit. I was finding anoyed at the heatsink fan noise so I checked the temps and found them a tiny high for my liking. I applied this stuff booted up and saw an instant drop of five° C across the board. Did a anxiety test in prime95 and saw a 7 degree improvement below heavy load for 30 min. None that I can see. Operates as advertised. I'm not an overclocker but I feel this is a good product for anybody who likes to retain their temps low. It's nicely worth the value and newegg's price tag is the best I could uncover on the net.

Comment:
Every person knows this is one of the very best performing compounds out there, and it won't cost you too substantially income just since it has a big name. I haven't been in a position to use it yet. Newegg ships rapidly.