NZXT 9.84" 24 Pin Motherboard Extension Cable

Comment:
This point will save you a lot of time. It fits in my 24 pin energy cable, and it functions. It's a little stiff, but bends and conforms quite effortless. Thank you NZXT, I love it! Mine arrived with the bag opened. Not positive why it was opened and why it was even shipped to me opened. You would consider the person packing my order would see that the seal was broken and replace it with an unopened one particular. Right after all, I didn't order an "open box" item. I was sort of worried at 1st, but immediately after plugging it in and seeing that it was functioning, no biggie. I was wondering, if I recieved an open box item, but was charged for a retail item, shouldn't I have been charged for an open box item? IDK.

Comment:
Looks excellent. Substantially easier than getting sleeves and doing all of your cables. A little stiff, which tends to make it search a small funny in my case due to the fact there is a crease from where it was bent. My arrived open, which I'm guessing is just a packaging problem considering that I didn't order mine from newegg like the other reviewer did. They aren't as good as the stuff that Nils from mdpx-x provides, but it's a lot easier if you don't have OCD. This cable was way longer than I needed, but some of their other cables (the 6pin vga) are way too brief. What's up with that?These aren't as tightly woven as the sleeving kits that Nils sells, but mainly because NZXT utilizes black wires beneath the black sleeves, you genuinely can't tell, particularly as soon as it is in your tower.

Comment:
Looks nice, did what it was supposed to. Is it a cable? Does it transmit one thing? Yes? Okay, no cons then. Pretty solid, looks about like it does in the image.

Comment:
This cable performs Wonderful with my HP xw9400 workstation motherboard (TYAN n6650w) in my Corsair 700D. Not only does it let my 24-pin cable to reach, but it gives it an all-black appear, which I require much more of with my green motherboard. None, it does what it's supposed to. White letters on the heat shrink. Eliminate them and this will be ideal.

Comment:
Attractive and economical way to add some length to brief PSU cables, whilst dressing up your situation's interior. Even if you have sufficient cable length on your power provide, the individually-sleeved cables appear sharp and make cable management above the motherboard tray simpler. None. These cables and the other people in the line are almost mandatory in my builds now. I like these cables - they're low-cost enough to make individually sleeving your cables unnecessary for any but the most OCD of Computer builders. Match it with the CPU and PCIE versions to complete the appear.

Comment:
I typically make these issues myself...but at this value point,I could'nt make it more affordable. So I purchased and modified to suit my demands. :D Really few on my end. One,I'd adore to see plain black heatshrink utilized instead of printed w/ dielectric properties and model #'s. Two: The sleeving is'nt full coverage as other people have reported,they are mistaken. It is decent coverage,don't get me wrong...but they use black wire to hide the truth that they use substandard sleeving.(a thing that pretty much all corporations do) Way more affordable than using the sleeving services of pc mod stores....but the top quality is a bit below par compared to their (or my) work. Even so,at a ๕ price difference...ya just can't argue.

Comment:
Not transparent at all even when bending the wires as far as they will. Precisely what I've been hoping for. Fabulous price tag to outcomes ratio. Took mere minutes to install. Extra cable length in smaller sized cases may possibly pose a difficulty. More colors would be wonderful. Ultimately a organization that pumps out some high quality sleeving at an particularly attractive price tag. This here is some wonderful sleeving. As I mentioned earlier the sleeve is not at all transparent or see-through like numerous other kits on the industry. Those of you familiar with M***-X or M*****M*d kits will be pleased to know that you can ultimately obtain the very same level of individually sleeved and shrinked cables with out the high price and voiding your power supply warranty. These points undoubtedly appear the part.

Comment:
Ideal length for my Corsair 800D to permit me to work with the additional length for cable management. None Individually sleeved, just indicates I will have to put a zip-tie or two on it.

Comment:
it works and looks good na

Comment:
The cables are pretty stiff, i was hoping they would be a little more loose. I also wish the cable was 1-2 inches longer, it would make it easier to hid for PC's with bottom mounted PSU. Maybe they could released a second version of the cable that is longer. Either way this is a great product and an affordable way to get the murder mod look without investing in tools and spending a lot of time sleeving your own cables.

Comment:
* This product in and of itself, will be saving me hours of operate!* Black sleeving, black shrink warp, black connectors.* Fantastic for larger Pc cases (Obsidian in my create)* Much better airflow* Unmatched aesthetics* Unbeatable Cost * Not a item con, but those who have bought kits to sleeve their cables and took the time to do so, will most likely be a bit sad. I was quoted from a properly known custom Pc shop on the web, ū per cable to have this completed. I opted to acquire my own sleeving kit, was waiting on my tools to do it--now I have saved the time and energy. I will still end up employing the tools/sleeving kit, but it's nice to know that for < ษ I can order all the pre-sleeved cables for future builds.

Comment:
It's a 24-pin sleeved ext. cable. Works great out of the box. Definitely makes your cable mess looks a lot prettier in your case.

Comment:
looks great! they also got rid of the white lettering, either that or i just got lucky with my cable. not definitely a con but it isn't very flexible. mine came creased the opposite way i needed it to be to plug into my motherboard. it should be packaged straight/flat.

Comment:
Looks terrificEasy to route due to individual sleevingQuite a few complaints had been against the shrinkwrap having the white lettering on it, but mine didn't have any so perhaps NZXT wised up and listened to the customers and changed this. None Glad to see NZXT changed the shrinkwrap.

Comment:
Not a bad purchase because you might need it again someday but if I had know I'd probably measured up carefully my PSU cable as I could have saved up the price which could gain a lot by being cheaper.

Comment:
Have employed numerous, and all work fine. This is a fast and dirty (and low cost) way to get a custom appear. I construct a lot of open air cases, and also use multimedia displays in quite a few builds. In both kinds of builds it's tough to get a completed look without having a lot of work. Now I use this item for these projects - it is lengthy enough to hide the original 24 pin connector somewhere, or particularly nice when you need to have to insert an extra 24 pin splice for a multimedia bay (iMON-kind) display. None. Not pricey compared to performing it by hand. The tech flex you would use would cost a great deal more than this. I have painted these a couple of times (using paint for plastics, such as Testors) with wonderful results. Makes them a bit stiffer, but no difficulty. Used in Lian Li T1 and other test benches, and in my personal Microcool Bancetto 101 - looks definitely awesome. Highly recommended.

Comment:
This was a very nice addition to my system, not just for looks but for practicality in cable management ans PSU changes when needed.Using this I can disconnect power to the board on the back side of my system in the cable management area. This way I don't have to disconnect any water cooling tubes etc if they are in the way when trying to get the 24 pin power plug out of the board.

Comment:
Affordable and painless way to get the individually sleeved appear to your motherboard power connectors without the hours of frustration or want to void your power supply warranty. Works as intended, and looks fantastic. None - some individuals created comments about white lettering on the heat-shrink, but it looks as although NZXT has addressed that complaint.

Comment:
I bought this cable for the sole purpose of improving the looks of my case. I own the HAF X, so i want to have the visible areas as neat as possible. This cable looks so bad-ass its not even funny. People think i murdermodded my pc, exactly what i want them to think. I plan on buying the pci-e adapters too for my future crossfire setup. the cable is like 12" long, so it made more of a rats nest in the back of my comp, but thats ok.

Comment:
Does what it's supposed to do nicely, the quality of the sleeving is really good, looks great in my new build which has an all-black theme.